To Top

Year? CJ-2A Tucson, Az $300

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

It’s a parts jeep night!

“cj2a willys (no title) missing hood windshield and tailgate and original engine trans/transfer case, i have both drive shafts and steering column and misc. parts.. i am throwing in a ford 300 straight six and 3 speed transmission,, any questions give me a call 520-282-2033… $300 obo thanks”

http://tucson.craigslist.org/cto/1820037620.html

 
To Top

1947 CJ-2A Riverside, CA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $550

“1947 Jeep Willys CJ-2a with an old 1946 title. Comes with an MB style windshield. No engine but has stock transmission. Floors and body need work. Good project or custom hotrod. Can deliver a reasonable distance for gas. ”

 

 
To Top

1946 CJ-2A Wellington, Co **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Were $2700.

This looks good.

“1946 Willys; 1964 – 327 chevy 300 HP Motor; Blue – Rollbar; This thing is quick and powerful!!! $2700 Cash”

 

 
To Top

1948 CJ-2A Xenia, Oh $3500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

This needs a new flywheel ring.

“1948 Jeep Willys CJ-2A. Good Body – no rust. Runs good, but needs new starter ring gear for 97-tooth flywheel. Stock engine – 4 cyl. 2.2L 134 cu. in. New tires. New battery. Electrical system converted to 12 V. Includes original extra gas can. Asking $3500 OBO. Contact us anytime at 1 (800) 992-7053.”

http://dayton.craigslist.org/cto/1818305411.html

 
To Top

1946 CJ-2A Lincolnville, ME **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3000

“1946 Willys CJ2A project for sale. I bought this jeep in New Hampshire last fall from a guy who said this jeep was “Done Right”. Well, my inexperience paired with my enthusiasm for the jeep impaired my vision. When I started sanding the bondo bubbles, I found that the whole back end was gone. I hired a guy to cut it all out and replace everything with 16 gauge steel. Now that everything is metal and this jeep is solid I am looking to sell it to someone who has the skills to finish the project and live the dream. Needs some bondo skimming over the grinded welds and where the new steel meets the old. It needs a radiator bracket fabricated to hold the brand new custom aluminum radiator that I bought for it. It needs a bracket modification to fit the alternator back on since I put a shallow water pump in. then this jeep should be ready to cruise around town and off road. There are other things of course, but you get the idea. It ran and drove when I bought it last fall. It just needs to be put back together.

the good: Has YJ leafs springs in the front which give it a big lift
Has a running 327 sbc motor
Has a muncie 4 speed
Has 34″ super swampers in 80% condition
Its all solid steel
Now its “Done Right”
Frame is Solid
Custom Dual side exit exhaust
all new brake lines”

 
To Top

1949 CJ-3A Visalia, CA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was 3000

Lots of work done here.  It needs a fuel pump at the very least.

“1949 Jeep CJ3B 305 TPI TH400 Ford 9″ Rear with Detroit Locker, Dana 44 Front, 4.56 Gears, Disc Brakes up front, power steering, power brakes, vehicle is stretched on a CJ5 frame, vehicle is a project and needs some work, currently needs a fuel pump to get running. I currently have the fenders off. Currently registered non-op, registration is current.”

 

 
To Top

1950 CJ-3A Lakewood, CO **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

1950_cj3a_lakewoodUPDATE:  **SOLD** Was $1595.

(05/05/09) The body looks a little rough, but it runs.   It looks like a good price.

“1950 CJ3A, about 62K original miles, factory drivetrain, 4 cylinder flat-head, newer solex carburetor, rebuilt transmission and transfer case, new brakes, new tires, hasn’t left town for 30 years. Runs excellent, needs top.”

 
To Top

Year? M-170 Forestville, Wi $4500

• CATEGORIES: M-170 • TAGS: , This site contains affiliate links for which I may be compensated.

This appears in pretty good shape.

“I have to many jeeps and need to make room, this is a very good looking M-170 Ambulance Jeep, recently painted and many new parts.. neuby47@hotmail.com”

http://appleton.craigslist.org/cto/1818617565.html

 
To Top

1960 CJ-5 Fountain Green, Ut $200

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

There is plenty of value for the price if you are near this.  This appears to have some old dualamatic hubs as well.

“1960 CJ5. Tub is in decent shape but needs floor. Hood and grill are straight. Fenders are ok but need work. It has transmission, transfer case, front axle,frame,and springs. The rear axle is there but missing ring and pinion. I have a signed duplicate title.$200.00 firm will not seperate. Call Bryon @ 435-262-0100. Can deliver for a fee.”

http://www.ksl.com/index.php?nid=218&ad=11373091&cat=402&lpid=1&search=

 
To Top

1979 Land Rover Logan, Ut $15,000

• CATEGORIES: Other 4x4s • TAGS: This site contains affiliate links for which I may be compensated.

Brett spotted this.  It looks nicely vintage.  I don’t know if this is a good price or not.

“Runs great. Very clean. 29,000 miles. Great shape.”

http://www.ksl.com/?nid=218&ad=11383574&cat=402&lpid=&search=

 
To Top

1947 CJ-2A Rathdrum, Id $1500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $1500

(06/15/2010) I think it is time for me to create a post on how to take a good picture, issues of light/shadows, what to take, and what not to take ….

