To Top

1950 CJ-3A Colorado Springs, Co

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

This might be a pretty good deal.  

"This is a 1950 Jeep Willys CJ-3A. For the year, it's in great condition. It comes with a brand new, single barrel carbuerator. Nothing is missing from it, except the PTO I removed off the back. It has a 4 cylinder flathead. The engine turns over, but the new carb hasn't been hooked up yet and there's no battery so it deosn't run. I took this on as a project, but just won't have the time to put into it. It'll make a fun project for someone. Asking $2,750, but I'll consider offers. Email or call me at 303-718-0698."

http://cosprings.craigslist.org/cto/805561281.html 

 
To Top

1962 CJ-3B Portland, Or $6000

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

There's been some mods to this one, more than described by the seller.  Looks like a great trail jeep.

"RARE FIND! Relocation forces sale of Jeep! Original body, new rolling chaise, tires, custom roll cage, 5pt harness seats, 20 gal fuel cell. Custom made cover for outstide storage (has been garaged). Runs great and ready for off roading! More photos available upon request. Seller will entertain all offers and call with any questions. More pictures can be emailed. 503-314-6806"

http://portland.craigslist.org/wsc/cto/809910627.html 

 
To Top

1958 CJ-3A Rathdrum, Id $2500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

The price of this CJ-3A sounds about right.  Some pics of this one would be nice to see.  Obviously, the year isn't quite right, but maybe it's on a later model frame?

"Willy's CJ3A, Stock, V6, Straight Body, Warn Over Drive & Bikini Top. Serious Buyer's Only Please. E-mail for More Info."

http://spokane.craigslist.org/car/777057087.html 

 
To Top

1953 CJ-5 Montana $650

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

This is one of the stranger CJ-5s I've ever seen.  While the cage won't be sold with the jeep, it's not exactly a good advertisement for the kind of custom cage they are offering to make.  You gotta see all the pics to really appreciate this one.

"1953 Willys ready to finish your way or we can custom build to specs. We have various axels, motors, transfer cases, and trannys. Cage inside and rims do not go with rig. We can also custom build bumpers, tire carriers, cages, sliders to your original design. Or take it as it sits and restore. Tubs is in great shape no major rust. make offer. 406-887-2858"

http://montana.craigslist.org/cto/812578816.html 

 
To Top

MB & M-38 Parts McCall, Idaho

• CATEGORIES: GPW (Ford MB), M-38, MB This site contains affiliate links for which I may be compensated.

Here's a few MB parts:

Front & Rear Differentials DANA 25
Transmission & Transfer Case T18 (military versions)
All for $100 (all good for parts only)

M-38:

Rare fording kit for M38 – Never installed –
$225 Call for details: (208) 741-9304 

http://boise.craigslist.org/pts/808629316.html 

 
To Top

1952 m-38 Melba, Idaho $9000

• CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.

I don't see anything that shouldn't be there.  Looks in great shape.

"1952 Willys M38 Army Jeep. Korean War jeep, completely restored original. New motor, tranny, Koker tires, brakes, soft top with doors. New paint, looks and runs great. 50 miles on new motor. Call Dan at 989-6333."

http://boise.craigslist.org/cto/810706424.html 

 
To Top

Old School Baja Fiberglass Seats Spokane, Wa $30 obo

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

I haven't seen these type of seats in years.

"Baja fiberglass bucket seats with covers(covers are worn as you can see from pictures).Come with brackets that are adjustable.Came out of a CJ Jeep.$30obo.email or call 939-4910.Thanks."

http://spokane.craigslist.org/pts/803854687.html 

 
To Top

1964 CJ-3B Scotts Valley, Ca $3000

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

I love Scotts Valley .. I worked out of the old Borland Building for 3 years.  There are few better places in the US to work than the old Borland Building (now the Enterprise Technology Center).  As for the jeep, it's priced a bit high for a non-running CJ with significant rust.

