UPDATE: **SOLD** Was $4250.
(10/28/2019) Has a Bobcat body and hood. Has custom suspension. May have been a racer.
“1951 Willys , fiberglass , 289 Ford engine. Too much extras to list., Runs but needs tuning. $4,250”
UPDATE: **SOLD** Was $4250.
(10/28/2019) Has a Bobcat body and hood. Has custom suspension. May have been a racer.
“1951 Willys , fiberglass , 289 Ford engine. Too much extras to list., Runs but needs tuning. $4,250”
UPDATE: Price dropped to $4000.
(11/24/2018) Has a fiberglass low-hood body.
https://batonrouge.craigslist.org/cto/d/prairieville-1964-jeep-cj3b/6839052801.html
“1964 JEEP CJ3B 4×4 WITH FIBERGLASS BODY. Street legal. Has full enclosure. 1960’s Buick Endeavor v-6
three speed manual. Has high and low range, locking hubs”
UPDATE: Still Available.
https://newjersey.craigslist.org/cto/d/1948-willys-cj2a/6830088003.html
(12/20/2015) “original motor and trans,runs good. 12v converted. updated radiator otherwise original.new tires,water pump, fully restored chasis. needs shocks. updated rollbar with 4 shoulder belts(2000). fiberglass tub, everything else original steel.”
UPDATE: Price dropped to $6999.
(01/24/2019) Seems to be a project. It has a fiberglass body.
https://denver.craigslist.org/cto/d/ridgway-jeep-willys/6807162743.html
“New military fiber glass body. Rebuilt 4cyl motor. New carb. New paint. Lots of extra parts. Good radiator. 2 sets of tires 16 inch rim. Spare frame and axels.”
UPDATE: **SOLD** Was $7000
(04/15/2018) Lots of updates to this Bobcat-bodied Flattie.
“1946 Willy’s/ Bobcat body, brand new 4×4 after market frame built from ground up.
1 ton ford transmission(100 miles rebuilt), married transfer case( 100 miles rebuilt), 383 stroker motor (900 miles rebuilt, can, hardened rods, summit racing pistons), Dana 60 axils front and back, four wheel posi, New super swamped 39.5 tires, 15k wench front mounted custom tow bar, Bucket seats ( frame mounted with 5 point harnesses, custom alluminum gas tank, rear seat original. Great for someone who likes quality built performance.”
The 3B (hard to tell if it is a 3B) has a fiberglass 3A tub.
https://www.facebook.com/marketplace/item/290336601626440
“2 Willys Jeeps for sale. This is a project that I would love to finish, but I’m moving and the cost to move them would be more than they are worth. The Jeeps are a CJ-2A and CJ 3B I believe as far as the motor transmission and transfer case go. I have a frame in good condition with title. My plan was to take parts from both of these to make one Jeep. The black one ran and drove when I got it, but the fuel pump dumped fuel all over the place. The fuel pump and starter were removed for repair and never put back on. The green one started, but would only run for a few seconds before shutting off. Both jeeps will need to be towed. I prefer to sell them together and with the frame.”
UPDATE: **SOLD** Was $6800.
(01/02/2018) “Willy’s fiberglass body , 383 stroker, powerglide 2 speed tranny , 9 in rear , 456 full spool spline ,
Msd electronics , launch controller, 2 step modulator to retard timing for nitrous, has no nitrous but is built for a 150 hp shot , never ran nitrous all motor so far it is fast enough without it . 4.62 sec at dome valley raceway.”
UPDATE: **SOLD** Was $4250.
This is a project. It has a fiberglass tub.
“1948 cj2a Willy’s Jeep project almost complete: new wiring (almost finished), fiber glass tub, fenders, hood all have been painted with Bed liner(quality stuff not junk), new brakes, motor was rebuilt by previous owner and runs, rebuilt trans, flywheel resurfaced, new clutch, gas tanks is good, new tail lights, new radiator, new alternator, newer starter, converted to 12 volt. 2 sets of wheels but needs tires, tires will hold air for a few hours. No rust! Need seats and very few things to be finished. Lost interest in this project, jeeps just aren’t my thing. No title!”
UPDATE: Still Available.