“1947 Willys CJ2A LIFTED, 33″ MUDDERS, 15X10 WHEELES, NEW MASTER CYLINDER, RADIATOR, SHOCKS, STEERING STABALIZER, ALL NEW OUTPUT SEALS ON TRANSFERCASE AND FRONT AND REAR END, ALL NEW U JOINTS ON BOTH DRIVE LINES, NEW ALTERNATOR, WIRES, PLUGS, POINTS, CAP ROTOR, COIL, AND WIREING. CALL JIMMY AT 208-687-1846 OR E-MAIL j1f150@yahoo.com”

http://spokane.craigslist.org/cto/1820043059.html

 
To Top

1943 GPA Sint Jacobiparochie, Netherlands eBay

• CATEGORIES: Unusual • TAGS: , This site contains affiliate links for which I may be compensated.

Gerben asked me to let readers know he was selling his GPA.  He’s managed to take some unique pics, so there are some good views.  I especially like the way he’s managed to lift the back and front (using a crane?).

“Ford GPA Amphibious jeep. This is a NOS (yes, new old stock) hull that was never used. I know for sure because I have drilled all of the holes for the springbrackets myself when we put the frame in for the first time. We inspected the wheelwells very carefully and sanded of the paint to see if there were holes welded. It was all flat sheetmetal and the only holes present were the ones for the shockabsorber pins and the breaklines

Some repairs are done due to sitting outside for perhaps years. The toprail on the left and rear part and some small parts of sheetmetal have been replaced. This was not done by me, one of the previous owners did that a few years ago. After that is was shotblasted and painted again.

The axels are rebuilt with new bearings, seals and brake parts. 4 new Firestone tires on original split rims.  The frame and all of the other parts are used and from other GPA’s

All of the hard to get special GPA parts are there such as surfshield, bilge pump with 3 way valve, 12 volt generator, PTO for the propellor and pump, capstan winch with PTO and bracket on the engine, 6 blade fan with shroud and GPA radiator.

The engine is original GPA but has a crack above the distributor and needs repair. I will include a Ford GPW engine that runs good. The gearbox, transfercase and PTO are rebuilt and ready to be mounted.

The dash, front and rear deck, floors, frontseats are in great condition and only need minor repairs. Bottom of the rear seat needs to be replaced. The original fuel tank is in bad condition. A new handmade exact copy reproduction tank will go with the vehicle.

I think about 10% of the needed parts are missing. There is no title with the vehicle. A bill of sale only. The GPA is located in the Netherlands in Europe and can be viewed by appointment. I will sell worldwide and help on this end, but it’s up to the buyer to arrange and pay shipping.”

View all the information on eBay

Continue reading

 
To Top

Willys #48 Koenig dual stick PTO Gresham, Or $600

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

It looks in great shape.

“Rare dual stick Koenig PTO. Gone through by Nick Miller. Fits Willys wagon or pickup.”

http://portland.craigslist.org/mlt/pts/1816689678.html

 
To Top

CJ-2A Rock Crawler Project Helena, Mt **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $800

Here’s a project!

“cj2a it has been stretched 12″. its on a tube chassis, full width 3/4 ton axles. dana 44 front and a full float 14 bolt rear, 4″ lifted springs, 8 point roll cage. all it needs is an engine and tranny. it is set up for a 350/350 with either a 203 or 205 t-case. has full canvas top with doors. 800 OBO”

 

 
To Top

1945 MB Ventura, Ca $2990

• CATEGORIES: MB • TAGS: This site contains affiliate links for which I may be compensated.

This looks good.

“1945 JEEP WILLYS, 283 V8, OVERSIZE DRUM BRAKES, FRAME HAS BEEN BOXED FOR STRENGTH AND EXTENDED IN THE FRONT FOR GM STEERING BOX, 3 SPEED TRANS, DANA 27 FRONT AXLE AND DANA 44 REAR. NEW DRIVELINES, 538 GEARS, 15X10 SLOTTED MAGS, ALL STEEL BODY WITH NO RUST, RUNS WELL, NEEDS CLUTCH….GREAT PROJECT!…$2990.00. CALL BILL @ 805-432-9111”

http://ventura.craigslist.org/cto/1817993016.html

 
To Top

1947 CJ-2A Cumberland Gap, Tn $5000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

That almost looks like a DJ-3A body based on the dashboard.

“1947 Willis Jeep, has been completely restored. Under the hood is a V6 motor- 3.8 Commando AMC with only 500 miles. Jeep has 1974 frame and running gears out of a C-J5. New Kaiser top,and new brakes. Tires are in very good shape, 1250-32 x 15. Interior is in good shape with racing bucket seats. Have title in hand. Must see to appreciate, more photos available. On site buy only. Will consider possible trade to S-10 Pickup 1995 and newer. My cell: 423-489-7558 and ask for Billy.”

http://lexington.craigslist.org/cto/1813794595.html

 
To Top

1947 CJ-2A Nevada City, Ca $5000

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

This looks in good shape.

