Bobcat Research Archives

To Top

1947 CJ-2A Whidbey Island, WA $8,500

• CATEGORIES: CJ-2A • TAGS: , , , , This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $8500.

1947-cj2a-whidbeyisland-wa42This hood has some unusual vents. It’s a good looking jeep. It looks like it has a bobcat fiberglass body as well.

“Built jeep. I’ll start from the bottom
33” Super swampers
Disc brakes front/rear
Dana 44 Full floating axles, detroit lockers front/rear
Spicer 18 twin stick transfer case. custom modded
Turbo 350 transmission with shift kit
Built 327 with Holley throttle body injection
Brand new Yellow top battery
Complete FIBERGLASS body
Warn winch
custom dash
pro car seats
Collector plates (never buy tabs again)
Lots more, too much little stuff to list.
All top shelf parts with low low use.
Always kept in my garage and never taken out in the rain
Also have a soft top (which has seen better days)

The only reason I am selling is because I have two small girls and it is not practical as a “family” wheeler. So please no trades or low ball offers. You won’t find a cooler or better built willy’s around.”

http://seattle.craigslist.org/see/cto/4947811239.html

1947-cj2a-whidbeyisland-wa41 1947-cj2a-whidbeyisland-wa43 1947-cj2a-whidbeyisland-wa44 1947-cj2a-whidbeyisland-wa5 1947-cj2a-whidbeyisland-wa6

 
To Top

Bobcat Fiberglass Body and other parts

• CATEGORIES: Parts • TAGS: , This site contains affiliate links for which I may be compensated.

The body has a metal dash added to it.

“Fiberglass tub with metal dash, metal fenders, hood, grill, windshield frame, all in good shape, also a set of tires and wheels that are good for rollers.”

http://portland.craigslist.org/clc/pts/4910730481.html

parts-portland-or1 parts-portland-or2

 
To Top

1946 CJ-2A Auburn, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE **SOLD** Was $4000.

(02/23/2014) This has a Bobcat fiberglass hood (and a right broken axle).

“CJ2A Flat Fender, 302ci ford, rat 3 speed transmission, warn overdrive, warn winch, dual tanks, tilt telescoping steering wheel, boxed frame, front disc brakes, 11 inch rear drums, Dana 44 Front and Rear, Posi Front and Rear, 5.38 Gears, Warn Full floating rear axles (hubs all 4 wheels), Wrangler Springs Lots of Flex and Travel, 15/35-15LT Super Swampers 95% Tread, Has Broken Right Front Axle, Has been in storage for over 5 years. $4000 or Trade up or down. Rat Rod, Jetski, Seadoo, Muscle Car, Unusual car?…”

1946-cj2a-auburn-ca-41 1946-cj2a-auburn-ca-42 1946-cj2a-auburn-ca-43 1946-cj2a-auburn-ca-44

 
To Top

Bobcat Fiberglass Hood Harbor City, CA **SOLD**

• CATEGORIES: Parts • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Was $185. **SOLD**

Looks in good shape.

“1950/52 Willy’s flat fender jeep hood.
Raised design for air filter clearance. Silver color. Fiberglass. Front latches not included. Hood ONLY.”

bobcat-fiberglass-hood-ca

 
To Top

1954 CJ-3B Selah, WA **SOLD*

• CATEGORIES: CJ-3B • TAGS: , , , This site contains affiliate links for which I may be compensated.

UPDATE: Was $8000. **SOLD**

Good looking CJ-3B that sounds well-built for the roads and trails of the Northwest. I don’t know much about the motor though.

Selling my 1954 Willys High Hood. Just don’t have room for it any more. 
1954 High Hood Willys Jeep
Color: Brown
4 Speed Manual Transmission w/ Warn Overdrive
Life time License Plate-( no tabs needed annually based on age)
273 Cubic inch Dodge V8 Motor w/ Mild RV Cam, Stock Truck Intake and exhaust manifold, and 2 barrel Carb with new gaskets and float. 
New Water Pump and Hoses
Newer 1 piece Dutchman Rear Axles, Ring and Pinion, and LOCK-Rite Locker
Warn Over Drive
5:38 Gears
Oversized 9″ Brakes
Newer Warn Hubs front
8500 # Warn Up Right Winch w/Hand Held Controls
New Soft Top /Black with clear windows
6 point Roll Bar
Spare Tire Carrier and Rack
High Lift Jack
32″x 11.5″ Super Swamper TSL Tires with matching spare”