(12/22/2018) Looks like the body and front clip are fiberglass.
https://www.facebook.com/marketplace/108541499165950
“Great off-road vehicle currently registered driven regularly.”
UPDATE: Still Available.
(12/17/2018) Has a fiberglass body. Needs gas tank installed.
https://reno.craigslist.org/cto/d/washoe-valley-turn-key-vwillys-cj3a-4×4/6772855840.html
“1952 Willys cj3a..4 speed sm420 trans with a WARN OVERDRIVE..4×4..SB 283 gm crate motor..all orig gauges..mileage says 006607 miles.. I’m guessing it hasn’t flipped… This information is according to the previous owner
The Jeep doesn’t run it does Drive and it does have a 6in old rancho lift on it..
I took out the original gas tank cuz it was rusted out… All the plumbing is there and Hardware…I HAVE 2 BRAND NEW GAS TANKA TO GO WITH IT..THAT NEED TO BE INSTALLED…
I can start the motor and show you that it move…
It has a blemish-free fairly new fiberglass body on it no scrapes no scratches no dents anywhere on the outside
Very clean very solid Jeep
Has 35′ tires with nice clean old school rims..
Continue reading
UPDATE: **SOLD** Was $4500.
(12/08/2018) This might be a fiberglass body on a 1972 CJ-5 chassis. Those Desert Dog tires sure are worn!
“Possible 70s maybe 60s.
Father passed. Have jeep parked for 18 years. Last on streets 90s. Have hard top to go with . selling hard top for 1500.”
UPDATE: **SOLD** Was $11,000.
(10/28/2018) This might have a fiberglass body. It’s listed as a 1962 CJ-3B.
“1962 cj-b3 Jeep Willy lifted with a built 327 motor bored 30 over. Has a 4 speed transmission and working 4 wheel drive! Frame is powder coated. Runs strong with plenty of power and sounds great! Led bar included! Asking $11,000 or best offer! Also have all paper work and receipts”
UPDATE: **SOLD** Was $3500.
Has a fiberglass body and front clip. Has upgrades that might give this some value.
“looking to trade or sell my old willys. I just dont make the time to ever work on it. it did run, but I don’t have a battery or gas tank installed currently. I do have the gas tank for whoever gets it. ran solid before.
this has mostly GM parts..has a 283 in it, sm420 tranny. has a warn overdrive.
as far as trades I’m pretty open. I’d consider trail bikes, brewing equip+cash possibly. not real interested in a other full size vehicle. I’m looking to move this because i dont work on it and it just takes up space in my garage.”
UPDATE: **SOLD** Was $700.
It’s not clear to me who manufactured this tub, but I have seen a couple like this now.
“This is a cj2a cj3b tub, hood fenders and grill. I will throw in a rolling frame with axles. Build your own rock buggy.”
This does not have an engine or trans.
https://portland.craigslist.org/clk/cto/d/jeep-willys/6751696984.html
“Selling my Jeep Willys project. It is a fiberglass body with a tilt hood on a 49 frame (if I remember correctly). It is set up as 2wd ready for a Ford small block and c4 trans. Does not come with a motor or trans. Would be easy to change back to 4wd and would be a very fun Jeep, I just don’t have the time for it. No trades and cash in person only. Comes with title and bill of sale”
UPDATE: Price dropped to $4140
(03/11/2018) This has a V8 and fiberglass body.
https://www.facebook.com/marketplace/item/1803854853015469
“Fiberglass body tub, hood, fenders, and grill. 283 Chevy v8. new seats top gas tank brake line clutch etc. Runs great”
UPDATE: Seller is now advertising a 3A hood as well. Both were $350/each. The seller is currently not making hoods.
3A: looks a little like a cut down 3B hood, as it looks like there is the 3B horizontal bubble at the base of the hood where it meets the fender.
3B: https://seattle.craigslist.org/sno/pts/d/rcd-custom-hood-new-for/6733766315.html
“New RCD custom fiberglass hood.
Never installed.
Attaches to existing stock hood hinge location.
Shipping or Local pickup available.
Cash, Credit card or PayPal accepted.
Fits Willys CJ3b, and Mahindra CJ340 and CL340.
Reach out and see how you may be able to get this hood for your Jeep at no cost.
