CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1950s CJ-3A Gaithersburg, MD **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE; **SOLD** Was $600.

Those appears to be the mudflaps hanging from the back.

“NO TITLE, Serial Number 88306, Drive train is fine (axels, trans, engine, brakes, transfer case) has PTO with no lever or propeller shaft. Good oil pressure. Set up to simulate an MB. 60+ year old Body is far from perfect. 8 inch wide wheels with dry-cracked tires. Good to run on a farm or for hunting and trail riding. Mud Flaps & Tow bar goes with. Must go soon. Advertised locally. Drive it on your trailer and get back home to have some fun. $600”

1950s_cj3a_gaitherburg

 
To Top

1951 CJ-3A Atlanta, Ga $13,500

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

Just one pic of this nice looking jeep.

“Total restoration of a Painted RED 1951 CJ3A Willys Jeep with correct seats, front and rear, covered with black vinyl. This Jeep has a rebuilt 4 cyclinder engine, transmission, 4-wheel drive, front and rear axles, locking hubs, rebuilt steering column, new steering wheel, new tires on the orginal rims. It also has new wiring harness, new springs front and rear with new shackles, new king pins, new gas tank, and a new exhaust system. Orginal type bumper hitch, new brake lines, shoes, master and wheel cylinders, brake drums turned, new orginal type tail lights, add on turn signals, all new rubber items around the windshield and gommets, orginal step plate for both sides. Orginal type oil filter and oil bath air cleaner, all new dash gauges, vacuum wiper. This Jeep has a 12 volts electrical system with alternator. Over 15,000 invested, not counting labor completed myself. This is a real eye catcher with a beautiful refinish. Its a real show car. Will sell for 13,500, contact me by email @ wrnew1937@bellsouth.net.”

http://atlanta.craigslist.org/nat/cto/1520506955.html

1951_cj3a_atlanta

 
To Top

3 Flat Fender Projects Wenatchee, Wa

• CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

There’s a variety of parts and projects here with prices that vary.

“1st jeep has the most potential and while the picture does not show it, it has a grille and other parts that can be put together to make a good one. It has rear diamond plate for the corners and diamond plate for the sides. It does have a windshield that needs put together. No seats or titles on any of them. It has saginaw front end which is optional I will keep it if you want to dicker. If you plan to install a bigger engine I will keep the engine and transmission and transfer case too. Engine is a L head than turns over by hand but someone got the carb and starter. It has a roll bar of sorts. Price depends on if you want the saginaw and engine. $300 with out all that. $650 with all that.

2nd jeep is a basket case and frames front has cracked totally off. But it has a round cross bar that can be used on the first jeep that some idiot cut off the original and put L iron to fit the saginaw on it. Or you can weld it back together and start a rebuild of a second jeep. it has axles but no power plant or transmission or transfer case. $150 for it.

The third is just a body and hood. It was a rare long body that someone cut down to a CJ3A size. Welds need to be finished on that part. Body could be used on one of the other two if you wanted. Might have another windshield in need of repair for it too. $200 for it.

As I said no titles but they can be gotten. I believe data tags are on one at least. I have extrea transfer cases that may need rebuild for $100. And some other extra parts for those that buy all three of them. Including axles. Have other small parts that I will make deal on if you buy all. I just need parts to finish my 2A. Might consider trading for things I need for the 2A like seats or guns or other old interesting item. Especially jeep PTO’s for the front and back or an overdrive. Or Jeepster parts from 48 and 49. I am keeping the roll cage for the 3A for now. But with the right offer will sell it too. It is one that is done well with sides that fit the contour of the CJ2 and 3A frame. $450. These are projects as you can see. And as I said I have hundreds of various small parts too for sale. And for the right trade or take all I will think about a better deal. Also have a F head that needs gone through. It used to turn over by hand but now doesn’t. has a regular oil filter system on it for spinning oil filters and upgraded carb. Long story. $250. Had it in a flat fender and it ran then.

http://wenatchee.craigslist.org/cto/1517486759.html

various_projects_wenatchee

 
To Top

1950 CJ-3A Brighton, CO **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000

It needs some wheels.  There looks to be some value here.  It’s an estate sale.

“Best offer for estate sale, Mileage: 31,572, 4 x 4, original 4 cylinder engine, Full hard top cap, original seats and high back seats, wheels, drums and brake hardware. All parts needed.”