1954-cj3b-selah-wa1 1954-cj3b-selah-wa2 1954-cj3b-selah-wa3 1954-cj3b-selah-wa4

 

 
To Top

1948 CJ-3B Body Ashland, OR **SOLD**

• CATEGORIES: CJ-2A, CJ-3B • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: Was $400. Status Unknown. Pics now available of the very rare Parkette 3B shell and a Bobcat 3B hood. 

(10/16/2013) I tried to get some pics of the 3B body, but didn’t have any luck. That sounds like the most interesting part.

“Rolling frame, running gear and roll cage included. No motor or transmission. Comes with Willies high hood full fiber glass wraparound body. $400”

1948-cj2a-chassis-cj3b-body-ashland-or

parkette-3b-shell-ashland2 parkette-3b-shell-ashland3 parkette-3b-shell-ashland4

 
To Top

Bobcat Fiberglass Hood Bremerton, WA $25

• CATEGORIES: Parts • TAGS: , This site contains affiliate links for which I may be compensated.

A bit rough, but a great price.

Fiberglass hood from a Willy’s Jeep.
Please call, I don’t respond to text or email.”

http://seattle.craigslist.org/kit/pts/4454177847.html

year-bobcat-hood.jpg

 
To Top

Fiberglass Body (Bobcat?) Grays Harbor, WA $500

• CATEGORIES: Body Parts • TAGS: , This site contains affiliate links for which I may be compensated.

Could be a Bobcat body.

“Has title. Heavy duty body. You haul”

http://seattle.craigslist.org/oly/pts/4446413023.html

year-bobcat-graysharbor-wa

 
To Top

1945? Fiberglass Flattie Las Vegas, NV **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3500.

(03/17/2014) Given the name on the tailgate it is clear this is a Fiberglass Bobcat body. If you look at the first pic you can see the windshield frame sitting on the cowl with only part of the rubber. This builder discovered what I and other discovered. The cowl wasn’t formed quite right to fit the windshield correctly. So, this builder decided only to protect the driver from rain.

“FOR SALE IS A 1945 WILLYS JEEP WITH FIBER GLASS TUB NEVER WORRY REPAIRING RUSTED METAL NEEDS BRAKES, BATTERY RUN LAST YEAR”

1945-flattie-bobcat-fiberglass-lv-nv1 1945-flattie-bobcat-fiberglass-lv-nv2 1945-flattie-bobcat-fiberglass-lv-nv3

 
To Top

Fiberglass Body Oregon City, OR **SOLD**

• CATEGORIES: Body Parts • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was listed at $650.

(12/19/2013) I haven’t run across a fiberglass body like this with steel reinforcements.

“Willy’s Flatfender body with fenders and hood.Steel reenforced for rollbar and seats.Not a light weight tub for racing”

fiberglass-body-oregoncity-or

 
To Top

Fiberglass Bobcat Hood North Bend, WA $200

• CATEGORIES: Parts • TAGS: , This site contains affiliate links for which I may be compensated.

This looks in good shape.

“Perfect shape no cracks on glass ready to mount. These are very expensive and so is shipping.”

http://seattle.craigslist.org/est/pts/4322448871.html

bobcat-hood-northbend

 
To Top

1942 Flattie Robstown, TX $4000

• CATEGORIES: CJ-2A, CJ-3A, MB • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $4000

(10/29/2013) This modified flattie has a Bobcat fiberglass body. I don’t see too many with the branded tailgate.

“street legal but scary ride lots of power for small jeep, high performance chevy 350,fiberglass body, full soft top, disc brakes, 410 gear ratio, granny gear four speed, lifted, on board air compressor, fully customized, not another one like it, ultimate mud and sand machine bumper built for winch rack for stereo and speakers great for hunting, muds runs or beach trips serious calls only please. 4000 obo three six one 4433032 call email or text. i work strange hours but will get back to you if i dont answer.”

http://corpuschristi.craigslist.org/cto/4270489072.html

1942-flattie-robstown-tx1 1942-flattie-robstown-tx2

 

 
To Top

Fiberglass Flattie Tub Jacksonville, FL **SOLD**

• CATEGORIES: Body Parts • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Was $400. **SOLD**

It could be a bobcat body.

