UPDATE: **SOLD** Was $1200.
“Relisting my 46 Willy’s Jeep cj2a for parts or restore. Complete. Bill of sale only..”
UPDATE: **SOLD** Was $1200.
“Relisting my 46 Willy’s Jeep cj2a for parts or restore. Complete. Bill of sale only..”
UPDATE: **SOLD** Was $2900.
Bob spotted this one. It mIght be a good price.
“1948 Jeep CJ-2A. 4 cylinder/ 6 volt system. Meyers plow system/ 12 volt. No hydraulics. Everything works/runs well. Body in fair condition. Would be a great historical vehicle to restore.”
Not a great paint job, but this still might be a solid jeep.
“4 cylinder, 3 speed, has pto,4×4,new super swamper iroc radial tires, brakes, brake lines, windshield, front wheel bearings,spring shackles, runs great, fun to drive, CASH ONLY, no shipping, and I don’t need help selling it, thanks. I will post more pics next week.”
UPDATE: **SOLD** Was $3500.
Has some modifications.
“48 jeep, original drive train, flat head 4cyl.,spring over axle conversion, needs brake work, runs good. Body was painted, floors were patched with metal but they could have been done better. Took on trade and don’t need it, I’m 6’5″ and can’t hardly sit in it. ”
The jeep has been sitting a while.
” have a1946 cj-2a jeep , I am the second owner of the jeep. I have a clear North Carolina title. The body is in good to fair condition with rust under the tub. I recovered all three seats and painted it 4 years ago. The motor runs great . It will need to have the breaks gone thru tho. I replaced the master cylinder but did not go through the drums or replace the lines. The plan was to restore the jeep but to many projects and no room for it now. Will consider trade on a 1. 6 motor or diesel air compressior. I have added more pictures to give a better look at the entire jeep. As you will see the tube has rust but considering it is a 1946 it ant that bad. The vin# is 75602 . I have not tried to get it running. It has been setting in my shop for the last four years. Again I will consider trade. The jeep is not running and has not been cranked in at least 5 years . Also I have four original wheels that go with the jeep.”
Creative way to solve the photo download issue.
“Pictures tell the story. 1948 willys, used to be a plow truck so the body’s rough but the engine well cared for. Lots of new and extra parts on / with it. Call for text Dan most anytime of the day for any and all questions. Come on down and take it for a spin your self. Bought as salvage from an old farmer so we have no title. Couldn’t get the pictures off my phone so if a clearer picture is needed just ask.
NOTE: as an MN plow truck it has a strong heater, tall tires, and a removable homemade cad unlike most for sale.
New, muffler, starter, battery, spring stacks, four box new shocks to be put on. Resent work, rewired electricals, reset timing, transmission fluid and caps replaced, points reset, homemade removable cad. Includes everything jeep related (anything I may have forgotten to list).”
UPDATE: **SOLD** Was $750.
(05/24/2015) Parts rig.
“1948 cj-2a willy jeep…for parts or fix…needs tin work, but not all patched up…motor stuck…asking $750, as is…”
UPDATE: **SOLD** Was $2995.
(04/29/2015) Based on the serial number this should be a VEC, but there are no tool indents.
“NEED A JEEP TO RESTORE?? Fully restore this jeep and you could possibly sell between 10-13K on Ebay.
Check out this 1946 CG2A Willy’s Jeep. Serial #17158, Flat Head, 4 cyl engine, Soft top, split windshield fold down. Needs TLC. Selling AS IS. $2995 or best offer.”
UPDATE: **SOLD** Was $10,5000. It has a Muller Top
“THIS IS A 1965 WILLYS THAT IS EQUIPPED WITH A 1969 WINDSOR 302 MOTOR WITH HEADERS AND A C4 3 SPEED AUTOMATIC TRANSMISSION. THE BODY IS AN AFTERMARKET ONE PIECE ALLUMINUM BODY MOUNTED ON A 1965 JEEP CHASSIS. (REGISTERED AS 1965 JEEP). TOTAL FRAME OFF RESTORATION FROM THE GROUND UP. WAY TO MUCH TO LIST, ONE YOU MUST SEE AND DRIVE.”
UPDATE: **SOLD** Was $4000.
Looks like a solid 2A.
“Runs and drives , great for a person who wants to restore, newly reapolstered seats and converted to 12 volt system, been in my family since 1963.”
UPDATE: **SOLD** Was $5500.
Some unusual polkadot fabric.
