This may well be worth a look. Only two pics and no description provided.. Thanks to Andy for sharing.
https://www.facebook.com/marketplace/item/1182733133089367
“Only call if you want an appointment and bring cash”
This may well be worth a look. Only two pics and no description provided.. Thanks to Andy for sharing.
https://www.facebook.com/marketplace/item/1182733133089367
“Only call if you want an appointment and bring cash”
TJ spotted this 3B. It looks like it has potential.
https://www.facebook.com/marketplace/item/1142947720078906/
“1953 jeep runs, drives. All original complete!! Tow bar, wench.”
Nice looking 3B with some updates.
https://www.facebook.com/marketplace/item/452256034013218
“Must see original forest service jeep restomod balanced 231 V6 T14 transmission D18 transfer case and new overdrive front disc brakes updated steering aluminum centerline wheels new warn hubs oem fog lights restored koenig hardtop with new oem locking hardware ventilated (swing out) windshield restored original harrison heater. everything new or seriously rebuilt. a nicer 3B will be very hard to find.”
Here’s a good looking wagon. It may be a Parkway Conversion.
https://www.facebook.com/marketplace/item/886654046550409
“Good running, stripped and new paint, clean, stripped and painted frame, new gas tank, needs engine gauges cluster fixed. Three on the tree manual.”
Andy spotted this CJ-5 with a lift and rear pto gearbox installed. It also includes a Koenig half cab.
https://www.facebook.com/marketplace/item/800528775057518
“‘m selling a Willy’s Jeep with a 2-point lift and PTO original to vehicle. The jeep has a title. I bought this as a project a while back haven’t done anything with it the previous owner did quite a bit of work on it the whole entire body was sandblasted metal is in really good shape which is rare. Body is primer with Automotive primer. will not take much work to finish body. Motor is unknown Currently out of the vehicle I was told it is going to need a rebuild I have a box full of parts off the engine looks like I have everything needed. All the hydraulic lines were replaced hydraulic cylinder repacked drivetrain gone through . All by previous owner . Brand new tires were put on a couple years ago no miles on them. This Jeep also comes with a factory plow pump and half cab with doors all original will not separate must buy everything these Jeeps with the three point hitch and 540 PTO are very rare especially in this condition.”
Solid, mostly original CJ-2A.
https://www.facebook.com/marketplace/item/2695146160666071
“All original 1947 Willy’s Jeep, drives and runs great!! $9500! OBO”
Bill’s selling this hard-to-find transmission PTO box. Thanks to Andy for sharing it.
https://www.facebook.com/marketplace/item/1037905381185513
“Go-for-Digger Trenchers were built on Willys and Kaiser-era Jeep CJ5’s duallys from the early 1960’s to the early 1970’s. There has to be a few more of these left out there, maybe one in need of parts…
Power transmission box PTO for a Go-for-Digger trencher with a build date around 1969/1970. As you see it. Spins freely. It’s one of 3 parts that I have left from a resto-modded CJ-5 that I built.
Another part is a correct front bumper with the solid steel bar reinforcement and blade lifting chain. Pics show bumper still attached.
The third part is the full-length set of 3/8” (I think) steel outer frame reinforcements that came on the GFD Trencher (and maybe the backhoe). Better pics soon, but if you know these things, you know what I mean. They are on the floor in last pic.
Pick up in Lancaster, PA.”
Andy thinks this may have a Dump-O-Matic bed. I can’t tell for sure.
https://www.facebook.com/marketplace/item/1639217990222816
“1950’s era Willys Jeep. Everything is there. For restoration or parts.”
Unclear how much value is here.
https://www.facebook.com/marketplace/item/1165242074605006
“1950 Jeep Willy’s CJ 3a No engine or, seats, or windshield. Has t90 3 speed with small block Chevy bellhousing conversion, model 18 transfercase, Rear brakes are currently frozen 2” BDS lift springs Frame has Saginaw steering box plate and Chevy motor mounts installed. Body is in completely saveable condition. Extra grill. Boxes of parts to go with it. Some used lots new. Full disk brake conversion new in box New rear brake parts New mounts, spring plates, headlight rings l, etc. Don’t have time for another Jeep build like i thought I would. Bill of sale only, bring a trailer.”
UPDATE: Still Available.
(12/02/2023) Hard to tell how much value is here. It does have a Beck or Kelly hardtop.
https://www.facebook.com/marketplace/item/1068718597487403
“Runs , all original. But rims . $6500.00 . O.B.O . No trade, please don’t ask .”
UPDATE: Accidentally had this year as the 30th year!
This year marks the 31st time the Spring Willys Reunion has been held. My hope is that next year I or we can figure out a way to attend with the tour jeep in tow.
I won a HiBid online auction yesterday that included this Mobile Drilling Inc., operation and parts booklet. I am hoping this proves an interesting document!
This was included in an odd assortment of jeep and non-jeep docs.
UPDATE: Geoffrey won this Al-Toy body auction on eBay and then got the lights working. He’s wondering if anyone has a parts to help make it into more of a complete model?? It appears he needs wheels and a windshield at the very least.
Previous pics from ebay:
This truck brochure from Canada caught my eye on eBay, because it labeled the truck as a 2WD DJ-226. I suspect the brochure is from about 1960.
UPDATE: This post now contains better photos of the brochure.
I purchased this Japanese Formula Desert Dog brochure. I thought it was interesting that both solid and outlined version of the tires were offered simultaneously. I’ll update the pics when I receive the brochure.