“Fiberglass tub with hood and fenders.”

fiberglass-tub-jacksonville-fl

 
To Top

1947 CJ-2A Bellingham, WA**Status Unknown**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Status Unknown. Was $1450.

This has some good updates. Might make a great project. “1947 Willys Jeep CJ2A Flat Fender 225 Buick V6 Posi traction Raised uspension Tru Trac tires on spoked rims (lots of tread) Locking hubs Roll bar Swing peddles 11″ brakes Saginaw steering Jeep as been parked for the last 13 years, ran when parked but will need some work to go back on the road. Clutch system, master cylinder, ignition. Great project with most the hard work done! $1450.00 OBO”

1947-cj2a-bellingham-wa02 1947-cj2a-bellingham-wa03 1947-cj2a-bellingham-wa04

 
To Top

Rapid Transit Lives . . .

• CATEGORIES: Features, Racing • TAGS: , , This site contains affiliate links for which I may be compensated.

Damian wrote to tell me that a favorite drag jeep of mine, Rapid Transit, is racing under a new owner and a new power train. It looks like it uses a Bobcat hood and (likely) body.

He writes, “believe it or not this jeep is still around in the cleves, ohio area and races regularly, but it is now a center seater 2wd and has a small block chevy, i race with the current owner and also do photography.”

You can view Damian’s photos on Facebook. Below is a comparison between the old and new racer.

Vintage Rapid Transit (from the 80s?):

After (one of Damian’s photos):

rapid-transit-drag-jeep-new-look

 
To Top

Fiberglass Flattie Sisters Lakes, MI **SOLD**

• CATEGORIES: Features, Racing • TAGS: , , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500.

This custom fiberglass flattie has been stretched in the front, among other mods. The grill style looks pretty different, but no good pics of it.

“Jeep mud sand. Lots of extra parts axels transmission clutch”

fiberglass-flattie-sand-jeep0 fiberglass-flattie-sand-jeep1 fiberglass-flattie-sand-jeep2 fiberglass-flattie-sand-jeep4

 
To Top

1949 CJ-2A Nevada? $5700

• CATEGORIES: CJ-2A • TAGS: , , This site contains affiliate links for which I may be compensated.

This good looking jeep likely has a Bobcat body. The license plates suggest the jeep is in Nevada, but the VIN/ID plate is from Washington. I’m surprised this only has a Dana 41 rear. Is that a thin air cleaner between two steal plates.

“This is in Excellent conditions. Fun for going off-Road up to the Mountain. This has a Dana 41 rear, with 44 rebuilt rear ready to go in. Dana 25 front. 11″ brakes. 2 1/2″ lift. Custom nerf bars. 8000LB. Winch. Seats extended 8″ in to the wheel wells for leg room. 8000LB Winch. Tilt Steering Wheel. Power steering. Opt roll cage. New aluminum wheels. Tow Bar comes off easy. High back seats. Dual exhaust. Upgraded heater. Bikini-Top. Air-Lock emergency brake. EXTRA: Dana 44 rear end is rebuilt and ready to install. Fiberglass high hood painted to match. Fun option to change the look. Priced to sell fast. Check this one out. Remember You Pay NO Sales Tax! Call me for more information. (key # A10)”

http://www.privatepartycars.com/search.fx?id=80859

1949-cj3a-nevada1

1949-cj3a-nevada2

1949-cj3a-nevada3

1949-cj3a-nevada4

 
To Top

1944 MB Maple Falls, Wa **SOLD**

• CATEGORIES: MB • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $2688

(03/20/2013) This looks like a nice little jeeping jeep.  The seller notes that this jeep saw action in Guam. It has a Bobcat fiberglass hood

“Yes, iam selling my baby,economic challanging times force me to offer some lucky person a rare custom 1944 WW2 Willys MB-38 Jeep. Its NOT stock cause its got a chev V8 350 raised engine hood,(but could be made stock except the low throaty purr of a V8 engine.)

