Search Results for: tub

To Top

CJ-6 Fiberglass Tub Park City, UT $2000

November 29, 2023 • CATEGORIES: CJ-6, Parts • TAGS: . This site contains affiliate links for which I may be compensated.
3

Update: Price dropped to $2000.

These CJ-6 tubs are rare.

https://www.facebook.com/marketplace/item/362065996350197

“CJ6 fiberglass tub, fenders, hood and windshield frame. Never painted. Tub never installed. On a 72 jeep commando frame with springs. No axles, no engine, no trans or t case. Grille included. Dash panel and manual pedal setup included.”

cj6-fiberglass-tub-parkcity-ut

To Top

1942 Tub and Parts Quakertown, PA $3500

October 10, 2023 • CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.
0

Zak’s selling these parts.

https://forums.g503.com/viewtopic.php?f=5&t=336639

1942-tub-parts-quakertown-pa1 1942-tub-parts-quakertown-pa2

1942 Ford GPW tub, fenders, hood, grill, windshield frame, seats and modern repair panels as shown with the ripples dents, dings, and poor patch repairs you would expect after 80 years of use. The floor and hood were cut for a larger F head engine and transmission and some point in the part along with some rough riveted patches. However all the repair panels and parts (tother than simple flat patches) are included to bring it back. Full front floor pan with hat channels that costs more than $700 dollars on its own plus repair parts including the drivers side pioneer kit area, inner rear fender/tool box panels. Inner windshield frame. Bensinger wheelhouse pockets to move the seats back for more leg room if desired. It has its original F marked seats and side grab handles. All original parts have been soda blasted and weldable primed. Rerpo repair patch parts are factory red primed. Pickup preferred but could work with buyer to arrange shipping in a crate at buyers expense. Was going to build as a LRDP jeep and keep most of the imperfections. Bill of sale only. Asking $3,500. Located in Quakertown, PA.

To Top

1943 MB w/ CJ Tub Georgetown, CA $400

October 10, 2023 • CATEGORIES: MB This site contains affiliate links for which I may be compensated.
0

Unclear how much value is here.

https://www.facebook.com/marketplace/item/335098839095540/

“Original frame with gun turret mount, axles and front grill no motor transmission or transfer case. No Title. Vin intact, out of system. 20 yrs since registered. CJ 2A tub and miscellaneous parts on body, tub is rough. Need it gone, selling as a parts vehicle”

1943-mb-g-c7 1943-mb-g-c8 1943-mb-g-ca9

To Top

Fiberglass Flatfender Tub Paso Robles, Ca $500

February 25, 2023 • CATEGORIES: Body Parts, Parts • TAGS: . This site contains affiliate links for which I may be compensated.
0

This could be restored or turned into a racer. That cowl might be a little flat to property connect with a windshield (Bobcat bodies can have the problem, too .. .ask me how I know, lol).  Plenty of value here.

https://www.facebook.com/commerce/listing/144514508498330

“fiberglass flatfender jeep tub. trade for a steel cj5 tub.”

fiberglass-flattie-body-pasorobles-ca

To Top

1943 GPW w/ CJ Tub Palo Cedro, CA $3000

September 16, 2022 • CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.
0

This is a mix of parts. It does not include a battery.

https://www.facebook.com/marketplace/item/1469853406829368

“It’s a 43 Ford, 47 tub. Was planning on getting it ready for some trails with friends but I realized I like VWs more. I think it has the original engine. Pan is in decent shape. Engine runs and transmission works although I have only ran through the first two gears on our property. Brakes need to be redone. I have all the replacement brake parts and an aftermarket wiring harness along with a second carb that will come with it. Has a soft top that is not really functional. Tires are delaminating pretty well. Great project for someone … Battery does not come with the car.”

