Except for the probable f-head update, this looks very stock.
“1951 Jeep Willys CJ3A 4×4, have the original title. If interested please email, thanks!”
Except for the probable f-head update, this looks very stock.
“1951 Jeep Willys CJ3A 4×4, have the original title. If interested please email, thanks!”
Bobby just bought a nice 3B, so he’s selling this project.
“I had this jeep of mine running a few years ago and decided to go lighter in weight with the fiberglass body. The jeep is in pieces, I have all the parts, when this jeep was up and running it was running a modified 350 Chevy motor, 4 speed Muncie transmission, headers, Moroso racing heads, and dual four barrel manifold, custom built four core radiator. I have decided that this project must go. The jeep is not put together; I removed the heads from the motor and stored both of them in my basement. This project started a number of years ago and never got the attention required to complete it. Asking $3500.00 for everything, ”
UPDATE: **SOLD** Was $2400.
This runs and drivers, but needs work of some kind.
“Looking to sell my Willy jeep.. Bought to be a project and have just not had the time or money to work on… Kinda a miss match of stuff.. Has Buick v6 engine with stock drive train… Has 33 12.5 15 wildcat tires with crager style wheels… Runs and drives although dont recommend driving much on the street.. Has roll cage and has been set up as an off roader. Has been set up to register and doesn’t have to pass smog sense it a 51… Would be a fun off road project truck or whatever you wanna make it.. 2400.00 no trades”
UPDATE: **SOLD** Was $17509.
Not the prettiest jeep, but it might have potential.
“Great for hunting, wheeling or cruising, I have been driving this rig for years and love it, just need to get rid of a few things. It has a 134 f-head 4 cyl, hence the hood scoop, motor was rebuilt a number of years ago but only has around 3000 miles on it, the transmission was rebuilt less then a year ago. New master cylinder and radiator. The soft top and doors are rough but still serve their purpose, have the original rims and a box of extra parts. Body is also a pretty rough but its a tank… Will climb anything its pointed at. Its always been very dependable and never left me stranded. Also has a tow bar and the Glass is good. ”
Bruce has this parts’ chassis for sale.
“willys 1949 cj-3a rolling chassis frame. this is what is left from the parts we stripped for another restoration. frame was sanded in spots and POR15 applied. we have had very good luck with the condition of the parts we rendered from this “parts” jeep. please do not hesitate to make an offer for any “take-off” you might want. shipping can be arranged. may be seen by appointment. please email any questions, thanks.”
UPDATE: Price dropped to $2200.
(04/08/2013) This looks good. The dash looks earlier than 1956, yet this lacks the driver’s side gas filler.
“This is 1956 Willys jeep it has a 2.3 ford ranger motor in it everything else is original
This jeep runs and drives great has almost brand new 31x10x50 federal tires on 10 inch wheels. 4×4 works great.
It also has warn lockout hubs never been four wheeled also comes with a 6 foot snow blade
And another frame and front end and transmission. There ain’t many of these around. Call 606-305-7118 no emails”
UPDATE: Was $800. **SOLD**
Not much value, but there are some good parts.
“No motor. Has been sitting for a long time. Rough shape. $800 firm”
UPDATE: **SOLD** Was $9600.
“1951 Willys Jeep CJ3A. Fully restored, turn key, runs and drives like new. rebuilt original flathead 4 cylinder “go devil” motor. rebuilt original 3 speed transmission and transfer case. Complete restore and painted finished 3 years ago. Color is Willys “Pasture Green”. Would prefere to sell outright, but would concider trades for, 100hp tractor, Harley, Old car, or?..”
UPDATE: **SOLD** Was $2500.
(05/07/2013) I never thought I’d seen another pair of folding chair seats in a jeep. Here’s the last set we saw.
“1951 Willys CJ3A. Clear title. Runs and drives, but needs work like they all do. all original running gear. Don’t really want to sell it. would rather trade it for an old Ford pickup. 1969 or older. Must be a driver. No junk.”
This may have potential. It looks like it might not have moved in a while though.
“Excellent for restoration. Contact if interested 540-671-0205.”
UPDATE: **SOLD** Was $750.
Looks like a parts jeep.
“Jeep restoration project of a Jeep CJ3A – to the best of my research. Sold “as-is”. Can help deliver if within 100mi of Hinesburg. Please include the word “restoration” in the reply or your email will not be answered. Email any questions. Thanks.”
UPDATE: **SOLD** Was $3900
“Late 40s early 50s m38/ cj3a jeep. Very solid older repro tub. Runs great. Almost no rust at all. Rebuilt carb. Has about a two inch lift. Front seats are very good. Includes a complete pro winch that just needs drive shaft installed. Has a vintage kayline spare tire carrier. Has a mass title. Does not include rims and tires in the picture or the back seat. It will come with the original 16 inch rims and tires.”
This might be a good jeeping jeep.
“1952 CJ3a (from Washington State) with 289v8, headers, 3spd with warn Od, ps, locking hubs, 8k warn winch, tow bar, new top, roll bar, new bucket seats, 2 gas tanks, swing out spare, electric wipers, 10″brakes, recored radiator, titled.”
UPDATE: Was $8500. **SOLD**
Those are some large turn signals in the front. I can’t tell what’s on top of the windshield.