Here are just SOME of its features…

– 33 inch Micky Thompson mags and almost new wild country tires.
– 6 point roll bar kit inc, not all installed yet.
– Bosh,H4 high low, bright headlights.
– Heavyduty tow bar to tow behind your motrhome or truck.
– Fairly new in great shape Best Top, and half Bikini top for summer.
– AM/FM radio
– Aluminum diamond renforced plating,
– Spare tire holder and spare,with metal gas can holder and Jerry 5 gallon metal tank.
– Two barrel Carb,Custom air filter,Small block V8, runs perfect and is in excellent shape.
– Custom stainless steel muffler.
– New stock drum brake pads front and back.with new resivor installed.
– Rebuilt less then 500 miles ,3 speed manual tranny, Four wheel drive works great!(this thing can clinb the hills)
– Comfortable bucket seats with seat belts for two.
– New front windshield glass, no chips or pits.(can be folded down on the hood for wind in your face driving)
– Black out run lights,hidden compartments Shovel and axe mounted on sides.
– This was a actual WW2 jeep , and saw sevice in Guam.

This jeep is ready to go hunting,pulling behind your rig for camping,four wheel driving,except for needing u-joints i trust it completly on or off road, when you drive this JEEP people notice…
I work 6 days a week, so only serious buyers please ,I will show by Appointment only on Sundays and live in Maple falls,WA.”

1944-mb-m38-bellingham-wa

 
To Top

1952 M-38 Yuma, AZ **SOLD**

• CATEGORIES: M-38 • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $6500

“***Beautifully Restored and Modified*** This ‘attention getter’ is ready to go to a new home. Everything works and is in pristine condition. Rebuilt Buick V6 Engine has about 600 miles. This is a 3 Speed T90 with a hydraulic clutch and Atlas Transfer Case. Jeep has Dana 44’s front and back and has new electrical wiring throughout. Jeep was like this when I bought it except for minor modifications to make it look and run better. It also comes with the complete vinyl top. Not in a hurry to sell, so no low balling and not looking for trades, only serious inquiries. I can answer any other questions you might have. Sorry cash only.”

1952-m38-yuma-az00 1952-m38-yuma-az0 1952-m38-yuma-az1 1952-m38-yuma-az3 1952-m38-yuma-az4 1952-m38-yuma-az5 1952-m38-yuma-az6

 
To Top

1946 CJ-2A Renton, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3200

This is a project with a fiberglass bobcat hood.

“I have a 46 willys jeep for sale. With a good running chevy 305 and a Muncie 4 speed tranny with hurst shifter. I recently striped the body and gave it a nice coat of epoxy primer. Jeep has a 6 point roll cage willys hood and an after market fiberglass hood (both are Primered). The windshield is the only piece that isnt primered and it need a new glass. Jeep also has 14X33″ boggers. Jeep has fiberglass bucket seats with covers. Front axle needs a little work but other than that this is a mean off roading machine. Just dont have the time to make it what I want. 3200 OBO”

1946-cj2a-renton-wa-project

 
To Top

Bobcat? Fiberglass Body Bend, OR **SOLD**

• CATEGORIES: Body Parts • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was  Make Offer

(04/03/2013) This looks like an original Bobcat body.

“New body, gate.. Grill..fenders..tailgate..
In like new condition never cut on…
Over 2 grand retail, not tryin to that im open to offers
Guns..quads.. Jetskis..cars..trucks..motorcycles..ect”

Fiberglass-body-bobcat-bend-or

 
To Top

1957 Flattie Akron, OH $1000

• CATEGORIES: CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $1000.

(04/09/2013) There can’t be too many Parkette bodied jeeps with a Bobcat hood in Ohio. The cage appears to go down to the frame. It looks identical to the roll cage in the first picture in this post.