“PURCHASED FROM A FRIEND WHO BOUGHT IT FROM THE MAN WHO BOUGHT IT NEW, THAT DOESN’T HAPPEN OFTEN ANYMORE, HE WAS 90 AND THIS WAS HIS PRIDE AND JOY, HAS BRACKETS ON HOOD FOR HAULING HIS ELK HOME, FLASHLIGHT HOLDER ON STEERING COLUMN, I AM NOT CHANGING A THING COMES WITH MANUALS AND PARTS, BELL CRANK NEEDS A KIT, COMES WITH IT…..CAN’T BUY A FOURWHEELER FOR 5,500 THAT’S MUCH GOOD, FLAT FENDERS HARD TO FIND HAS A CJ3A WINDSHIELD AND TOP BECAUSE A TREE FELL ON IT IN 52, ”
UPDATE: **SOLD** Was $5000.
(09/22/2014) Looks solid.
“$5000 obo, Toyota front and rear ends, Chevy transmission and transfer case 4 three v6 complete rebuild. Consider trade, Darrin”
UPDATE: **SOLD** Was $1800.
(11/02/2013) It’s a project.
“1947 jeep willys flattie. This is a project vehicle that has everything minus the engine. It is all setup to run a small block ford v8 in front of the c6 auto transmission, but i already sold the mustang motor that was in it. I started ground up restoration, taking the body off and sandblasting/painting the frame. Body is solid and virtually rust free (except some surface rust due to unfinished sanding and priming), as this was a southern tennesee vehicle. I have titled the vehicle in wisconsin, so no issues there. Basically an easy project to put back together as there isn’t much complication to these early jeeps. Flatfenders are getting harder to find in good condition, and this one is already all setup for a v8! Definayely will be one of a kind when finished. Asking 1800.00 or best offer, as I don’t have the time to finish.”
UPDATE: Was $900. **SOLD**
Looks like a great price.
“1946 CJ@A Jeep, new full top, rebuilt carb, rebuilt generator, runs drives and is registered. titled”
Looks ready for some jeeping.
“1948 Willys flat fender. True track positraction front and rear, built 305, power steering, tilt telescoping wheel, power disc front brakes, full floater rear, new 35″ boggers, full cage, stainless fenders.”
UPDATE: Was $3600. **SOLD**
The windshield is funky.
“In July 2013 I purchased this jeep as a restoration project for my husband. He had begun the basics. The awesome thing is it ran great & we had taken it, playing in the desert, numerous times. He was diagnosed with cancer Jan. 2014 & crossed over 55 days later. Although I hate to part with it… It deserves more than just sitting in a garage.”
UPDATE: Seller ended last auction. Buy-it-now price dropped to $8000.
Here’s a very restorable VEC. It is one of the last 1945 CJ-2As produced.
“Original 1st year civilian jeep ,#1809 out of 1824 all 3 I’d tags present, body and tail gate numbers match # 1821. This jeep has had all systems rebuilt at one time by me. Runs drives like it was designed. Frame and body never been butchered or modified. Original springs and shocks,converted to 12 volt with stock generator. Optional rear seat with grey leatherette cover. Slight rust in step Chanels.”
UPDATE: **SOLD** Was $500
“Selling a 1946 CJ2A Jeep. Complete parts jeep, has electric plow set up, missing passenger seat. Asking $500 obo. Thanks!”
UPDATE: Price bumped to $4500.
“1947 Willys Jeep, runs good, flathead 4cyl. 4X4 all works good lot’s of fun. ..”
http://kansascity.craigslist.org/cto/5064408969.html
This is how it looked previously. Has similar steps and tow bar attachments.
May be a good price.
“1946 cj2a. Original top. Runs and can drive in 2nd and 3rd. 1st and reverse stopped working last winter. Includes original bill of sale and manual.”
UPDATE: **SOLD** Was $3000
(12/16/2014) “This unit is good running condition. Currently used as a run about and hunting. Has Studebaker Champion 6 cylinder L head engine; full aluminum metal cab; 2 heaters. Includes spare transmission and transfer case and tow bar.”
UPDATE: **SOLD** Was $4500.
(05/27/2015) I see nothing to indicate this is a 1945.
“I hate to let my jeep go but we just had another baby and I need to free up room in the garage and my wife won’t let me put a car seat in it. ha
Its a 1945 Jeep Willys. It has the factory Go Devil Engine and 3 speed.
It runs great and fires up the first time every time.
I have put a lot of work and money into it mechanically.
All the work was done at C&Ds Performance here in Mansfield.
Gayland just stumbled across this auction of various Jeeps around the country. The auctions end between 10-14hours (8:19 PST right now).
NICE VEC CJ-2A in Nebraska: https://www.proxibid.com/asp/LotDetail.asp?ahid=4742&aid=95963&lid=25003216&rts=/asp/searchadvanced_i.asp%23searchid%3D42887817%26type%3Dlot%26search%3Djeep%26sort%3Drelevance%26view%3Dgallery%26length%3D25%26start%3D101%26refine%3D#topoflot
UPDATE: **SOLD** Was $2500
Looks to be a DJ-3A body and windshield on a 2A chassis.
“willy’s with pto winch! runs good.
asking 2500.00 obo”