Could be a good price. Might include a plow. Includes a Meyer hardtop.
“1971 Willys Jeep with Collector plates- New Brakes/Lines
$2100 OBO”
https://minneapolis.craigslist.org/dak/cto/d/1971-willys-jeep/6355158075.html
Could be a good price. Might include a plow. Includes a Meyer hardtop.
“1971 Willys Jeep with Collector plates- New Brakes/Lines
$2100 OBO”
https://minneapolis.craigslist.org/dak/cto/d/1971-willys-jeep/6355158075.html
UPDATE: **SOLD** Was $3000.
(11/05/2017) Glenn’s got this 2A with a Roger’s snow plow for sale.
“Anyone interested can contact me thru The CJ2A Page Personal Message Link or email me at glenns@tdstelme.net. It does not currently run. I can help with transportation in the New England area for cost.”
UPDATE: **SOLD** Was $500.
It will need glass and door hinges.
“I have a Koenig Hardtop for CJ5 or M38A1.
I have both doors, complete.
It will need new glass.
The only thing missing that I can see are the portions of the door hinges that go on the jeep itself.”
UPDATE: **Status Unknown** Was $3950.
This 2A has had an interesting life.
“1946 Willys Jeep. CJ-2a. Engine intact but has not been run for about 25 years. 55,000 original miles. Transmission rebuilt about 1961 with low added miles. Body exterior not rusted out. Few minor dents. One rust-out section in floor under passenger seat. Can be easily patched. Heavy welded steel top with windows and 3 doors. Tow bar included. Bolt or weld to heavy front bumper. Title old but valid. $3950.
Owned since 1962. Towed to Washington State from Upper Michigan in 1965. Kept in garages entire ownership time. Purchased from Kimberly-Clark Corp where it was used as a back roads timber cruising vehicle by present owner and other foresters in Upper Michigan and Northern Minnesota. Prior to woods use, the Jeep functioned as a tug for the corporate DC-3 aircraft in Neenah Wisconsin.”
Jim is selling his CJ-5. It’s got a ventilating windshield, overdrive, and a Meyer hardtop.
“A 1959 CJ-5. Has a Ford 302 under the hood. 3 speed. Needs a radiator and a battery. Has a Warn overdrive, rare ventilating windshield, hardtop, and 70/30 front seat. Shocks, leaf springs, alternator, and starter has been replaced within the last 100 miles. I hate to sell, but I have no time to finish. Replaced the engine that was in it from a 1971 Mustang. The ford 221 v-8 from a 1962 Fairlane that I removed, was worn out and smoking. Any and all parts I have will go with the sale. I have always wanted to do a full restoration on this one, but work keeps me away from home 11 months a year. It has been sitting under cover for 4 years. Needs minor work to run again.”
https://tucson.craigslist.org/cto/d/1959-willys-jeep-cj-5/6388206765.html
UPDATE: **SOLD** Was $2900.
The doors and top looks to be Meyer. The rear door is custom.
“1974 CJ7 army jeep number 264 has Regional dog tags .motor was rebuilt has proximately 1500 miles on it. Jeep runs good has locking hubs custom steel bumpers front and rear new floors custom aluminum back door All Steel body”
UPDATE: **SOLD** Was $450.
Appears worth a look.
“I believe this to be an early accessory or aftermarket aluminum hardtop setup for a Jeep CJ2A style jeep Willys. As found , will need lever work and new glass but not corroded”
The red Koenig full body hardtop looks complete, but the white half cab is a mix of a Kelly top (appears correct for a 2A) and Meyer doors (which are only designed to fit CJ-5s/6s/M-38A1s).
“47willys hard tops one short one long the long one was built by Koenig iron works Texas, no trades just cash”
https://kalispell.craigslist.org/cto/d/47-willys-jeep-hard-top/6372861426.html
UPDATE: **SOLD** Was $4500.
(10/17/2017) Interesting paint job.
“1947 Jeep Willys
Studebaker 6 cylinder engine
Engine converted to 12V
New 600/16 standard Jeep tires
3 stick transmission
Cash only”
UPDATE: **SOLD** Was $200.
(10/28/2017) Needs some work.
“I have what looks like a Meyers hardtop for a cj6. It has been disassembled and will need a full rebuild, but it is all there, including doors.”
Include an overdrive and a Kelly hardtop.
“ALL ORIGINAL WITH PA TITLE IN MY NAME. TUB SHOT/FRAME SOLID. ENGINE TURNS. WARN OVER-DRIVE UNIT. KELLY HARD-TOP. STILL 6VOLT. GREAT ONE TO RESTORE. -”
https://chambersburg.craigslist.org/cto/d/1946-cj2a-overdrivepower/6369357403.html
Needs some glass. Seller also has Koenig PTO stuff for sale.