1943-mb-palocedro-ca5 1943-mb-palocedro-ca6 1943-mb-palocedro-ca7 1943-mb-palocedro-ca8 1943-mb-palocedro-ca9

To Top

Fiberglass Tub Grover, NC $300

July 15, 2022 • CATEGORIES: Body Parts • TAGS: . This site contains affiliate links for which I may be compensated.
1

The rear wheel wells have been cut (to push seats back farther) and their are a large number of bolts through the passenger side of the body (why??), so it’s hard to say for sure how much value is here, but I suspect this body is savable. I’ve saved worse. Thanks to Mike for spotting it.

https://www.facebook.com/marketplace/item/1227895561291794

“Fiberglass flat fender jeep Fiberglass tub, front fenders and grill only no hood, chassis or title”

fiberglass-body-grover-nc1 fiberglass-body-grover-nc2

To Top

Years? CJ-3A and MB Tub on Chassis Santa Cruz, CA Make Offer

May 23, 2022 • CATEGORIES: CJ-3A, MB This site contains affiliate links for which I may be compensated.
0

The white jeep is a 3A. The green jeep has an MB tub.

https://sfbay.craigslist.org/scz/cto/d/santa-cruz-willys-jeeps/7484631248.html

cj3a-mb-tub-chassis-sc-ca1 cj3a-mb-tub-chassis-sc-ca2 cj3a-mb-tub-chassis-sc-ca3 cj3a-mb-tub-chassis-sc-ca4

“I have two Willy’s jeeps for sale. One is complete, and ran 5 years ago and the other is a parts Jeep with no motor or transmission. There are extra hoods and radiators. And fenders. I have the pinkslip for the more complete one pictured. They are 1947s the tub on the green one is pretty cool as there is no tailgate. It’s one solid wrap around piece.

Make an offer. I would prefer to sell both at once”

To Top

Fiberglass Tub and Parts Stoughton, MA **SOLD**

February 25, 2022 • CATEGORIES: Body Parts, Parts • TAGS: . This site contains affiliate links for which I may be compensated.
2

UPDATE: **SOLD** Was $1200.

The tub looks in very good shape. I would guess the seller is correct, that this is an older lightweight California tub similar to one I had from the 1970s. ‘$1200 gets you everything. $1000 just gets you the tub.

fiberglass-body-stoughton-ma0 fiberglass-body-stoughton-ma1 fiberglass-body-stoughton-ma2 fiberglass-body-stoughton-ma3 fiberglass-body-stoughton-ma4

“We have available a fiberglass replacement tub for a flat fender Willys Jeep.

I believe this is for a CJ2A / CJ3A setup…but, maybe it also fits military MB M38 Ford GPW? Even though they had the high hood and slightly taller cowl I think it could potentially fit CJ3B , too?? The last photo shows the height of the cowl.

Doing some searching online I see ACME & Brian Chuchua’s may have made them at one point…but otherwise I don’t know the manufacturer.

This was from a project that started, but never fully mounted. Some holes were started on the firewall, and the fenders look like they started to get cut on the inside, but otherwise it’s still relatively “new”. Has some extra metal brackets / supports for around the firewall. It’s relatively light, but still feels solid.

Also available/included was a Bestop soft top (just the skins & doors no frame work) and 2 black front seats.
$1200 for everything or
$1000 for the body tub with fenders (I shouldn’t have to say this but CASH ONLY no electronic payments or checks!!)”

To Top

1952 M-38 Tub and Parts Collinsville, OK $3000

February 5, 2022 • CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.
6

This might be worth a look for someone who needs an original(?) M-38 body.

https://www.facebook.com/marketplace/item/1066041500608628

“M38 Willy’s Jeep Tub. Comes with fenders, front grill, seats, fuel tank, and fuel can holder. No rust. No frame. Should fit CJ-2A frame. No title. Must be able to pick up. It is currently located at my Dad’s house. Coordination for pick up will have to be done”

1952-m38-collinsville-ok02 1952-m38-collinsville-ok01 1952-m38-collinsville-ok0

Continue reading →

To Top

1959 DJ-3A Tub and Other Parts West Jordan, UT $1200

December 11, 2021 • CATEGORIES: DJ-3A, Parts This site contains affiliate links for which I may be compensated.
2

Here’s a rebuilt DJ-3A tub with some non-DJ parts.

https://www.facebook.com/marketplace/item/274251058090113

“Have a restored 59 Jeep Willys tub Forsale no rust and in excellent condition. Also have a nice windshield frame with looks like new glass, rust free fenders,hood and grille. Located in Salt Lake City , Utah.”