“1947 Jeep Clean ‘Stock” Frank 530-470-8403 $5000. OBO”

http://goldcountry.craigslist.org/cto/1812581837.html

 
To Top

1954 M-38A1 Arvada, Co **SOLD**

• CATEGORIES: M-38A1 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was Make offer

This looks like a pretty nice rig.

“54 willys m38 a1 korean military jeep. Beautiful restoration. way too many things to list. call bob”

 
To Top

1969 CJ-5 Gray, Me $1250

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

This looks good for the price.

“1969 jeep cj5 4 cyl. 3 speed 4+4 runs and goes take trades boat,4 weeler,car or truck. call greg at 207-607-3562”

http://maine.craigslist.org/cto/1815018035.html

 
To Top

1963 CJ-5 Delta, Co $3500

• CATEGORIES: CJ5 • TAGS: , This site contains affiliate links for which I may be compensated.

I wouldn’t say this is in ‘excellent’ condition, but most of it looks pretty good.

“1963, 4X4, 4 CYL, 3 SPEED ,REMOVEABLE HARD TOP,87K, NEW TIRES, IN EXC SHAPE. 3500.00 CASH OR TRADE. 1/2 TON 4X4 FORD TRUCK OR TOYOTA. CALL 970-874-6831 OR 970-234-6831”

http://westslope.craigslist.org/cto/1816016654.html

 
To Top

1957 CJ-5 Spokane, Wa $8000

• CATEGORIES: CJ5 • TAGS: , This site contains affiliate links for which I may be compensated.

This jeep sports an unusual cage.

“MAY TAKE FOR PARTIAL TRADE,  350 HP 350 CHEVY ENGINE, ACCEL IGNITION, ELECTRIC FUEL PUMP, 100 AMP ALTERNATOR, ELECTRIC FAN, SM420 FOUR SPEED, SCATTER SHIELD BELLHOUSING, T-18 TRANSFOR CASE, DANA 44 FRONT/REAR/538 GEARS, DETROIT LOCKERS, CUSTOM DRIVELINES, CUSTOM FRONT/REAR BUMPERS, NEW PAINT, FULL ROLLCAGE, CUSTOM 25 GALLON GAS TANK, TILT STEERING, SUMMIT SEATS GROUND LIGHTS, HEADERS AND NEW MUFFLERS, FULL BIKINI TOP, ALL GAUGES AND TACH, NEW 34X9.50 SUPER SWAMPERS, SPRAYED BED LINER.”

http://spokane.craigslist.org/cto/1804317784.html

 
To Top

1954 Panel Wagon Coeur D Alene, ID **SOLD**

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $550

“I have a project 54 Willys panel wagon. It has chevy small block motor mounts with auto trans crossmenber. It has a 305 in it that ran when it waspulled. The floor pans are rusted out but i have new ones that need fitted and welded. there is definitly some work that needs to be put into this thing but its a super cool kinda rare find. There is NO TITLE but the motor vehicle inspector will give you one fairly easy.”

 
To Top

1958 Truck Spokane, Wa $2500

• CATEGORIES: Willys Trucks • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(06/03/2010) This looks like a good price. It includes a plow.

“I am putting up my 1958 Willys for sale. I bought this last year after searching for a truck for some time. I have a child and a stay at home wife now, so truck must go. It starts and runs every time. I has the original 226 super hurricane motor and running gear. It is 4 wheel drive. These are originally rated as a 1-ton truck. It does have a plow for the front. I do not know much about it, but bolts right up to the bumper brackets and has an electric winch on it. The past owner plowed his drive with it. I bought this truck as a hunting rig and it worked great. I was able to drive back and forth from freeman in rain or snow. I also have chains for all four tires. This truck would be a great start for a restore job, mud bogger, or a rat truck. Email or call, I will get back as soon as possible (509)280-2257 Ian.”

http://spokane.craigslist.org/cto/1808077234.html

 
To Top

1947 CJ-2A Nine Mile Falls, WA**SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $700.

Dan forwarded this ad. I think ROUGH accurately describes this project.

“1947 Willys Jeep with clear title. Has original engine. Motor was running when last parked. But needs work. Great father & son project!  NO TRADES! NO TRADES! Not trying to be rude but I want to get rid of this not trade it for another…thanks.”

 
To Top

Sand Drag Jeep, Southern California eBay

• CATEGORIES: Racing • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  This is back on eBay

(06/09/2010) Fun and fast.

“This is a very unique Willys CJ2 Jeep built to have fun in many different situations and is why its called 3 Dimensional. This Jeep is a very consistent multiple ASDA and NSDA sand drag event winner and runs in 4.0 to 4.20 second range to 300 feet at about 76 mph. However it also equally comfortable at the dunes and can run all day on a tank of gasoline. Lastly it is registered and licensed for the street and would be a bunch of fun with the proper tires. The Jeep sits on a 112″ wb Twisted Tubes Fab chassis and the body is by Mallet. This is a very well built, seldom seen example that was constructed with only the best parts.  I will try to detail the vehicle here as much as possible but if you have a question or would like a picture of something specific please feel free to ask.”

View all the pics on eBay