UPDATE Price dropped to $650.
Not much value here.
https://harrisburg.craigslist.org/cto/d/carlisle-willys-jeep-1955/7019185827.html
“Willy’s Jeep 1955 Antique. Great rebuild project, non-running.”
UPDATE Price dropped to $650.
Not much value here.
https://harrisburg.craigslist.org/cto/d/carlisle-willys-jeep-1955/7019185827.html
“Willy’s Jeep 1955 Antique. Great rebuild project, non-running.”
UPDATE: **SOLD** Was $2000.
(10/17/2019) Has a pto winch. Body will need work.
“I have a CJ3a That actually runs. The body needs replacing. I put a few brake lines on it and got the brakes working. It has a cheesy electrical fuel pump currently but it will crank up run drive a stop. I haven’t cranked it up since july. The Pto winch has all the parts. This is a good project jeep that needs fully restoring. I do have a clean title.”
UPDATE: Status Unknown. Was $6500.
The seller has provided a very complete description. Includes an overdrive.
“I am selling my used driver quality Willys Jeep CJ-3A. This is a great “drive-it-like-it-is” rig. Starts, runs, drives, and stops exactly as it should; even the parking brake works (could use some adjustment though to hold on a hill…). It’s not perfect, won’t win any concours, but a solid driver. Most of the work you usually have to do when you drag home an old jeep has been done. It’s been driven on the road as well having seen off-roading adventures at the NH Trail Ride and Rausch Creek PA. Used but not abused as they say. Tough to find solid non-rotted originals like this in New England. I can be tough to get a hold of on the phone based on my work schedule so texts and emails are preferred.
The Saturn overdrive allows easy cruising speeds of 55 mph (or better?). The original 3A motor was pulled previously and replaced with a fresher MB motor out of a genset. Continue reading
Interesting oil filter bracket mounting idea. Perhaps it will hold up better than the stock setup, which sometimes cracks (I’ve had two of the stock ones crack).
https://sanantonio.craigslist.org/pts/d/pearsall-willys-jeep-cj2a-parts/7020701323.html
“Two parts jeeps. Will sell as a package or individual parts. Please inquire if you have questions about a specific part, chances are I have it.”
It may be a mix of 3A and M-38 parts.
https://portland.craigslist.org/clk/cto/d/camas-1947-jeep-willy/7019566348.html
“1947 Jeep Willy Project”
UPDATE: Price dropped to $9500.
(05/31/2019) This is a CJ-2A (or possible 3A) that’s had a CJ-3B body added to it.
https://spokane.craigslist.org/cto/d/carmen-high-hood-jeep/7020966810.html
“Ready for summer cruising or head to Moab-1949 cj2a converted to cj3b, the rare high hood.Fresh rebuilt 1967 225 dauntless V-6 with headers.tilt column,new (rebuilt mustang steering gear,warn over drive hydraulic clutch firewall mounted master cylinder,two tanks (one is new), full roll cage,almost new 31×9.50 15 super swamper tires new high capacity aluminum radiator new heater windshield electric wiper motors upholstery front and rear paint and carb. weather has not been nice enough for me to drive it yet after build -soon I hope. but it drove good and four wheel worked well before build”
UPDATE: **SOLD** Was $5000.
(10/11/2019) Looks like a great little jeep. It’s listed as a 2A, but may be a 3A. This was previously listed here.
“Willys CJ2A for sale. Powered by 1973 Ford Pinto 2.0L engine. Comes with 2 soft tops and doors, bikini top, 9500 lb winch. Engine and transmission overhauled. Great vehicle for driving the woods.”
UPDATE: **SOLD** Was $2700.
(10/06/2019) Body seems in at least decent shape.
“1950 Jeep Willys cj3 project”
UPDATE: **SOLD**
$2500 each or $4000 for both. The 3B has the passenger side vent, and no script on the hood, so it might be later 60s model. The ‘1945’ has rear floaters, but might be a 3A.
“Two (2) Willys Jeep projects, 1945 & 1954 both are complete less motors, these are barn find projects, Wife says I have too many projects and need to down size, asking $2,500.00 each or $4,000.00 as a package deal. May consider trade for a good welder.”
UPDATE: **SOLD** Was $3800.
Runs.
“Great project jeep: Owned for 44 years, this jeep used on dairy farm for 17 years and then put in storage. 4 cylinder, flathead engine, runs smooth. Has original old-school locking hubs. Needs brakes. A great project for street or off-road use.”
