To Top

1944 MB Wenatchee, Wa $2000

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

It runs, drives and has a plow.  This might not be a bad price.

“Runs and drives and plow works and has a cheap winch. Body is not so hot. Has the artic frames for the canvas around the head lights. Part of the passengers side has been cut out and someone cut a hole and put a CJ type gas tank in it. Wrong windshield. But engine is military and runs as does the tranny.”

http://wenatchee.craigslist.org/cto/1533562186.html

1944_mb_wenatchee

 
To Top

1948 CJ-2A Lexington, Sc **sold for $4500**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

The auction on this just completed on this very stock jeep.  This was a one-family jeep that looks very solid and appears fairly rust free, though the floor boards deserve some inspection based on the floorboard pic.   This didn’t last long (less that 24 hours) before someone offered the buy-it-now price of $4500.  I’m a little surprised it went so quickly for that much. It does have the original bill of sale (last pic) which is cool.

“I am selling my 1948 CJ2A.  I am located in Lexington, SC.  This Jeep was bought brand new by my Grandfather in March of 1948.  I have the original bill of sale as well as a clear title.  My grandfather passed away in 1987 and the Jeep sat in a barn until 2007.  The Jeep is now in good running order, but I do not have the dedication or the funds to take it to the next level of restoration.”

You can view the Ad here

1948_cj2a_lexington8

1948_cj2a_lexington1

1948_cj2a_lexington2

1948_cj2a_lexington3

1948_cj2a_lexington4

1948_cj2a_lexington7

1948_cj2a_lexington5

1948_cj2a_lexington9

 
To Top

CJ-3B Parts Oroville, CA **SOLD**

• CATEGORIES: Body Parts, CJ-3B, Last Ride This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $400

“Here is a cj2a jeep,no motor,trans,front axle,..Its does have front fenders..for more info call buddy”

 

year_cj3b_oroville

 
To Top

1/2 Scale ’45’ Willys Vancouver, BC eBay

• CATEGORIES: Features, toys This site contains affiliate links for which I may be compensated.

The buy-it-now price is $12000.  The seller includes some pics of other half scale vehicles for sale and they look pretty good.    However, for $12,000 I can buy most any real jeep I want and have money left over for the trailer.

“Our Toy Cars are rooted in the nostalgia and romance of the high-performance British Racing of the past.  Each car is a collector’s item to be passed down from generation to generation. With an assembly time of over 450 hours per unit and a total factory output of 36 pieces per year, these cars are truly a special kind of toy. These high-performance toys are produced with superior engineering, creating an unforgettable driving experience for the young and not-so-young alike.

JEEP BODY: Fiberglass composite, painted with 2k Dupont automotive paint. Chassis: Steel subframe and GRP composite. Measurements: L 68″ X W 35″ X H 30″. Weight: 495 lbs (Crated 561 lbs). Tires: 4.00-8″. Drivetrain: Rear wheel drive – both wheels solid axle. Brakes: Hydraulic twin rear disk brakes, vented disks dual pot calipers with car master cylinder. Suspension: Independent front suspension, solid beam rear suspension. Electrics: 12V. Electric Starter. Working lights, Horn, indicators, back up alarm. Manual Transmission 3 forward,1 Reverse. 150CC- CVT AUTOMATIC ENGINE WITH REVERSE GEAR. Engine Type: 1 Cylinder, 4 stroke, air cooled. MAX POWER/ RPM: 5.6 kw/ 7500rpm. Max Torque / RPM 7.3 Nm / 6500 (rpm). Fuel Type: A90. Maximum speed: 45 MPH. I will help arrange for shipping anywhere in the world.

