UPDATE: Price dropped to $1300.
(04/11/2012) Not perfect, but I’ve seen much worse.
“FOR SALE: 1942 – 1943 WILLYS JEEP TUB
Good condition.
Very minor rust.
$1,300.00 OBO
Please call (818) 437-1577 if interested.”
UPDATE: Price dropped to $1300.
(04/11/2012) Not perfect, but I’ve seen much worse.
“FOR SALE: 1942 – 1943 WILLYS JEEP TUB
Good condition.
Very minor rust.
$1,300.00 OBO
Please call (818) 437-1577 if interested.”
Maybe some value?
“HAVE 1946 WILLYS BODY, THAT SHOULD BE BROUGHT BACK TO LIFE AND A ROLL BAR FOR THE SAME YEAR… CALL 989-984-0408 THANKS”
UPDATE: Price dropped to $275 and then was quickly sold.
This looks like a later model Bobcat body to me. I owned one for a short while similar to this with the very wide lip around the rear of the body.
“fiberglass flat fender jeep body cj2 or cj3a exta right fender no hood.”
This might be worth a look.
“Body near complete has some rust in the floor have the fenders and the hood and some other parts. Make an offe. has a title. call Ken 861-7724”
The seller is moving and must sell.
“Over $300 bucks on line plus shipping. Some scuffs on primer from being loose boxed, no damage. Moving and cleaning…”
UPDATE: Still Available
(06/06/2011) It might be a repo, but it’s also worn based on the windshield gasket marks. I might have posted this one previously.
“I have a 1950 reproduction flat fender body, complete with body tub, fenders, hood, grille, spare tire carrier, seats, windshield, arctic insulated aluminum hard top, doors. All of it is in excellent condition and the body parts are all solid with no rust. It is currently painted olive drab green. If interested please call David @ 503-803-0648”
UPDATE: This likely sold. Was for sale at $425.
“I have a 1943 Jeep military body with windshield frame, hood, and partial undercarriage for sale. The front fenders, grill, and hood are in nice shape although they have some bondo, but the body tub is pretty rough. It needs a new floor and side steps, and some other work here and there, but it’s saveable if you have the time. The driver’s seat frame is there, but the passenger’s seat is probably junk. The undercarriage has the frame, the springs, and both axles, the pedal arms, and not much more. The front axle is disconnected and just laying there, but it has the tie rods and is complete except for the drive flanges (or locking hubs if you run those instead of a full- time drive flange).”
No pics provided.
“1948 Willys Jeep Body CJ2A good shape with title. 1000.00 OBO Call Dale @ 413-539-0440”
I’m sure someone could use this.
“New replacement flooring kit for willys jeep cj2a and cj3a. Ready to weld in your tub. This sells for about $575 plus shipping online.”
The seller is selling the body/fenders/tailgate/windshield.
“I am selling the body to my 1952 cj3a minus the grill. I am restoring my jeep back to show room condition and this body will not work. If you have a project jeep you need parts for or you are building a rock crawler this body might be what you need. The windshield frame, tailgate and hood are still in good condition. The flat fenders need sheet metal work on the mounting bracket locations. The body tub needs work but the firewall, dash and top cowl are in good shape. Its the floor that needs the work. The body panels are reusable depending on your needs. The body parts are all stamped WILLYS as well. I will take $650.00 CASH ONLY. I am keeping the grill and I will not sell individual pieces. A new windshield alone is $600.00 so $650.00 is my bottom dollar. 660-676-9707”
UPDATE: **SOLD** Was $500.
That appears to be a Bobcat body, but I can’t tell for sure. This might a good price.
“Late 40’s Willys CJ2 tub and frame. The tub is aftermarket fiberglass and has never been used. The frame is very straight and has been boxed in. There are front fenders, grill, and hood, but no windsheild frame. Has been stoored inside. I also have many other odds and ends that can go such as a turbo 350 with 205 transfer case, brand new 35×12.50 15 wildcat xtx tires on wheels, jeep wagoneer axles, ect”
Maybe someone could use these?
“51 willys jeep complete tub with windsheild fenders and hood, just needs rolling chassis. 57 cj5 willys tub no fenders. make offer. possible trades. 928-853-0864”
UPDATE: *Fenders sold**
“These parts are off my 51 jeep willys.