“1950 Willy’s Jeep CJ3A 4×4: Very hard to find with dual fueling sides: You can feul up either on the driver side or passenger side:
Color is Red with a white soft top, has full soft top doors, needs new window vinyl
Motor: Chevy 283 small block
Orignial running gears, transmission, and rear end
Has 4×4 high and low
Lots of mods have been done to the Jeep.
It was rebuilt in the 70’s, so it has impala red seats, tool box under back seat. This thing was built for the desert or the chocolate mountains.
Brand new off tires: 31 on old school jackmen rims
Runs and Drives: Needs a little brake work to finish project up. Over all great desert Jeep, you would be the talk of your Jeep Club driving this beauty around.”
UPDATE: Was $2500. **SOLD**
The seller described this as a MB in the title, but I don’t see anything MB here.
“1953 MB Willy’s Jeep. 225 V6 with 4 speed, needs to be restored from the ground up. Comes with hard top and doors. Ran when I parked it.”
UPDATE: **SOLD** Was $800
(09/23/2011) “1949 jeep body have hood , fenders, wind sheild frame asking 800.00 for its age it is in good condition but still needs work”
UPDATE: **SOLD** Was $2500.
“cj3a willys jeep 4cylinders hurricane engine runs and drives with winch. Newer tires fun little. Run around”
It runs and drives, but needs some body work.
“Selling my Willys cj3a jeep. Runs good brakes need work body is rusty. 4×4 works with high and low. Has been sitting for a while and now won’t go into 3rd gear. Motor fires rite up does not smoke. Have title. 402-841-1931”
Not much info provided.
“Call for info thanks 603 3257064”
Lots of mods on this rig.
“1949 Willys CJ3A this rig has a lot of work done to it. It has a Ford SB 302 CID V8, rebuilt carburetor, new starter and alternator, power steering, electric fan and fuel pump, points converted distributor, relocated oil filter, custom headers, Flowmaster mufflers. The drive line is setup very nice T90 3 speed transmition(new clutch), T18 transfer case, Warn Saturn overdrive so it has 12 forward and 4 reverse gears, New U joints, Dane 25 front axle, offset Dana 44 rear axle with a locker. New 35x 12.50 15 BF Goodwrench KM2 on black spoke steel wheels. It has been lifted with 2.5in Rancho leaf springs and a spring over conversion. New fuel cell and gages, 8000lbs winch, two fuel cans and mounts. I have a few extra parts that I just haven’t had the time to install yet. So as you can see this is a very capable trail rig. Just about all the custom work on this was done or redone correctly by me. Asking $3000 OBO. If you have any questions please ask.”
UPDATE: **SOLD** Was $1500
You never know when you’ll need to blend in with a heard of cows.
“This is a project jeep for someone, axles have been gone through, dana 25 & 41 with 5.38 gears. Has a 302 V8 kit installed, not running & no radiator. Tow bar come’s with it. The body is very straight but has floor board rot like all CJ’s. Willing to barter, I’m into ford hipo racing parts, small block or big block parts. Ansen older 8lug pattern 16.5×10 slots, 38 inch swampers-mudders. Some where around 1k. What cha got ?”
UPDATE: Still Available
(04/25/2013) This looks good, but I can’t if it is a 1948 CJ-2A or a 1949 CJ-3A. I’m guessing 3A.
“1948 WIllys CJ3A Jeep. Restored to original specs. Rebuilt original motor, transmission, carb, fuel pump and brakes. New wiring harness. 6 Volt electrical system. Painted Luzon Red with the correct stencils. Power take off 8,000# Konig winch. New military tires. This is a jeep that brings smiles to peoples’ faces! Clean California title.”
Ryan forwarded this. It’s not perfect, but there appears to be value here. The body has some crinkles.
“All body and interior parts of Willys 1947 CJ2A, including tub, tailgate, fenders, hood, grill, instruments, and seat frames.
All in fair original shape, with some rust that will need patching in floor, and threshold area (see pictures. Fenders, hood, and grill solid, but normal dings and dents. Never bondo-ed, never patched.
All parts sold together until 6/7/13, when I will part out separately if not sold as package.”
http://www.ksl.com/index.php?nid=218&ad=25451136&cat=&lpid=1&search=willys&ad_cid=10
UPDATE: **SOLD** Was $14,000.
Pascal spotted this jeep. Note the jeep-lamp above the garage door 🙂
“willys jeep cj3a 1949 refait au complet frame differentiel et roues peinture powder coating moteur refait complet body refait complet plancher neuf banc refait a neuf lames neuves shocks neuf electricité refait a neuf terminal soudé batterie neuve starter et générateur refait poulie de crank neuve boite de controle neuve monté original cj3a tout a été sandblasté et repaint le seul cj3a enregistré au québec plaqué pret a roulé inspection fait investi plus de 12.000$ et 3 ans de travail.evaluation pg 14,000$”
This a MB-like jeep built on a 3A chassis.
“This MB-3A jeep is a completely rebuilt CJ3A frame and running gear with one of our (D&L Bensinger’s) new, reproduction MB-2A body kits installed to make this look like a WWII jeep. It is perfect for parades and reenactments.
The jeep has a new wiring harness,12-volt system, used combat wheels and tires, new seat frames and cushions. Also includes top bows but no top. New spare tire with repro combat wheel included.
More pictures available upon request. ”