UPDATE: **SOLD** Was $1500. DJ-3A with 4WD upgrade.
(08/28/09) This looks like a great deal on a flattie.
“I have a 64 willys jeep with a buick v-6 in it runs great 4×4 it’s a lot of fun 1,500”
UPDATE: **SOLD** Was $1500. DJ-3A with 4WD upgrade.
(08/28/09) This looks like a great deal on a flattie.
“I have a 64 willys jeep with a buick v-6 in it runs great 4×4 it’s a lot of fun 1,500”
UPDATE: Was $1500.
(12/09/09) This might be a great price!
“For Sale-1946 CJ-2A for sale, An all original unmolested survivor for sale. Runs! Complete! Flat Head Four cylinder. 6V Plywood Hard top has been taken off. Minimal Rust. More Photos upon request.”
This seller was selling 2 47 CJ-2As and 1 48 CJ-2A
“I have a 1948 CJ2A Willys Jeep for sale. It is all original with flat 4cyl, 3 speed, Dana 18 transf. case, side mounted spare, non directional tires. It has been converted to 12 volt. It has always been shedded. It RUNS and DRIVES even though it has set for a couple years without running much. I started and ran it 30 days ago. The body is in great condition for its age very very little rust. Windshield frame and glass in great condtion, tailgate great condtion. Lights work ect. I can deliver to denver area if buyer pays for shipping. Cash Only. NO SCAMMERS. I will trade for a modified trail jeep with 33″-35″ rubber. Preferably Flattie,or CJ in good condition. If you have questions please call 308-325-2858. Serious buyers only. NO SCAMMERS NO CRAP TRADES NO LOWBALLERS”
UPDATE: **SOLD** Was Make Offer
(11/19/09) The driver’s indents are gone, but the lack of a gas inlet suggests they might be filled in or replaced. It’s got MB fenders, but I suspect the grille might be a CJ as is the windshield.
“I have a 45 willys for sale or trade. It has a 350 v8 munzi 4 speed dana 44 rear and 25 front. ”
UPDATE: **SOLD** Was $2400.
The seller says the entire body is painted with bed liner. I’m assuming that means the outside too? I’m hoping my assumption is wrong, as the body looks straight and clear of rust.
“1948 jeep willys CJ2A, frame off resto, frame painted, new paint on body, new master cylinder, new brake hoses flex, recent oil change, recent coolant change, new mini high torque starter $390.00, new 12v alternator $185.00, flat head L head engine runs, tranny and tcase have been rebuilt. has back seat the one with storage box underneath. brand new tires, mostly original except alternator and starter upgrade. tow bar,
Body is completely bedliner coated then painted with Cardinal Red pearl coat.
Needs ; front seats, gas tank, some wiring, will run and start., needs wheel cylinders, shoe linings. have new windshield wiper motors in box, original parts in box such as speedo. I am sure I am forgetting things, Is a bit dusty from sitting in garage. Have CLEAR TITLE, Moving and can not take it with me. I have alot more invested, it will make someone a great jeep.”
It’s cool, but it’s a CJ-3A not CJ-3B.
“CJ3B Aluminum one of a kind. Pictures speak for themselves. POLISHED aluminum… Detailed replica of CJ3B flat fender… Aftermarket AFW frame. I acquired this Jeep CJ3B through a long history and I just do not have the time to complete the project. My loss your gain… The original fabrication cost of the body and frame is over $12,000. Motor mounts are for a Chevy 350, or Vortec V6, Buick v6 etc… 44 difs no gears. The wheels and rims pictured may not come with the vehicle… very scratched rims etc… not worthy of this show piece. Price is $8,500 negotiable, motivated to sell in 2009.”
It looks like a fine jeep for only $2200. I’m not sure the ‘crawler’ poses are the best way to sell this jeep.
“1959 willys jeep. original. Title in hand. collector vehicle plates. GREAT PROJECT!!!! 134 C.I. F-head. 3 speed man. New BFG mud terrain tires, new clutch, new Deka battery. Comes with cloth/vinyl top and doors, PTO winch and driveshaft/gearbox (NOT INSTALLED) runs/drives fine. not a daily driver though. open to trades on guns/ammo, motorcycles… welding equipment, tools…”
Here’s a buyer for a snow plow in Montana.