View all the pics on eBay

New_toy_jeep_1_5_scale_vancouver

New_toy_jeep_1_5_scale_vancouver2

New_toy_jeep_1_5_scale_vancouver3

New_toy_jeep_1_5_scale_vancouver4

 
To Top

1947 CJ-2A Douglas, WY **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was$3800.

(02/21/2010) “Aluminum 1/2 cab, heater 12v alt new gas gauge, new sending unit, 12 v ele fuel pump new solex carb have orig, new plugs, new cap & rotor,point,cond. new elec wiper motor. new temp gauge mech. new spare tire mount, good title, orig steel body New lube in all gear boxs,new battery”

 
To Top

1950 4×4 Wagon Clear Lake, Tx **SOLD**

• CATEGORIES: Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $7000.

(12/15/09) While approximately 90% stock, the seller gives a detailed review of what’s not original about this Wagon.

“It is a 4X4-63 model which was manufactured from January 1950 until March of 1950. It has a conventional ladder-type frame, and features independent front suspension utilizing control arms and a single traverse leaf spring. A three-speed Warner Model TY-96 transmission is used with synchromesh on the top two gears, and a Borg Warner overdrive. It is powered by a 4 cylinder L-head cast iron block and cylinder head engine producing 60 horsepower at 4000 rpm. It is a true 4×4 and has a Spicer fully floating front axle and a semi-floating Spicer rear axle and a Spicer Model 18 transfer case with a 2.42:1 low and 1.0:1 high range and locking front hubs. The shift lever is floor mounted. Front and rear suspension is semi elliptical leaf springs. This was a Texas Hill Country car and has zero rust on the body, frame or floor boards. The only rust is in the hinge area of the tail gate and to be show quality it would need to be repaired, however the tail gate is fully functional and opens and closes very easily:

Ninety percent of the vehicle is bone stock, however the previous owner made the following modifications several years ago.
•Added wood panels to exterior and interior of vehicle to create a “tin woody”. Exterior panels have aged and need to be replaced or recoated. Interior panels are in nice condition. The exterior panels are easily removable (just a few screws) and the body could also be painted to look like a woody as well.
•To establish clean woody exterior, the gas filler tube was relocated to interior of back compartment.
•Original flat front grill replaced with a 1954 V-Grill with cross bars.
•Seats were removed and modern bucket front seats were installed. Original style seats are easily available.
•Vacuum windshield wipers replaced with new electric wipers.
•Electric horn installed.
•Emergency brake installed
•Car converted from 6 volt to 12 volt and three new 12 volt gauges added under dash. (Original gauges are still in place however they operate off 6 volts so they have been disconnected.)
•Engine completely rebuilt. Installed new main bearings, polished crankshaft and replaced seals.
•New starter installed
•Custom made exhaust and new muffler.
•Transfer case seals replaced.”

1950_wagon_clearlake

 
To Top

1946 CJ-2A Granbury, Tx **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1650.

(10/16/09) It runs, but has a clutch problem.

Complete. Has all components. Great project for the jeep enthusiast. Engine runs like a clock. Smooth and quiet. Seems to have a clutch problem. Call (do not email) Jerry for details.”

 

1946_cj2a_granbury

 
To Top

Happy New Year — 2nd Annual Report

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

It’s been two years since I launched eWillys.  The growth during the first year was modest, though not unexpected, since I didn’t have much content and I never advertised the site. Below is what the site looked like originally. Clearly it’s matured.

ewillys_v1

Growth in 2009

In 2009,  traffic grew dramatically, increasing monthly from March through December.  The number of visits per month increased 437% over a 12 month period, reaching almost 70,000 visitors in December.  The number of Monthly Page Views jumped even more, growing 610% for a maximum of 338,000 page views in December.

I suspect the growth reflects increasing referrals from readers, better google results, and successful purchases and sales.  This has lead to more readers contributing their stories.  And, unlike the one complaint I had the first year, I had no complaints this year, which amazes me.  I must have pissed off at least one person?  Maybe I’m not doing something right? LOL.

Finally, the installation of some advertising has created just enough income to cover the hosting costs of the site for the past two years and the cost for the upcoming year.  And, especially in regard to the ebay content, the advertising is perfectly relevant to the site, so it’s a win-win for ebay, me and you.