Please Note:
This is a brand new custom hood, not a scoop attached to an old or existing hood.
All Fiberglass products require prep-work.
ALWAYS Test Fit prior to painting!
Basic trimming and fitting and finishing may be required to achieve a your desired fit. Some Sanding, Priming & Seal Coating will be required.
Manufactured by RCD.”
UPDATE: Still Available.
(09/22/2018) Appears to have a Bobcat body.
https://www.facebook.com/marketplace/item/265751224225820
“This jeep has it all. Fiberglas tub with rolled liner sitting on a original frame. Spring over conversion Dana 44 front and rear with 5.38 gears, spool in rear and lock rite in the front, with 4-wheel disc brakes with Wildwood master cylinders and pedal. 1967 Chevy small journal 327 350 horsepower model only been on 4 trips since it was rebuilt 3 years ago. Bolted to a brand new rebuilt turbo 350 transmission with a recently rebuilt Dana 18 transfer case. Fully caged and attached to the frame. 3 suspension seats (child’s in rear) bolted to the cage with 4 point harnesses for all. 10,000 pound winch (I know it is over kill) 35 inch tires on M/T knock offs Ram assist steering with 1 ton cross over steering.”
TJ shared this one. It might be a Veepster body. A body similar to this was available for sale back in 2014: http://www.ewillys.com/2014/05/10/fiberglass-veep-like-body-kits-lakeview-or-2875/
https://seattle.craigslist.org/oly/cto/d/vw-bug-veep-kit/6704683979.html
“Volkswagon Veep on Veep sub-frame with ball joint front axel and IRS rear suspension. Kit includes front bumper, side bars, roll
bar, and windshield frame. Excellent body that has never been finished. Will come with a notarized bill of sale only. Serious offers
only.”
Travis spotted this CJ-5 with a fiberglass body (a type I haven’t seen). Looks like a good price.
https://worcester.craigslist.org/cto/d/1958-willy-jeep-willys-cj5/6702190965.html
“This is a project I bought doesn’t run but turns over, original frame and driveline, fiberglass tube, original dash hood grill for metal, converted to 12v system, I have no title just BOS”
UPDATE: **SOLD** Was $2000.
It might have a Bobcat fiberglass body.
“’45 Willys Jeep. Buick V8. Fiberglass body, no top or doors. Needs some work but runs good. Lots of extra parts. $2000.00 OBO. Calls only! Will not respond to texts or e-mails.”
This could be worth a look.
https://anchorage.craigslist.org/cto/d/1974-cj6/6682749904.html
“1974 CJ-5 extended to a CJ-6 with fiberglass tub. Has 258 i6 which runs well. Jeep is in overall good condition with minimal rust due to having the fiberglass tub.”
UPDATE: **SOLD** Was $5500.
(08/08/2018) Has a variety of updates.
“1943 Willys with fiberglass tub, mid 60s chevy 283 v-8 ,four barrel carb, headers, power steering. Interior has new carpet, tilt steering, fancy gauges, grenade shift knobs, gun rack, stereo. It has a manuel 4 speed with throttle on the stick, high lift jack, bikini top. Has duel exhaust, front disk breaks, lift kit, wheels and tires. The front axle is a dana 30 with 456 gears with power lock. Rear axle is AMC 20 with solid detroit lockers. The transfer case is a dana 18 or 20 not sure. This babies a STRONG runner, OFF ROAD/ROCK CRAWLER. Good running condition and just registered for another year!!”
UPDATE: Price dropped to $400.
Looks similar to a late 80s Bobcat body, but the dash is more angled then is should be.
https://wilmington.craigslist.org/pts/d/jeep-willys-fiber-glass-tub/6670663579.html
“tub body for Jeep or Willys
early MB CJ2 , CJ3
Flat fender type body”
Seems like a good price considering the rims and other parts. Looks to be a glass body on a CJ-5 chassis. The cutlas hubs appear in great shape.
https://salem.craigslist.org/pts/d/willys-jeep-cj5-cj-willys/6666649674.html
“Willys Jeep, Rolling chassis (less motor and transmission), set up for SBC, includes headers, Swinging pedals, Power steering, Has Title, Far from perfect, needs TLC, was drivable before pulling the motor. Tires are shot.”