“The top is in good solid shape. It could use sand blasting and paint. The doors are complete and ready to install. It could use glass. Good straight and solid top. I also have a complete Koenig PTO winch, pto, and driveshafts for sale for $500.”
https://jackson.craigslist.org/pts/d/willys-cj3a-or-cj3b-full-hard/6376505145.html
Needs some work.
“Restore a part of history. The first year run of civilian owned Willy’s Jeep. Have been garage since mid 80’s. Last time plated 93. Not original motor, but was running about a year ago. Everything else is original. Needs brake lines.”
https://indianapolis.craigslist.org/cto/d/restore-history-46-willys-jeep/6361076251.html
UPDATE: **SOLD** Was $250.
Might be worth a look.
“Top in good shape with doors and the hinges.
Needs a couple pieces of glass.”
Craig shared this ad. Looks like there is value here.
“1965 jeep Tuxcedo mark1v very rare needs starter repair and possibly carb kit”
https://plattsburgh.craigslist.org/cto/d/1965-jeep-tuxcedo-mark1v/6369403255.html
That looks to be a Cab Enclosure hardtop, which means it requires the vertical windshield.
“CJ3B high hood project Buick v6 T90 3spd Dana 20 transfer case lot’s of parts hard top don’t fit but a good fabricator can make work”
https://kalispell.craigslist.org/pts/d/1953-willys-cj3b/6370010207.html
This includes a custom wood top.
“I have a fully restored (frame off restoration) 1946 Willy’s Jeep CJ-2A. Bright red in color, comes with the original 134 flat head 4 cylinder motor. T-90 transmission in it as well with the uncommon 3 speed column shift. Jeep has been converted over to a 12 volt system. Hand made custom top along with many new parts. Came from out west not exposed to snow. Asking 7,200.00 or best reasonable offer,”
https://maine.craigslist.org/cto/d/1946-willys-jeep-cj-2a/6366155359.html
Looks like this has the external heater on it. It doesn’t run.
“952 M38 Willys Jeep with top – no title but comes with Bill of sale. $3400 – all there except gas tank; doesn’t run & head is removed (but present).”
https://anchorage.craigslist.org/cto/d/1952-m38-willys-jeep/6356525888.html
This CJ-3A has a CJ-7 hardtop reshaped to fit a CJ-3A. It looks well done. The doors are well don’t, too. Thanks to Gary for spotting it.
Listed as a 1961, the serial number suggests this is a September 1964. It has a Meyer hardtop.
“1961 willys jeep cj 5. Comes with hardtop, doors and plow. Will run off carb cleaner. Only piece missing is the radiator. Frame in great shape, rest of the body has usual rust areas. I bought it to build a cj 6 with but lost interest due to building my cj3a. Sold on Bill of sale.”
https://newlondon.craigslist.org/cto/d/1961-cj5-with-plow/6364311771.html
UPDATE: **SOLD** Was $75.
Looks like a fair price.
“Aluminum top for Willys CJ-2A Jeep…will fit MB/GPW…probably fit a CJ-3A and CJ-3B too…includes original back hatch/door…also includes a pair of front doors that could be modified to fit…just in time for deer season !!! $75…has been removed from the Jeep, Jeep has been sold”
UPDATE: Price dropped to $1200.
(09/03/2017) Koenig top resting on the back?
“Project jeep. Needs full restoration. Have extra drive train. 3 sets of axles. Extra solid frame. One piece fiberglass nose. Thinning the heard. I can do the bodywork for you at additional cost”
https://newhaven.craigslist.org/cto/d/47-willy-cj2a/6358440183.html
Looks like a solid rig.
“1948 Willys CJ2A with a 3A windshield. Chevy 350 gear drive engine, Chevy truck 4 speed manual transmission, Dana 300 twin stick transfer case, Toyota axles, rear spool, coil 4 link rear suspension, leaf spring cross over steering front suspension, 35×16.5×16 super swamper bogger tires on American Racing custom wheels, too much to list. No tire kickers. Serious inquiries only. Will only show to cash in hand buyers. $7500.00 OBO.”
https://medford.craigslist.org/cto/d/1948-willys-cj2a/6362621845.html
UPDATE: **SOLD** Was $2500.
Engine’s been rebuilt.
“Rebuilt motor. New clutch. Hard top. Needs work, but have lots of the parts new to put on.”
UPDATE: Here’s another one of these rare brochures for sale. Thanks to Bill Norris and Derek Redmond for the extra pics. This brochure has been for sale on the same eBay pager for four years. Its on sale at the moment.
This unusual fiberglass hardtop was created by the Reinforced Plastics Corp. I have yet to see one in the wild. Two journal articles (Chemical Week 1957, Volume 81 and National Defense Transportation Journal 1957, Volumes 13-14) both have announcements for the new top, pegging its inception around mid-1957. Unfortunately, Google will only provide snipped views of these University of Michigan scanned journals. The date of these journals suggests the lister of this brochure is probably wrong about the 1955 date for the brochure.