International Participation

This year readership expanded beyond the US & Canada with readers contacting me from Germany, Columbia, Italy, Phillipines, Switzerland, India, Costa Rica, Israel, the UK and more.  We even got some pics from Afghanistan by US troops, demonstrating that the United States armed forces (probably unknowingly) are backing the eWillys effort.

Readers can now choose from over 5000 posts & pages to view and probably close to 10,000 images (I don’t have a good way to measure this).  I’ve done my best to categorize the posts and pages in ways that provide unique ways to view, learn and enjoy the content.  The eWillys main folder on my computer (which houses the entirety of the photos, movies, etc) has grown to 4.5 GB — reminder to self, back up computer!!

The Platform

During 2009, the folks at WordPress did a fabulous job of updating a stable, dependable platform capable of serving the large amount of content you see daily. They continue to provide significant updates to the platform (in fact, I have to make a major update soon), which has allowed me to easily organize data and provide new types of services at zero cost to me or you — that’s a price I can handle.

Despite all the improvements, there are still somethings I’d like to ad, especially in the content department.  So, there’s plenty of work left to do over the coming year.

The Future

Today, January 1, is on target to be the busiest traffic day ever.  That’s a great way to start the year. I expect to continue meeting the same level of service, tracking the sales/purchases of jeeps, and providing the types of stories I hope you find interesting.

In addition, this year I hope to move more offline with eWillys. For example, I’m investigating the possibility, with Randy’s prodding, of launching a magazine that covers old Willys.  However, instead of being about Willys directly, it would be about the people who own, like, dream or have caught the Willys sickness and their similar interests.  I’m still investigating, so my final decision has not been made.  But, my next step is to mockup an issue, which I have the software to build, and see if I can create what I want.

My second project for the year is to raise the seed capital I need to begin work on my Willys Exploratorium project.  This would include creating a 501c3 foundation and an LLC.

So, thanks to everyone for their interest in this Quixotic Project.  I know I’m learning lots from everyone else and I hope you are learning something new now and then as well.  Have a Happy New Year!

– Dave

 
To Top

Builds: Mike’s 3B build

• CATEGORIES: Builds, Features • TAGS: This site contains affiliate links for which I may be compensated.

Mike emailed me pics of his beautiful custom build this morning.  He’s taken his time over the past few decades to build something nice.  I especially like the heated seats :-).  But, this build isn’t just pretty; Mike takes it out on some ‘severe’ trails in the Northwest with his friend Phil, whose CJ-3A you can see here.

“Here are some photos of a CJ3B that I have worked on over the years.  I have had this jeep for over 20 years.  The frame started life as a 1950 CJ3A but the body was shot and I really like the 3B style.  I purchased a new steel body kit from 4 wheel parts wholesalers and at the time it was on sale and cost $900 complete.

The way it is now is the final version.  The color is Impact orange, The motor is an all aluminum  5.3 L33 engine that only had 6 miles on it.  The transmission is a turbo 350 mated to a Dana 300.  The rear end is a 1975 CJ5 Dana 44 with full floating axles and disc brakes with 4:56 gears.  The front end is a dana 30 with the same gears and disc brakes.   It has power steering and an aluminum radiator .

The interior is 2008 Corvette buckets with power and they are heated (great in colder weather) Lokar shifter, autometer gauges, Flaming river column plus a lot of other things.”

Ins-Jeep-1

Ins-Jeep-2

Ins-Jeep-3

Ins-Jeep-4

 
To Top

Remember to Play with your Willys …

• CATEGORIES: Builds, Features, News • TAGS: This site contains affiliate links for which I may be compensated.

Paul wanted to wish everyone a happy ‘stainless’ new year and to tell you to remember to play with your Willys!