"All original 1964 Willys CJ-3B (original matching serial number engine and chassis with number plate. Original body color was Spruce Green, now is painted a light blue color. Runs fine, but smokes a little (engine should be rebuilt eventually). Needs some minor work to get running again (battery recharged, gas lines and gas tank drained). Hood looks like it has been replaced at some point. Aftermarket heater installed in front passenger side. Rear bench seat is missing. CD ignition system installed."

http://sfbay.craigslist.org/scz/cto/806864236.html 

 
To Top

R10H-1 Overdrive Portland, Or $85

• CATEGORIES: OD Borg Warner/Rancho This site contains affiliate links for which I may be compensated.

I’m not positive, but I believe this version of the Borg Warner Overdrive can be used by a variety of 50’s and 60’s vehicles including jeeps with the dana 18 transfercase.  Here’s an article that explores the overdrive issue on older jeeps.

“R10H-1 overdrive, Warner Gear Div., believe out of 50’s chevy? Good condition! $85 or trade for willys, cj parts.”

http://portland.craigslist.org/wsc/pts/846290149.html

 
To Top

1948 CJ-2A Sonoma, Ca $1600

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

Get out your welder.  This might be a decent deal depending on how good the condition of the body is.

"Runs. 1000 miles on rebuilt engine. 12 volt system. Recent frame crack requires more skill than I have. Great project car. Call Matt for more information (cell) 707-290-1611"

http://sfbay.craigslist.org/nby/cto/803916703.html 

 
To Top

1950 CJ-3A Crystal, Mn eBay

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

This fiberglass tub flatfender looks pretty good.

“You are looking at a 1950 Willys Jeep. It has a 231 cubic inch Buick V6 which is a quite common conversion since it was used in 60’s vintage Jeeps. It has power steering, a rebuilt M18 Transfer case, rebuilt Dana 25 front differential with new Lockrite locker, rebuilt Dana 44 rear differential with new Lockrite locker, new king pin bearings, new front wheel bearings, new pinion bearing, total of $2,500 work done. Less than 100 miles since work was done. Has exceptionally sturdy fiberglass tub. Original steel hood and windshield. Larger gas tank relocated to rear. New 31″ tires. New rebuilt Holly carb, the leaf springs are new and are longer than stock for a better ride and more articulation.”

 
To Top

My Build — Creating the Hood

• CATEGORIES: Biscuit, Features This site contains affiliate links for which I may be compensated.

I've decided to tackle the hood.  Because of the 4.5" extension to the front clip, I've had to decide what to do with the hood.  As I documented in previous posts, I've lengthened the fenders.  Now, instead of trying to lengthen an existing hood, I've decided to create my own fiberglass hood:  Nothing fancy, just a straightforward simple hood.  I'll save a more complex hood for a second form.

Since I had an existing hood that had a good hinge and a good rib, I decided to remove those from the hood and use them on the fiberglass hood.  To do this, I had to drill out the rivets that attached the rib to the hood.  Once drilled out, the rib came right off.  You can see the rib and the hinge below.

Continue reading

 
To Top

James’ newest find …

• CATEGORIES: CJ-2A, Features This site contains affiliate links for which I may be compensated.

James found this cj-2a with a m38 body on Craigslist for $2,000.  He pounced on it immediately.  I'm not sure how I missed it during my searches!  Just goes to show I can't find them all.

This is an excellent find, especially since the body is in excellent condition reports James.  It's also one of the best California deals I've seen … 

 
To Top

1963 CJ-3B Woodland Park, Co $2200

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

I think this is a good price.  It looks like it has a warn winch, good tires and a good top.  With the overdrive, you've got $1000 worth of value right there.

"1963 Willys CJ3B jeep V8 with overdrive 31 inch mud tires. Lots of extras. Call Andy 432-7869."

http://cosprings.craigslist.org/cto/802006118.html 

 
To Top

1942 GPW Susanville, Ca $2400

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

Update:  Price dropped slightly to $2400

I suspect the body on this jeep isn't worth restoring, but it still a running gpw for a reasonable price.