This is a beautifully updated wagon.
https://www.facebook.com/commerce/listing/1012455250306483
“1951 Willys Wagon 2 wheel drive,289 auto, front disc brakes, Mustang rack and pinion, updated electronic gauges, new white wall tires and Chrome wheels $13,000.00 or Best Offer. too many projects got to let it go.”
This is a nice looking FC.
https://www.facebook.com/marketplace/item/776024580937825/
“Very rare jeep model, the fc or forward control, is an amazing addition to any jeep or classic truck collection. Fully restored in 2014, this truck is mostly all original with minor exceptions. It runs great, looks great and gets a lot of attention for is unique design and rarity amongst jeeps. 3 speed on the floor, 4×4, overdrive, lock hubs and many more amazing features on this 1958 Jeep FC150 For more information on the truck visit: https://www.pressreader.com/canada/calgary-herald/20160316/282535837481207”
UPDATE: Price dropped to $8500.
(03/05/2024) The seller is correct; this is a classic PNW build, with the Desert Dogs, a V6, the diamond plate corners, the diamond plate side pieces, the Bobcat Hood, along with other updates.
https://www.facebook.com/marketplace/item/459634346632408
“The time has come for me to sell my 1946 CJ2(ish) little beast. It’s sporting a Buick 198 fireball, t90, bobcat hood, Cadillac telescopic column, rather beat up 64 corvette seats, full set of Desert Dogs, ect ect. The top is pretty beat up but keeps the weather out about as well as you could hope. All and all a great example of a classic PNW jeep. It runs and drives but could certainly use a tune up as I’ve not been driving it much at all (hence the sale) Mainly looking for cash but could be open to trades for a newer jeep that would be more daily driver friendly”
UPDATE: Still Available.
(04/25/2024) Looks like a solid FC.
https://www.facebook.com/marketplace/item/441229255047983
“For sale 1958 Jeep FC170 has a 289 engine that runs good with new carburetor. Has a warn overdrive. Like new tires new speedometer and cable. Also has an extra shifter dash a 4 barrel intake.. Clean pa title. Message me with any questions”
Andy shared this truck. No interior or engine pics provided. It appears the chassis has had quite a bit of restoration.
https://www.facebook.com/marketplace/item/1118887306031920
“75% restored to original condition 6 volt system runs drives stops all lights work comes with the 3 steel repair panels that it needs I do not have the original seats needs king pins rebuilt and new clutch”
Unclear if $1500 buys all the parts or not. This includes a PTO with rear gearbox. Thanks to Andy for sharing it.
https://www.facebook.com/marketplace/item/1853098215137637
“No title. 46′ CJ2A with PTO and misc parts as shown. The frame has a bent front rail but bumper and replacemens rail parts come with it. Comes with tub, tail gate that need work. Also includes grill and other parts shown. Message me with any question”
Bill shared this rather high price for a Nelly Belle pedal jeep.
https://www.classicautomall.com/vehicles/5120/1954-roy-rogers-nelly-belle-pedal-car
“A 1954 NellyBelle Jeep pedal car in unrestored but still in usable condition, well as long as you’re on the smaller of stature side. Perfect for a mancave or to bring along when you show off your real CJ2A. Now a bit of history thanks to Onlinebicyclemuseum.co.uk ‘NellyBelle’ was among the most popular items of Roy Rogers memorabilia sold during the currency of the TV show, (and since), and jeep models were sold in various forms. A small diecast model was marketed by Stuart, and a 15″ plastic ‘Nellybelle’ was sold by Ideal, complete with a trailer, character figures and Trigger the horse. Marx made a large pressed-steel version, as well as a plastic model in its Roy Rogers Rodeo Ranch Set. The pressed-steel Marx model was the most accurate in colour to the original: with a plastic Pat Brady driving and Dale Evans in the passenger seat, it was 11.75″ long and 5″ wide, and included the cut-out below the windscreen on the passenger side through which Roy Rogers shot his gun. Saddle up pardner!”
TJ shared what looks to be a good foundation for a restore or rebuild. The price includes sales tax and title fee (if you are an ID resident). It’s being sold through a dealership.
https://www.facebook.com/marketplace/item/313826645081013
“I have a 1949 Willys Overland pickup. Clean title in my name. Perfect for building into a rock crawler. I’m building a Willys right now as a rock crawler and I don’t need two of them. No engine, no transmission. I have the bench seat for it, not shown in pictures. It has great patina. Located in Marsing, Idaho. Price includes sales tax and title fee, if you’re an Idaho resident. If not, you pay the sales tax in your state. Being sold through the dealership.”
This looks to be a CJ-2A with a replacement body. On one of the pics the CJ-2A transmission crossmember is visible.
https://www.facebook.com/marketplace/item/315487791442327
“Does run but needs carburetor , brakes do not work , Installed New Battery and Carb. Kit. I believe it is a CJ-3A. Price for Jeep and parts. Year and condition of parts unknown.Clean NC title. No trades Cash only. I’m listing this for my husband he does not do computers”
This has some updates, including a Volvo engine, along with a Warn winch.
https://www.facebook.com/marketplace/item/1500494700868577
or https://bend.craigslist.org/hvo/d/redmond-1947-willys-jeep/7743265661.html
“1947 Willy’s jeep. 4 cylinder Volvo motor, tow bar. Does not run as it needs a wiring harness. Updated frame”