Paul writes, “By 7:30 this morning (Jan 1st) I was back in the garage working on the Willys (fitting the door seal upper attach flanges) and starting my twentyfifth year on this rebuild.  I hope to have the stainless Willys fully finished and on the road within the next two years where folks seeing it for the first time and unaware of the time I spent on this project will deem it an overnight success!  We do have long winter nights and the winter’s are kind of long but not THAT long.  Anyway, after the Jeep is done I have a 1951 military 1/4 ton trailer I plan on rebuilding out of stainless steel to match the Jeep.  This will be an easy job and shouldn’t take all that much time.

After all I’ve learned while fabricating the various stainless parts over the years I figure I could crank out another stainless Willys in fifteen years or so but I have other projects waiting for attention so I believe I’ll stop after completing this one.”

If you haven’t seen Paul’s project, click here.

And a pic of the Alaskan Wilderness:

Alaska_image_paul

 
To Top

Wooden Bodies at Cherrybronco.com

• CATEGORIES: Features, Wood bodies • TAGS: This site contains affiliate links for which I may be compensated.

These wooden Jeeps and Broncos were built by a craftsman named Jack who posted these photos to a website called Cherry Bronco.com (site was live in 2010, but has been down for years). He made wooden vehicles and furniture as a hobby in his spare time.

In the case of the 1977 Cherry Ford Bronco below, as you can see in the before and after pics, the body was pretty trashed and in need of something new.  The pieces are all 7/8″ to 1″ pieces glued and screwed together.  The bumpers and trim are done in Oak and Ash.  A single coat of linseed Oil and three coats of Marine Varnish protect the finish and the owners clean it with furniture polish.  Surprisingly, the new  wooden body is actually 300lbs lighter than the original metal.

bronco_cherry_wood_prewood

bronco_cherry_wood1

Here’s a 1956 CJ-5

1956_cj5_wood_jeep

1956_cj5_wood_jeep2

wood_jeeps5_hubcap

Here’s a 1966 CJ-5

1966_cj5_wood_jeeps

Here’s a 1969 CJ-5

1969_cj5_wood_jeeps

And a 1977 CJ-5

1977_cj5_wood_jeep

 
To Top

1954 CJ-3B Detroit, Mi $700

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

Here’s some CJ-3B parts.

“Gotta go need room nice orig CJ3B body frame, axles, trans transfer case. New old tires Dual rear wheel. Great for restoration or awesome trail Flattie. Excellent grill Radiator, Windsheild, Hood, Dash, Solid 56 Rear CJ5 tub 1/2.”

http://detroit.craigslist.org/okl/cto/1528036148.html

1954_cj3b_detroit

 
To Top

1947 Wagon Smithfield, RI **SOLD**

• CATEGORIES: Willys Wagons • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5500

This looks good.

“700 OD Trans, 305 engine, sits on 1988 Chevy Blazer frame, Duel Exchaust, 4 wheel drive.”

1947_wagon_smithfield

 
To Top

1956 CJ-3B Mansfield, MA **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $750

“1956 Willys Jeep complete rolling frame with original motor, tranny, etc. Solid driveline. Motor is complete, good radiator, original carter carb. Body tub, fenders and windshield frame have been removed. I do have the hood and grille. Frame is in good shape. Has lockout hubs. Would be a good restore candidate or a great parts machine.”

1956_cj3b_mansfield

 
To Top

1961 CJ-6 Charleston, SC **SOLD**

• CATEGORIES: CJ-6 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500.

“Willys Jeep – original motor – 4 cyc. 4×4 rebuilt brakes and caburator – needs some work but runs good”

1961_cj6_charleston

 
To Top

1948 Truck Project Simi Valley, Ca **SOLD**

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1800.

The body looks good from the pics.  This is a project.

“This truck is is part way through a body off restoration. Their is no rust and only minor body work left to do. The body it primed inside and out with undercoat on the bottom. It comes with a rare Kaiser Fraser flat top L-6 motor. Photos are old and some more work has been done. Will consider a trade for 400cc + sport ATV.”

1948_truck_simivalley

 
To Top

1953 CJ-3B Jerome, ID **SOLD**

• CATEGORIES: CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7500

(09/28/09) This looks like a nice, stock, early CJ-3B.