“I have a 1953 CJ-3B that I would like to put a plow on. Doesn’t have to use a winch or be too fancy, just something that I can use to push the snow out of my driveway. I am located out by alberton. Thanks!”
Here’s a cool knob.
“THIS BRAND NEW HEAVY DUTY COLLECTIBLE GEARSHIFT KNOB FITS MOST DOMESTIC AND IMPORT CARS AND TRUCKS AND COMES WITH INSTALLATION INSTRUCTIONS, 3 ADAPTER SLEEVES, 1 ALLEN WRENCH AND 3 SET SCREWS FOR EASY INSTALLATION. IT MEASURES APPROXIMATELY 2-1/2″ X 2″ (60 mm x 50 mm) , IT WEIGHTS APPROXIMATELY 6 OZ. (180 gr.) AND FITS FOR COLUMN AND FLOOR SHIFT. IT COULD BE USED AS A PAPER WEIGHT, DOOR PULL, DOOR KNOB, REFRIGERATOR KNOB, BEER TAP HANDLE, WALKING CANE HANDLE KNOB AND MANY OTHER DECORATIVE THINGS AROUND YOUR CAR, TRUCK, VAN, SUV, MOTORCYCLE, HOME AND GARDEN. PLEASE EXCUSE THE POOR PICTURE QUALITY. IT IS NOT EASY TO TAKE A PICTURE WITH CRISP DETAILS OF THIS SHINY BEAUTY. OTHER UNIQUE LOGO DESIGNS ARE AVAILABLE IN MY EBAY STORE. PLEASE E-MAIL IF YOU DO NOT FIND THE LOGO OF YOUR CHOICE.”
UPDATE: **SOLD** Was $3400
(11/10/09) This looks like a very good price.
“This is a rare opportunity to own a real head turner. This is a 1954 CJ3B flat fendered Willys jeep. This is a great driver, electrical system has been converted to a 12volt system, new wiring harness, new tires, and seats have been covered. For more info please call.”
UPDATE: **SOLD** Was $2800.
This looks like it has a strong drive train. I can’t tell how clean the body is from these pics.
“1949 Willye truck jeep 350 motor dana 44 frount end 12 boult posie rear end bran new bf goodritch tires”
UPDATE: **SOLD** Was $2000
Something went haywire in the paint shop.
“I recently acquired this wonderful nostalgic piece of history. He’s name is Emmit and it came with a little history of his journeys and original owner. He has a Chevy 283 V8, 3 speed No Overdrive. The person I bought it from said it ran and all he needs is a starter and new brakes. I have purchased a
UPDATE: Price dropped to $5000. The seller added a pic, which makes the jeep look nicer that the pic to the right.
“This vehicle has a new steering wheel box, brakes, altneator, fly wheel, remanufactured original flathead engine, leaf springs, new military tires, new seats custom upholstred, new primer and red paint. Runs great & restored. I would like to get a truck. Thank you. contact email bmyers4h@commspeed.net or call 928-308-1411 ”
UPDATE: **SOLD** Was on eBay.
Johnny spotted this 5 gallon can and a 2.5 gallon can on Amazon.
Steve spotted this unique item. For reasons unclear, probably related to California statues, the seller cannot ship this to California.
“Sooner or later you’ll have a need to carry quantities of fluids beyond the contents of your coffee cup. Do it right with this stylish 5-gallon stainless steel jerry can, polished to a mirror finish. This heavy-duty can comes complete with a flexible 10in. x 3/4in. filtered spout. A screw vent valve lets you dispense fluids without glugging. The recessed bottom provides an easy, solid grip when pouring. Comfortable top grip for carrying. 14in.W x 7in.D x 18 3/4in.H. *Unable to ship this item to California.”