1950_cj3a_brighton

 
To Top

1942 MB Ukiah, CA **SOLD**

• CATEGORIES: CJ-2A, CJ-3A, MB • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $7500

(11/23/09) I’m not sure what year we’ve got here.  It’s nice enough, and restored, though not to original.

“For Sale 1942 Jeep Willys Flat Fender. Completly Restored 4sp. 4×4.  $15,000”

1942_mb_cj3a_yreka

 
To Top

1951 CJ-3A Valley Springs, Az $5000

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

1951_cj3a_springvalleyUPDATE:  Price dropped to $5000.  The seller added a pic, which makes the jeep look nicer that the pic to the right.

“This vehicle has a new steering wheel box, brakes, altneator, fly wheel, remanufactured original flathead engine, leaf springs, new military tires, new seats custom upholstred, new primer and red paint. Runs great & restored.  I would like to get a truck. Thank you. contact email bmyers4h@commspeed.net or call 928-308-1411 ”

http://phoenix.craigslist.org/nph/cto/1510985609.html

1951_cj3a_springvalley2

 
To Top

1952 CJ-3A Parts? Selah, WA **SOLD**

• CATEGORIES: Body Parts, CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was No Price.

It sounds like the seller is parting out parts of this jeep?

“52 willys bodytub & hardtop $800.  Also selling flywheel, clutchdisk, presureplate, 4spdtranny & 18transfercase $400.  All together & working , will pull.”

1952_cj3a_selah

 
To Top

1949 CJ-3A Columbia, Mo **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

Obviously lots of updates to this jeep.  The body appears in great shape.

“For Sale: ’49 Willy’s CJ 3A, New body tub, Fenders, Windshield Frame, Tailgate, Chevy 4.3 V6 Fuel injected, Complete new painless wiring, new paint, new seats, gauges, completely undercoated, Dana 44’s, 488 gears, lockers Front/Rear, 350 automatic, completely rebuilt with shift kit, 38′ Swampers, new plus wheels. Placed 3rd in 2 cars shows.”

1949_cj3a_columbia

 
To Top

1952 CJ-3A Campobello, SC **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay

The truth in advertising here?  “1952 Willys Overland CJ-3A runs, drives, might stop.”  I can’t say I’ve ever seen a grille damaged quite like that.  Check out the gear shift in the third pic.  It’s also a mix of CJ-2A and 3A.

“Here’s the good: This vehicle runs well. -Starting is accomplished using the factory center foot pedal starter engagement. -The following have been replaced recently (last 4 months) -fuel tank, intake, exhaust manifold, intake valves, head gasket, spark plugs, points, condenser, master cylinder, filters, and oil. -the carburetor and fuel pump have been rebuilt recently. -starts, steers, shifts, rides fine.  doesn’t stop well right now. (wheel cylinders need rebuilding, i have the rear kits.) -transfer case works well and is twin stick case. (high/low and 2/4 wheel drive.)”

1952_cj3a_campobello2

1952_cj3a_campobello3

1952_cj3a_campobello1

 
To Top

1949 CJ-3A Jericho, Vt $4500

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $4000.

(08/12/09) This looks stock as far as I can see.

“1949 Willys Jeep CJ3A. Complete, all original. Includes top and doors. Refurbished: brakes, steering, wiring, engine. Maintained, and stored inside Contact: Rob Connelly (802) 899-1969”

http://burlington.craigslist.org/cto/1459451919.html

1949_cj3a_jericho2

 
To Top

1949 CJ-3A? Frenso, Ca $1500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

No pics and no description.

“PH 559-579-2288

http://fresno.craigslist.org/cto/1501199320.html

 
To Top

1951 CJ-3A Stainless Steel Bellevue, Wa $9,500

• CATEGORIES: CJ-3A, stainless/jewels • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE:  still available.

(10/01/09) Here’s a stainless jeep from Seattle’s Eastside.  I gotta say, that back seat might be the most comfortable looking back seat I’ve ever seen in the back of a jeep.

“1951 willy jeep all stainless steel not to many made like this very rare only a few was built this jeep is in perfect condition runs drive perfect a very expensive jeep its worth $20,000 is a buty must see in person I have the title and everything dont want to explain to much so call for $12,500 all questions 425-285-8012”

http://seattle.craigslist.org/see/cto/1466139255.html

1951_cj3a_stainless_bellevue1

1951_cj3a_stainless_bellevue2

Continue reading

 
To Top

1953 CJ-3A Pacific, WA **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $7100.

(09/06/09) It’s not completely stock, but not far from it.  What’s the metal underneath the front driver’s-side fender?