Looks in good shape.
https://www.facebook.com/marketplace/item/2059036877730828/
“1950 Jeep Willy’s for sale runs and drives great. Alot of recent work. New wiring rebuilt carb and fuel pump and much more! I also have 2 extra motors,tranny’s and t cases and 2 extra sets of axles that will go with it. I have a bunch of other parts also. Too many to list.”
Body is rough.
https://www.facebook.com/marketplace/item/958316141203835/
“1950 CJ3A. Willys is in need of a body and an oil bath filter assembly. Body is completely shot. Drive train is original and missing the front axle shafts. Part out possibly. Has title Will run with a battery”
UPDATE: **SOLD** Was $8750.
Runs and drives. Body has a couple patches.
“1949 Willys cj-3a jeep runs & drives great, has current registration, clear Az title. Mostly all original, has been converted to 12 volt, alternator charged, electronic ignition, new rims & tires, 20 yr owner, must see”
Body has at least one patch on the driver’s side.
https://www.facebook.com/marketplace/item/448068702419335/
“For sale 1953 Willys Jeep CJ 3A. Runs great lots of new parts including brakes distributor tires and wheels plugs wires starter seats gauges gas tank and much more. Rebuilt transmission Asking 6500.”
Looks like something has been added under the hood near the driver’s side headlight that keeps the hood from closing all the way.
https://www.facebook.com/marketplace/item/738563819941441/
“1949 CJ 3A jeep with top, heater, and new gas tank”
UPDATE: Still Available.
(03/12/2019) Has some mods, including the repro/custom fenders and steps.
https://www.facebook.com/marketplace/item/2317406665165617/
“1951 Jeep Willys CJ3A, Original, Runs and drives good. $3,200.”
UPDATE: **SOLD** Was $2200.
There might be value here. Probably needs some work.
“CJ3A Willys project. Has running Go Devil L134. New starter, points, coil. Needs radiator repaired. Great start for a flat fender classic. Clean title, can help with delivery if needed.”
Unusual hood scoop.
https://www.facebook.com/marketplace/item/932683607112599/
“V8 Corvette 1969 Engine, 4×4. Run and Drive.”
No pics provided.
https://kpr.craigslist.org/pts/d/benton-city-52-willys-cj2a-best-offer/7014115858.html
“52 willys cj2a lots of history with this jeep been dragging It around for almost 30 years body rough, frame in good shape out boarded springs w/lift only 3 buck shot mudders international 44 axles”
Jeeps runs, but needs brake work.
https://inlandempire.craigslist.org/cto/d/rancho-cucamonga-1949-willys-jeep/7012869097.html
“Hard to find 1949 Willys 4X4 Jeep With very hard to find original M38 aluminum Arctic enclosed top, good windows,original paint jeep has no bondo or old repairs nothing fizz caned or repaired it has dents and dings and scratches,the rear and tailgate are very solid all the front end pieces hood, fenders, fender wells. grill .firewall all are good no rust there is rest under fuel tank drive side, Has new OEM fuel tank, had the orig carb rebuilt new fuel pump and lines! Jeep starts right up doesn’t smoke goes in n out of gear and drives I have all the parts to go thru the brake system all parts go with jeep and I have spares,It has 90lbs of comp in all 4 cylls Fun project I can’t finish”
UPDATE: Still Available.
(09/13/2019) Needs some work.
https://inlandempire.craigslist.org/cto/d/anza-1953-cj3a-sand-jeep-ratrod-350/7011651375.html
“53 Cj 3a tub and frame. 350 , powerglide, needs some work. Ran when parked needs an intake manifold and carb to run. Aluminum radiator and an electric fan. Ford 9inch with spool. Tilt chevy column. Bucket seats. Fuel cell.
Cool project, tired of looking at it.
Make an offer.”
UPDATE: **SOLD** for $400.
It doesn’t run.
“1952 willy’s Jeep no title no key good parts truck. has motor transmission transfer case. Does not run.”
UPDATE: Price dropped to $4500
(06/12/2019) Could be a nice flattie. It has full floaters in the rear.
https://inlandempire.craigslist.org/cto/d/silverado-willy-jeep-1953/7009670430.html
“1953 willy jeep, v6, clean, clear title,.soft top, 3spd..in Norco Ca runs great.”
UPDATE: **SOLD** Was $4500.
(08/28/2019) Looks in good shape. Not sure what’s up with the top not fitting correctly. Maybe the rear bar wasn’t put into the proper place? No description provided.
UPDATE: Still Available.
(09/25/2019) There are a few odd things about this one. I wonder if it is sitting on a DJ-5 chassis?