UPDATE: **SOLD** Was no Price
The seller is interested in some trades, including a “tandem axle enclosed trailer or Toy Hauler such as a roadmaster campmaster, Work & Play or similar. I may also be interested in a Jeep Wrangler, a nice 3/4 ton pickup for towing a trailer on trips, Classic Car in driver condition, several nice items for my gun cabinet or ? Email me with photos, descriptions of your item(s) to trade and your proposal”.
And, from a previous ad:
“You are looking at a Roof Palomino riding mower. There were a few of these produced with the Jeep Body in the 60’s and 70’s by the Roof Mfg. Co. was in Pontiac, IL. This one has had a few very minor modifications from the original such as the roll bars and there has been a couple of holes cut in the sheet metal that can easily be repaired (see pictures) just finding one of these being sold is quite a task. I have decided to sell a few of the rarest garden tractors out of my collection if you know anything about these you will know this is a really good price. This would be a great golf cart or advertising item. Serious inquiries only”
UPDATE: **SOLD** Was $1200
This might be a good price. The body looks in good condition from what I can tell.
“Low hood flatfender willys,with mid 80’s chevy Iron Horse 4 cylinder engine and 3-speed manual transmission. Engine runs and is installed but is not hooked up. New radiator core, 2-1/2″ lift springs, body is pretty strait .Good tires and wheels,Has steering column but not installed.I have original transfer case (doesn’t fit new trans) but nothing installed.4 point cage, no windshield frame or top.”
UPDATE: **SOLD** Was $4000
This is rather pricey project.
“1947 low hood, Chev eng 283c.i., Chev 5 speed trans new rebuild, T-90 transfer reconditioned, 44 rear,27 front, 4:11 ratio on new rebuilds, New 11 inch brakes, new 2.5 inch lift on springs and shackels, all parts here except fuel tank. Body ready for finish.”
This truck looks pretty good. I like the old school slot rims.
“1963 willy’s 4×4 Pickup, 1963 Studebaker engine, Rebuilt Starter, Electic fuel pump, Rebuilt Generator.”
UPDATE: **SOLD** Was $1500.
(06/18/09) This might be a MB body with a CJ-2A from clip.
“runs and drives needs some tlc…….is a 1942 willys… ill take some tools like: brake lathe, or a hydralic lift for cars or just tell me what you got.. thanks….i was going to have this car for a nice proj. but dont have time…”
UPDATE: **SOLD** Was $3000
(11/12/09) This has the column shift.
“1946 Willys Jeep. Original Title. Very Rare 3-Speed Column Shift. Good Condition. Few rust spots but no dents or body damage. Starter will need replacing but other than that it runs great! Alot of fun to drive! Great addition to the hunting lease!”
UPDATE: **SOLD** Was $8500.
“I HAVE A 1947 WILLY’S JEEP THAT IS ABOUT 95% FINISHED AND WOULD LIKE TO SELL OR TRADE- THE JEEP HAS A HIGH PERFORMANCE 350 ENGINE, EDELBROCK CARB AND INTAKE KIT , TURBO 350 TRANSMISSION WITH A CAMARO REAR DIFFERENTAIL. ALSO HAS COMPETIITION HEADERS AND PERFORMANCE TORQUE CONVERTER, NEW TIRES AND WHEELS, RANCHO LIFT KIT, DAUL EXHAUST, DUAL TANKS , BIKINI TOP AND ROLL BARS,,, HAS NEW UPHOLSTERY—TOO MUCH TO LIST -OVER $16,000 INVESTED–LET ME KNOW WHAT YOU HAVE!!!”
UPDATE: **SOLD** Was Make Offer.
Kevin asked me to post this for his friend.
“1948 Willys Overland Panel, 2 Wheel Drive,…. this vehicle will need to be trailer’ed……good quarters, hood and doors, back panel doors are fix-able and rare, roof drip rail in back has some issues….come and get it.”
UPDATE: **SOLD** Was $17500
I wonder what’s left from the original ’47 besides the VIN.
“1947 willys. tube frame, fiberglassbody, 440 ci big block chevy, alum. heads, 400hp NOS system, street legal, hoosier tires, very fast car $17,500.”