"Must sell, I have a 1942 willys jeep with 16,000 miles on it. I cant confirm the milage as it has a new speedomiter that I havent hooked up, have cable havent done it. It is a 1942 GPW, with the original Go-Devil engine, does not use oil and runs great. New tires, brakes are good (for this old of a jeep), it is an original flat fender the tub has been glassed. The body is very straight and the last paint job it got is marginal. I do not have the time or money to restor it as I had planned. I have driven it around locally since I bought it a year and a half ago and never had any problems at all. I really hate to sell this jeep but have to, my loss is your gain. You may call me at 530-569-0524, I will consider a trade for a jeep Cherokee in good condition."

http://sacramento.craigslist.org/cto/801717370.html 

 
To Top

1946 VEC CJ-2A New Jersey $1000

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

Here’s an early CJ-2A with the column shift. The seller doesn’t not indicate whether it runs or not, but it looks whole — it looks like it might run.  Obviously, the hood and windshield are a bit rough.

“For sale is a 1946 Willys with early column shift.”

 
To Top

1954 CJ-3B Tacoma, Wa $6500

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: This was for sale for the same price in July, but the jeep was brown (as you can see in the pic on the right). Now the jeep is gray as seen in the left.

Given that the body is a fiberglass, which is very hard to find for CJ-3Bs (actually impossible is a better word), I'm positive this was produced in the 80s or early 90s.  Looks to be in great shape.

"This 1954 3-B Highhood powered by a Chev 383 stroker V-8 and 4-Speed transmission.  warn 12,000 lb winch.  36×14.50×16.5 swampers. dana 44 front axle. dana 18 transfercase.  Fiberglass Body …."

http://seattle.craigslist.org/tac/cto/802615382.html 

 
To Top

1942 MB Naches, Wa **SOLD**

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was 4950.

“My friend is selling his 1942 Wily’s Jeep. it has a 6 cylinder over head valve Hurricane engine. All suspention springs have been redone. Rides nice! newer radiator. tune up, carb rebuild. good tires, licensed. clear title. Runs Great! No rust! This is a turn key jeep with Lots of power. I can send you pictures of anything you like to see on it. Very cool Jeep. hinden head lights from the military. 12 volt system. Not stock, just improved. turn key starter. nice bucket seats. the price is obo, a bit anyway.”

 
To Top

1946 CJ-2A Rigby, ID **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $9500.

“1946 CJ2A: Frame off restoration with 4200 miles. New 1967 Buick 225 V-6/300 hp. Boxed in frame for winch support. Titanium alloy “Rock Crusher” rims. Gas filled guages. Custom built 15 gallon fuel tank under back seat. Jeep Wrangler seats. All original and completely rebuilt runnung gear. Best top and doors. Original and rebuilt Willys heater that will keep you warm. Warn overdrive and hubs. Custom top mounted pedals. Chevrolet steering box and tilt wheel from 1967 Camero. Much more info upon request. $9500.00 or close to it.”

 
To Top

Stainless Steel on Suzuki Chassis **SOLD**

• CATEGORIES: Other 4x4s, stainless/jewels, Unusual This site contains affiliate links for which I may be compensated.

UPDATE: Was on eBay.

“JEWELS SEMI STAINLESS WILLYS.  JEEP IS SET ON 1987 SUZUKI CHASSIS HAS 4 CYL MOTOR, 5 SPEED TRANI, AND IS FOUR WHEEL DRIVE.EVERY THING WORKS AND MOTOR RUNS VERY GOOD. BODY HAS STAINLESS TAILGATE (VERY RARE),STAINLESS ROLL BAR,TIRE CARRIER. TOP IS IN VERY GOOD CONDITION ALSO HAS SIDE DOORS. HAS SPRAY IN LINER INSIDE OF TUB.ODOMETER READS 883 MILES I DO NOT KNOW IF THIS IS CORRECT OR NOT BUT BY THE CONDITION I WOULD SAY ITS GOTTA BE FAIRLY CLOSE.”

 
To Top

1956 CJ-6 Fort Worth, TX **SOLD**

• CATEGORIES: CJ-6 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $6950.

1956 is the second year of production, where 2500 were made. During the first year, only 581 were produced. So, this is a pretty early model. Looks in good shape.  These don’t come for sale very often.