“1953 Willys CJ3a, all stock, not modified, runs and drives excellent. new gas tank, new rear seat and new 6 volt battery. Items for display at car shows go with it. no top. Painted inside and out, and underneath. Many new parts. Parade and car show ready. Licensed with 1953 plate, Every thing is done. No rust! Asking $7200.00.”

1953_cj3a_pacific

 
To Top

Year? CJ-3A Milford, CT **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

The price looks reasonable for a drivable flattie.  The body looks a little beat up and it appears there is a patch on the passenger side of the body.

“Runs great!!”

year_cj3a_milford

 
To Top

1950 CJ-3A Bulvedere, Tx $5500

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

Here’s an unusual arrangement of rear sitting.

“All bearings, brake parts and lines, steering linkage, wiring harness, gas tank and gas line, windshield and gasket, radiator, fuel pump, carbuator, water pump, alternator, hoses, all replaced with new parts. Electrical converted to 12 volt. Engine has oil filter cartridge system. All clutch parts new. This vehicle is a solid runner. It has 16 inch rims, which are not the original 15 inch rims. Tires are 7.50X16 and are probably 25 years old with tubes and have always held air. I have owned this jeep since 1987 and have done all of the work except rebuilding the engine, which was done professionally. Drives good, no shimmy. Floor starter. All guages replaced with new, however the gas guage needs to be replaced as it was burned out when the conversion to 12 volt was done. This jeep is ready to use.”

Learn more at Autotrader Classics

1950_cj3a_bulvedere1

1950_cj3a_bulvedere2

1950_cj3a_bulvedere3

 
To Top

1952 CJ-3A Rockford, IL **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500

Check out the length of those front shackles.

For sale is a 1952 Jeep Willys CJ 3A. Engine is a buick V-6. Lots of work done on engine gaskets etc. Rubbers are 31″ MTRS need to be replaced. 16″ Eagle Alloy rims.”

1952_cj3a_rockford2

 
To Top

CJ-3A Bodies Alameda, CA **SOLD**

• CATEGORIES: Body Parts, CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $800

Note the bottom blue tub.  It has the custom dash that I’ve seen on 5 or 6 or jeeps from California.  Also, it appears that it doesn’t have a driver’s side gas inlet as a part of the original design.  Anyone know anything about these bodies?

“I have 2 1940’s willy’s tubs the one in the photo the grey one on top has fenders hood tub and windshield frame – needs grill and tailgate and the blue one on the bottum is just a tub I am willing to sell them together or apart please call.”

 

2flatfender_bodies_alameda

 
To Top

1950 CJ-3A Seattle, WA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500.

This jeep has a variety of upgrades.

“1950 Willys CJ-3A, NO RUST, very solid all steel body on 79 DJ-5 frame, 231 Buick V6, Almunimum radiator, push fan, 400 turbo automatic transmission, Dana 20 transfer case, centered dana 44 limited slip flanged axle rear end. 3.73 gears, Dana 30 front end with new 11in brakes. Drives like a new Jeep. Full roll cage with padded top tubes, new steering wheel,tub is durolined. 33×12.50×15 tires with less than 1000 miles driven. 2″ receiver hitch on custom square tube rear bumper. gas tank under back. Levi Strauss edition front and rear CJ-5 seats. New turbo mufflers. All new wiring. Tilt wheel, saginaw power steering, new Rancho front lift springs and 5000 shocks. Bikini top only. Engine runs strong, cold starts and warms up fine, compression is good in all cylinders. (I do not know any mileage of car or engine).  This is one a CLEAN, V6 Automatic cj3a done right. zero rust and garaged.”

1950_cj3a_seattle1

1950_cj3a_seattle3

1950_cj3a_seattle5

1950_cj3a_seattle2

1950_cj3a_seattle4

 
To Top

1953? CJ-2A Burlington, IA **SOLD**

• CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay.

“VERY NICE! 1953 CJ 3A WILLYS. RESTORED BODY OFF-ALMOST-NUT & BOLT RESTORATION. 16,267 MILES. PRETTY MUCH EVERYTHING ON THIS JEEP HAS BEEN REPLACED WITH NEW OR REMAN PARTS. REMAN MOTOR. COMPLETE CLUTCH SHOCKS & SPRINGS. ALL NEW BRAKES & HYDRAULICS. RUST FREE ORIGINAL BODY. NEW WINDSHIELD ….”