“This is a 1953 cj3b that has been frame off restored . The engine has 800 miles on it . The engine was gone through top to bottom . It has been painted back to original color. I am the third owner . I have owned the jeep sence 2003 . The seats are in new condition . It has a heater and a defroster that both work very well . The tires have about 1/2 tread and the spare is brand new”

1953_cj3b_jerome

 
To Top

1963 CJ-5 Pembroke, MA **SOLD**

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $450.

(11/12/09) For $450, this looks pretty complete.  The body is fiberglass.

“i have a old 1963 jeep willys cj5 it has a fiberglass tub and fenders it needs alot of work needs engine, gas tank, brake lines, tires,dash, wireing, seats, the windsheild frame is roted. good for a restortation projected the axle are dana 44 rear dana27 front with 538 gears and a t-90 3spd has a good soild frame. i have a engine to go with it that will runs. i have the mass title to go with it. towing availble at xtra $$. thanks for looking.”

1963_cj5_pembroke

 
To Top

Not sure which Parade to watch on New Years?

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Not sure which parade to watch on New Year’s Day?  Then watch the Rose Bowl Parade.  One of our reader’s, Kevin, tells me his daughter Alyson will be waving on float #83 (out of 91 floats) in the Rose Bowl Parade, so look for her and wave back!  She is Ms. Wheelchair California 2009 and Kevin’s a very proud papa, as he should be.  Congrats Alyson, Kevin and the whole family!!

 
To Top

Builds – Gerald’s Brother’s 1 Year Build

• CATEGORIES: Builds, CJ-3A, Features This site contains affiliate links for which I may be compensated.

On New Year’s weekend last year, Gerald and his brother towed home a Craigslist find.  One year later, they are almost done with a great looking budget build.  Gerald tooks some pics and tells the story.  Thanks guys — and I agree with you on those tires.  They look great!

Gerald writes, This started as a Craigslist ad for a 1948 Willys CJ-2A basket case.   He wanted alot more, but after a month of trades and low balls he took the 1000 dollars offer for the lot. Much of the dirty work was done and lots of parts were included.  The jeep finally arrived home over new years weekend, January 2009.

Gerald_Brother1jpg

Gerald_Brother2

Because we didn’t trust any of the work done thus far, our first task was to take it apart the rest of the way.  Once apart, we first focused on fitting the body correctly, which was a 10 + year old MD Juan generic (m-38 / mb) body, along with the stock hood and grill.   We also fabbed up a rear crossmember and hitch.

As we examined some of the running gear parts, we discovered the rear axle was shot (which we replaced from a spare beater jeep out back) and decided to add new 11 inch brakes for the front (from craigslist). The springs were new, so that saved time and money. We tore down the motor, transmission and transfer case to make sure they were in good shape, and then refit them properly to the frame, including fabbing up some motor mounts.

Then, we went to work on the roll cage, which was partially built out of some bar from our old family jeep along with some new tube. After we got everything mocked up, we tore it back apart to get ready for painting.

Gerald_Brother3

Gerald_Brother4

There was stripping and sanding, more stripping and sanding, and then, finally, we sprayed it a deep blue.  We took the time to paint the underside of the body first, along with many of the parts. Then, we assembles the body to the frame and gave it a final coat.

Gerald_Brother5

Gerald_Brother6

Gerald_Brother7

Next came the small stuff such as gauges, wiring, linkages, fuel system, windshield and exhaust.  BTW, I have never seen a head with a fixed rear outlet.  Does anyone know if this could be from a truck?

Gerald_Brother8

One of the most critical steps occurred this week, almost one year from the start date of the project:  The Jeep gets the right set of wheels and tires.  As you could see in the earlier pics, the jeep came with some new tires, but we felt they weren’t right (700 15), so my brother sold them on Craigslist.