“Straight-no rust * Runs Great *134 CI 4-cyl * All new Painless Wiring *New Gauges *New Tires *New Shocks *New Battery *Clean Royal Craftsman Removable Top and Doors **In the city or in the country-its a blast to drive”

 
To Top

1953 CJ-3B **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

(SEE COMMENTS)  It appears a great deal of meticulous work has gone into this ‘restoration’ and it looks nice.  However, this doesn’t make a whole lot of sense to me.  If you are trying to make jeep that’s just come off the battlefield of WWII and you are going to invest the time and energy, why not do this with an earlier model such as an MB (that really did come off the battlefield) or it’s closest cousin the CJ-2A?

“98K original miles, 6 volt, all stock and original, new engine (it purrs) with maybe 5K on it, rebuilt transmission, rebuilt brakes, fresh upholstery on the original seats, a few dents and dings. Its turn key, needs nothing, starts, runs and drives excellent for a near 60 year old Jeep. Built to look like it just rolled off the battlefield in WWII, extended bed, Flat military green paint,loaded with ammo boxes, vintage tools, military surplus stuff, canvas etc.”

**SOLD*

 
To Top

1947 CJ-2A Nashville, TN **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4000.

“jeep has a newly rebuilt motor and i have hardly driven it. it has a spare gas can and a tow bar on the front. the body is in fair shape. this would be a great project jeep. cashiers check or cash only please.”

 
To Top

My Rebuild — The Windshield

• CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.

The first time I tried to fit the windshield onto the body last year, it was too narrow to fit correctly.  At that point, I put it aside to deal with later. 

Well, yesterday I decided that now was 'later'.   After playing around with the windshield some, I realized a couple things:  1) Someone had welded a crack on the driver's side leg, so I had to grind that down a bit to help it fit; 2) The cowl of the fiberglass body was not shaped quite right, so I would have to 'trim' some of the rubber gasket to get the window to fit (the rubber needs replacing anyway, so I hacked it for test purposes — as can be seen in the closeup photo below); 3) Even with the rubber hacked, the windshield likely won't fit as tight as I'd like, but I can live without a tight seal as I doubt I'd be driving in much rain anyway.  

With those decisions/concessions made, I had to choose where to drill the holes for the windshield mounts.  The key for me was to get the right tilt to the windshield angle, making sure the horizontal part of the legs looked pretty level and making sure that when the windshield was tipped forward that it would rest level (something that I couldn't do after mounting the windshield to my first jeep).  Finally, I had to make sure the windshield was back on the cowl far enough so that the windshield frame binders could be mounted to work correctly (I'm calling them binders here, but what do you call the two devices that pull down and secure the windshield?). 

Another task I tackled today was the brake pedal.  I took a brake pedal assembly out of a junk yard '90 cherokee.  Originally, I had the pedals all set up for a clutch and brake pedal.  After getting that setup complete, I changed my mind to go with an automatic. With that decision, I chose to get a wider automatic brake pedal.  Fortunately, the cherokee's also came with automatics (and hence automatic brake pedals) and they used the same brake/clutch assembly system, so all I had to get was a brake pedal and resize it.  So, if I do decide to switch to a stick/clutch, changing out the brake pedals and adding the hydraulic clutch mechanism (which I already have) will be a snap.

 
To Top

1953 CJ-3B Newport, Wa **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1750.   I think this is a good deal.

This ad caught my interest because I’d never heard of Newport, Washington.  Newport is located north of Spokane and west of Sand Point, Idaho.  Looks like a beautiful place.

The jeep is interesting too.  The drive train has been modernized and the jeep outfitted with a modern cage. The engine probably has some extra spunk for a v-6, but bored 60 over suggests that it might not have a ton of life left.

“1953, Complete running gear out of 1968 Jeepster Commando, 3:73 gears, model 27 up front has a 44 in the back, model 18 transfer case,turbo 400 with shift kit, 225 V6 punched over 40 headers and turbo mufflers, aluminum high rise with 4 barrel carb, saginaw power steering, 2 inch lift kit, we have a few spare parts that go with it. Hasn’t been started in three or for years. missing coil and ballast resister. Has a nice full cage. Front and rear seats out of CJ-7”