1947_cj2a_burlington2

1947_cj2a_burlington1

1947_cj2a_burlington3

1947_cj2a_burlington4

1947_cj2a_burlington5

 
To Top

1942 GPW & CJ Flattie Selma, OR **SOLD**

• CATEGORIES: CJ-2A, CJ-3A, GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

I’m not sure if the price is a random number or if the seller will take $500 for both.

“1942 Ford GPW & Jeep CJ. Both for one money. No reasonable offer refused. NO TITLES. Being sold as parts donors. What you do from there is up to you. GPW has combat rims. CJ has overdrive. Both radiators missing. Drive train conditon is unknown. Email for phone number.”

1942_gpw_cj_selma

 
To Top

1957? CJ-3A Ottertail, Mn $1000

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $1000

This is missing a tranny and tc, but does have some later model running gear with 410 gears.  There might be some value here.

“1957 willys $1200 obo has 4.3 carberated setting in it, but no tranny or transfer case, and no interior. has good dana 44 in the rear and a dana 30 in front, 410 gears trust axles. please do not email it is not mine. call mike @ 218-731-2321 for any questions”

http://fargo.craigslist.org/cto/1487051729.html

1957_cj3a_ottertail

 
To Top

1949 CJ-3A Project & Parts Fort Campbell, Ky eBay

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

It’s a project.

“Up for auction is my 1949 Willys Jeep CJ3A. This is a project that I just don’t have time for, due to Deployments. This Jeep runs, the tranny shifts, and the 4 wheel drive works. I do give a guarantee. Just hook up some fuel and a battery this baby will start. I discarded the body because it was too far gone to repair. You can order the body and practically every part for this Jeep through companies like Kaiser Willys. I have purchased a new grill and steering wheel along with other misc. parts. The window frame is in OK shape and will need new glass, it’s flat and will be easy to replace. All this Jeep needs is to be sand blasted painted and ready for body. I will help in the shipping process, I would consider delivering within 250 miles of Fort Campbell KY for 1.00 per mile. I also have a V8 conversion kit for this Jeep if interested. Happy Bidding please e-mail or call me @ 910-309-1623 for questions.”

View all the pics on eBay

1949_cj3a_fortcampbell

 
To Top

Project Flattie with Aluminum Body Canton, Ga **SOLD**

• CATEGORIES: CJ-3A, Unusual • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4100

“New Aluminum CJ3A JEEP body on a new 1973 CJ5 powder coated frame. This frame allows the use of a V8 engine. Powder coated Dana 44 rear, Dana 30 front, and Dana 300 Transfer case, are geared for the new tires installed on the polished aluminum wheels. A complete new power disc brake system is still in the boxes. New parts include a new fuel cell, fuel line, wiring harness, body mounts and suspension parts. All the parts for this project cost over $17,000, not including the powder coating, windshield frame and original front grill. I don’t even want to think about how much was spent on powder coating parts. I will offer delivery within a reasonable distance. Call for a list of all the new parts included with this offer. May trade. Call me with what you have.”

aluminum_body_project_canton

 
To Top

1950 CJ-3A Lindenhurst, Ny **Status Unknown**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE:  New pics.  This was listed at $15,000. Status Unknown.

“Brand new body on 1986 CJ7 frame. Late model rear ends, transmission and transfer case. New 9000 lb. Ramsey Winch. New Best top seats and top with doors. New Roll Bar. New Tires. Needs nothing!!!!! SERIOUS INQUIRIES ONLY!!!!!Joe”

1950_cj3a_lindenhurst2

1950_cj3a_lindenhurst

 
To Top

1953 CJ-3A Parts Anza, Ca $250

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Sounds like you could make an offer and walk away with this stuff.

“I have a frame that is in great shape, and a tub that needs some TLC. The front axle is the Dana 25, and the Dana 41 is the rear axle. I have about $1200 in this and i am looking to move on. I am interested in some trades so let me know what youve got. I am specificly looking for R/c cars if i cant get cash. NO NITRO I am into crawlers and short course trucks. also wheels tires and jeep cherokee and wrangler stuff
HIT ME UP, MAKE OFFER! dont be shy i need to get this out if the yard.”

http://inlandempire.craigslist.org/pts/1479962414.html

1953_cj3a_parts_anza