Instead, he went with these Interco Super Swamper Radials 265 80 16.  They are mounted on 8 inch wide alum wheels, which was another Craigslist find.  I think these are perfect tires for a Willys in my estimate.  He picked them up today in Wheeling, West Virginia, at National tire.

Gerald_Brother9

Gerald_Brother10

 
To Top

The Swamp Rat

• CATEGORIES: Features, Last Ride This site contains affiliate links for which I may be compensated.

After seeing Chad’s build yesterday, Gerald sent me pics of the ‘Swamp Rat’, which also sports a flathead V8.  Of course, it’s got a bit more wear and tear on it than Chad’s, but i have to say I really like the way that fits in the engine compartment. This sure has an old school feel to it.

Gerald notes, “Check out Johnny’s wood cab and side pipes.  The paint chipped off the windshield, but it used to say RAT.  It’s a star attraction at one of our local yards.”

Swamp_Rat_1

Swamp_Rat_2

Swamp_Rat_3

Swamp_Rat_4

 
To Top

Yamaha Rhino GI Kit **Status Unknown**

• CATEGORIES: Unusual This site contains affiliate links for which I may be compensated.

UPDATE: The website for Tippman is down. I can only assume that these kits did not sell well enough and the company went out of business.

I know what you are thinking … how can I turn my boring Yamaha Rhino into a flat fender looking offroad vehicle?  I’m sure this has kept you up at nights?  Well, you need not lose any more sleep, as Tippman Design has developed exactly the package you need.  It’s like a VEEP for the ATV crowd.

According to the Tippman design website, “the first of our products [is] the GI Kit for the Yamaha Rhino 660 and 450 with the ability to be installed on all Rhinos built prior to 2009. We are working on the fitting of the new 2009 Rhino design. The club car GI Kit is on the drawing board as well, production date to be announced.”

The base price for the package is $2200 plus shipping.

Here’s a standard Yamaha Rhino (Ok, I think this is standard; I don’t really know)

yamaha_rhino

And here’s a Rhino with the Tippman GI Kit installed.

yamaha_rhino_kit

yamaha_rhino_kit3

yamaha_rhino_kit2

yamaha_rhino_kit4

 
To Top

Willys/Jeep Slogans

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

One day as I was going through some old brochures, I started recording some of the slogans.  Here’s just a few of them:

Jeep:  The world’s most useful vehicle
The sun never sets on a jeep
Ten Billion Miles of Proof
Willys puts the F in Farm Power
Keep America on the Move
Do it quicker; do it better with 4wd
A revolutionary vehicle for a thousand jobs
There’s a Jeep vehicle for your toughest job
Willys Builds the Universal Jeep
The Worlds Hardest Workers
The Worlds’ most willing workers
Sign of the times, Willys Jeep Vehicles
You’ll be ‘busy as a bee’ in your new vehicle from Jeep
Two things Willys is known for, Beauty & Stamina (which referred to the Aero and the Jeep)

 
To Top

Kubel_Lite — A VW version of the Kuebelwagon

• CATEGORIES: VEEP (VW Jeep), Scamp, Others This site contains affiliate links for which I may be compensated.

(I meant to publish this yesterday …)

Continuing the VW theme, David Barrett has created a prototype for a VW Kit version of the 4wd Kuebelwagon, which of course was originally developed by Volkswagen.  I think it looks pretty cool.  You can learn more over at the Samba website about David and this project.  http://www.thesamba.com/vw/classifieds/detail.php?id=766513

Here’s an original Kuebelwagon:

VW_Kuebelwagen_1

An here’s some pics of David’s kit project:

kubel_lite1

kubel_lite2

kubel_lite3

kubel_lite4

 
To Top

1953 CJ-3B Austin, TX **SOLD**

• CATEGORIES: CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5000

This CJ-3B started at $8000 this summer and has just dropped to $5000.  It looks like a great price on a very nice, stock looking CJ-3B.

“For sale 1953 Jeep please call for more details.”

 

1953_cj3b_austin3