“FOUND THIS IN A BARN IN THE HILLS OF SOUTHERN OHIO .IT’S FRESH OFF THE FARM. RUNS, SMALL BLOCK 8 CYLINDER FORD 266 ENGINE, EXHAUST HAS BEEN
REMOVED AND A NEW SET OF SUMMIT RACING HEADERS INSTALLED
BODY IS NOT RUSTY BECAUSE IT IS FIBERGLASS. MISSING DRIVERS SIDE FENDER
(SEE PICS)HAS ONLY BEEN STARTED AND RUN ON EXTERNAL GAS TANK SO
AS TO NOT FOUL UP THE ENGINE. HAS AN ASSORTMENT OF WHEELS FOUR ON IT
AND THREE ADDITIONAL WHEEL AND TIRES ARE ORIGINAL.
GOOD GLASS WINDSHIELD HAS BEEN REMOVED BUT IT GOES WITH IT. VALID OHIO TITLE IN HAND. SERIAL BEGINS WITH 453 ENDS IN 019…best guess is CJ3b . no instruments on dash, title does read 161,032.. not bad for 56 years old.needs steering gear fixed to drive has power steering.
email or text Roger three three zero 9 zero three 44-seventy four…
BRING YOUR FLAT BED AND OWN IT TODAY…. First $1000 takes it .I have had it listed for $1950 but found one to restore to military spec so this one has to go… call, text or email only if your ready to buy.. I’ve heard from enough tire kickers with no cash. You can be mudding next weekend”

http://akroncanton.craigslist.org/cto/3730593442.html

1957-flattie-parkette-akron-oh2 1957-flattie-parkette-akron-oh3 1957-flattie-parkette-akron-oh4

1957-flattie-parkette-akron-oh1

1957-flattie-parkette-akron-oh5

 
To Top

Vintage Racing Photos

• CATEGORIES: Builds, Features, Reader Stories • TAGS: , , This site contains affiliate links for which I may be compensated.

Ed Bray and his parents raced jeeps for years throughout the West. They built two Fiberglass Bobcat bodied race jeeps. In fact the family was friends with both Paul Parker (Parkette Fiberglass Body manufacturer) and Fred Weis (Bobcat Fiberglass body Manufacturer).

Their first jeep with a bobcat body was built on a military frame and powered by a 327 with 365 HP.  Below is Ed’s mother at the start of a race in Calgary where she won an obstacle race. A year ago Ed spotted this jeep, still powered by the same motor (he recognized the sound), driving in Spanaway, Washington.

My beautiful pictureThe next jeep the family built in 1976 started with a factory ordered CJ-7 frame. They stretched a Bobcat body 13″ and installed a Chevy 350/350 LT1 motor set back 8″ with a B&M Turbo 400 w/reverse manual shifter. They added a Wagoner 44 in the rear and a Scout 44 in the front. They raced the jeep in SCORE events, ran the Mint 400 four times, and tried the BAJA 500 in 1980, but DNF’d.  The first picture below is from Riverside and the second from the Mint 400.

riversite-flattie-ed-bray mint-400-flattie-ed-brayEd’s father Don died in 2001. Ed has been refurbishing the family CJ-3A that started it all.

gray-blue-cj3a-ed

 
To Top

1946 CJ-2A Pittsburg, NH **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500.

It’s a project. That could be a Bobcat Fiberglass body.

“This is a 1946 Willy’s CJ2-A. frame is solid has been re-enforced. Fiberglass tub and fenders. Medal hood and grille. Have a truck load of parts that go with this jeep. Started as a project three years ago and haven’t touched it in a while. Motor ran good when I started working on it. Has a ton of new parts. All new brakes, lines master and wheel cylinders. Many many parts go with this jeep including two engine blocks cranks and two spare transmissions. It has chrome wheels and radial tires. Also have all four original jeep wheels in great shape. Asking $1,500 for EVERYTHING come take it all. Lot more invested.”

1946-cj2a-bobcat-pittsburg-nh1 1946-cj2a-bobcat-pittsburg-nh2 1946-cj2a-bobcat-pittsburg-nh3

 
To Top

1946 CJ-2A Jackson Hole, WY **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7000

This has a fiberglass Bobcat hood.

“I’ve had this jeep for over 20 years and have done many improvements to it including; removing and repairing body tub,exchanging lhead engine to f head with more horsepower,rebuilt transmission and transfercase,install saginaw steering, new paint, new seats,rollbar,new tires, stereo,custom hood ,new wiring ,new top, new exhaust”

1946-cj2a-jacksonhole-wy