* aluminum rocker cover/gards $50
*custom steel fuel tank, alittle bigger then stock. clean/no rust $50
* aluminum corner gaurds $10
* aluminum dash powder coated blue with a
Black vein. It has some gauges in it as well. $40
* custom tube grill wth off road lights powder coated blue with Black vein $50
Any questions or want more pix
Please tex 3604023307
Thanks for your time”
UPDATE: **SOLD** Was $350.
Looks pretty rough.
“I have a willys m38 body that I am selling. Not sure if it’s 51 or 52. Sorry there are no plates with this tub. The rest of the jeep is not for sale, only the tub. There are no fenders, hood or grill included. You do get the tail gate. I can deliver for an extra price inside the Houston area. Feel free to ask questions.”
“Willys Jeep left front fender, slight rust on outer fender brace. Otherwise in fair to good condition. This will fit from 1946 to 1963 CJ2A, CJ3A, CJ3B, MB, M38.
Asking $75.00
970-631-2747 email or text only”
UPDATE: **SOLD** Was $1100.
This is a hand made body advertised as a CJ-2A kit, but looking more like a MB/CJ-3a kit.
“What we have here is a complete body “kit” for a CJ2A or 3A. The tub was hand made by a guy in New Hampshire, THICK sheet metal, all custom welded, VERY solid, the fenders are again hand made in very thick steel, the hood, grille and windshield are all stock parts. All parts have some surface rust from sitting , but NO rot”
UPDATE: Still Available
(12/03/2011) It’s been modified.
“I built this tub years ago for a rock crawler, and never finished it. Now the tub is sitting in my back yard rusting. It would make a killer rat rod, or finish it as a Jeep.
The entire floor has been replaced with 14 gauge diamond plate, and the rear has been moved up 6″ I have a windshield frame, grill, hood, a set of fenders, and a tail gate to go with it. The fenders are kind of beat, but the rest is great. Asking $500 for all of it, and will not separate! So far it has very minor rust, that’s only on the surface. I don’t have any pix in it’s current state, but can get some if you need them.
I do have all the paper work for a title on this one, so it can be street legal!”
UPDATE: Back in May of 2011 Mike forwarded me the below ad. This morning Craig pointed out that Dan over at Hemmings did a nice article about the stainless bodies along with the seller of these kits.
The buyer apparently bought out a stainless supplier in the Philippines. Call the seller for more info.
UPDATE: **SOLD** $150 … note the piece across the front of the rear wheel wells. I’ve seen similar installs on other jeeps. Unclear if this was an aftermarket piece or not.
“Cleaning out shop.
I bought this to get parts for another that I am rebuilding. This offering is for the tub/body only with good clear title, and it is probably only good for a mudder. There is no tailgate.
Please leave a contact number if replying to this ad due to all the spam.
Thanks
I will be posting other misc. stuff such as seats, grilles, radiators, gas tanks and windshields soon, as I have time to take pictures.
It can be seen at my work:
Alleycat Surplus
12255 SE 282nd. Ave.
Boring, Oregon 97009”
No pics provided.
“set of fenders for a mb/gpw 1941 to 1945 military jeep $50 each. will work on other flat render jeeps. also a cj3b hood $50”
UPDATE: **SOLD** Was $350.
I can’t quite tell how good the condition of the body is.
“this is a clean tub with only surface rust no rot thanks frank”
UPDATE: **SOLD** Was $2200.
This strikes me as a Bobcat body? Whichever it is, it is rare.
“Willys Jeep high hood fiberglass body, hood & grill. Never used $2200.00 Call Tom 253-307-0374”
oooh … the fiberglass hood shown is the same one I had on my first jeep. There have been only a few made.
“i got a fiberglass jeep tub, fenders, 2 hoods, 2 grills, a wind shield frame with cracked glass, and a cage. i stll have a rolling chassis but in rough shape and going to take to scrap if not interested.
please contact Brenden at 253-230-6846 call or text voice mail not set up, will respond asap to text
price is $500 or what i can get out of it”
There may be value here.
“I have a 1953 willys jeep I was gonna restore and other things have come up. It has some cancer and dents and still needs to be restored it’s all in pieces the parts I have for it include frame axles leaf springs pto winch tranny tub window frame wheels seat frames fenders and four boxes of misc. Interior parts like knobs gauges ect. This jeep has no title Would like to sell all at once but I will sell just parts text or call with any questions or for more photos 971-218-3212”
UPDATE: Still Available
“I have a 1949 willys jeep replica in stainless steel body brand new in box includes “tub doors fenders hood grill tailgate top rowbar lights dashboard” complete body. You are biding for the complete kit for more info plss contact me any time at 832 433 3512 thanx mark …”