1959-dj3a-body-westjordan-ut1 1959-dj3a-body-westjordan-ut

To Top

CJ-3B Tub Columbus, GA **Status Unknown**

July 29, 2021 • CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.
1

UPDATE: **Status Unknown** Was $500.

Unclear if this is an early or late tub.

“CJ3B tub that was sand blasted to bare metal has some dents and needs alittle of work not rusty”

cj3b-tub-columbus-ga

To Top

Fiberglass Later-Model CJ-5 Tub West Bridgewater, MA **SOLD**

February 6, 2021 • CATEGORIES: Parts • TAGS: . This site contains affiliate links for which I may be compensated.
2

UPDATE: **SOLD** Was $1500.

This looks to be a good price.

“76-82 cj5 tub. The tub is professionally rhino lined inside, underneath, and firewall. Was fitted to jeep but never fully installed. Nose could use a little work but is in decent shape. $1500”

cj5-tub-westbridgewater-ma1 cj5-tub-westbridgewater-ma2

To Top

CJ-2A Tub Conifer, CO **SOLD**

December 23, 2020 • CATEGORIES: Body Parts, Parts This site contains affiliate links for which I may be compensated.
2

UPDATE: **SOLD** Was $525.

Seems in pretty good shape.

“This is a CJ2A tub in overall very decent, solid condition. The previous owner had it sandblasted and started replacing rusted panels and supports…then let it sit outside for some time. The rust you see is mainly surface rust from sitting. The tool box has already been removed (and is gone), so this would be an ideal tub to stretch for a rock crawler project. Rear floor and wheel wells are in very good condition. The dash has not been all cut-up for extra gauges, radio, speakers, etc.”

cj2a-tub-conifer-co1 cj2a-tub-conifer-co2 cj2a-tub-conifer-co3 cj2a-tub-conifer-co4

To Top

1963 CJ-6 Tub Colorado Springs, CO $1000

December 10, 2020 • CATEGORIES: Body Parts, CJ-6, Parts This site contains affiliate links for which I may be compensated.
1

UPDATE: Price dropped to $1000. This CJ-6 has export VIN plates suggesting it was originally supposed to be exported.

https://cosprings.craigslist.org/pts/d/colorado-springs-1963-jeep-willys-cj/7230230269.html

1963-cj6-rhd-tub

The price is for the tub only, not other parts (which are listed elsewhere on Craigslist.

“I have a Colorado titled 1963 right hand drive Jeep Willys CJ-6, one of the rarest CJ6s in the country. This one is the oldest RHDs, from what I could tell. I have multiple options for buying. Once sold, that’s it, it’s gone! Feel free to ask me any questions. I can provide pictures of any parts you’d like to see. I am looking for cash but might take a partial trades for planar machine, a radial saw, cnc router, or maybe other tools.

—-
This sale is for the tub & title only and doesn’t include other parts seen in the pictures.

$1000 – Which includes the Colorado Title, VIN, RHD CJ6 tub, and the Rare Export Plates (original & remade).

PARTS DESCRIBED:

Colorado Title: Clear Colorado Title ready to sign and hand over to the buyer. Goes with the VIN.

Export Plate: The export plate that I am referring to has English, Spanish & French on it. I don’t know what its called. I simply call it the “export plate.” Pictures can be seen with this ad. The original export plate was damaged, so I paid to have it remade and it came out wonderfully. I have only seen this plate on 1 or 2 jeep (pictures) in Europe. I have not seen it in the USA. Rare. Rare. Rare. Continue reading →

To Top

1948 CJ-2A Tub/Frame Banning, CA $1500

November 1, 2020 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

Not sure there’s much value here. Axles NOT included.

https://inlandempire.craigslist.org/cto/d/banning-1948-willys-cj-2a-crawler/7216843104.html

“Up for sale is my 1948 Willys CJ-2A project, selling the Tub and Frame. *Axles NOT included* The tub is in better shape than most, has some rust and some Bondo. However I didn’t care, as it was going to be a rock crawler. I also have a spare wind shield that is included. The frame is made from 2″x4″x1/4″ steel and excepts YJ Leafs, as shown in the photos, I bought it from a couple guys in Nevada. Other than that make me an offer, i’m not looking to sell separately.”

1948-cj2a-banning-ca0 1948-cj2a-banning-ca1 1948-cj2a-banning-ca2