UPDATE: Still Available.

(12/02/2018) Seller indicates the body is a 1947, but it looks more like a DJ body to me. This could be a modified DJ-3A.

https://www.facebook.com/marketplace/item/251727108857767

“Jeep Willys For Sale $7500 in Granbury Texas Buick V6 Dauntless 225, SM420, Dana 18 with Warn overdrive, Front Spicer 25 with disc brake conversion, Rear Dana 44, 5.38 gears, 32″ Goodyear MTR Kevlars, suspension seats. Vehicle is titled as 1960 Willys. The tub is a 47, windshield and front clip are CJ3A according to the previous owner. Please keep in mind this is an older Jeep/Willys. It runs great but they require TLC.”

UPDATE: **Status Unknown** Was $275.

(11/08/2018) Looks like a good price. Still has some hard-to-find parking brake parts.

“Willys DJ3A chassis, four lug wheels, two wheel drive, will also fit 1940’s thru late 50’s Willy’s cj2a, cj3a, and cj3b. Asking $275,”

UPDATE: Price dropped to $4500.

(07/06/2016) No obvious rust.

“1961 Willys Jeep 4 cylinder Willy’s motor 134 devil motor 3 speed on the floor 2wd runs and drives great this was a base Jeep for sale or trade $5500 obo”

https://www.facebook.com/marketplace/item/293519694835448

UPDATE: Still Available.

(11/06/2018) This DJ was converted to 4WD.

https://sandiego.craigslist.org/esd/cto/d/1957-willys-dj-3a-4×4-conversion/6769025334.html

“An east county San Diego Jeep since it was brand new. This is the “Dispatcher” model, that was originally sold as a 2wd.

This Jeep was professionally converted to 4wd with surplus military M38 parts by Border Parts in Spring Valley. Saginaw steering, Dana 25 front axle, Dana 44 rear, Dana 18 transfer case, and a T90 transmission with Borg Warner overdrive completes this rock-solid suspension and drivetrain conversion.

The engine is a 1964 Ford 260 cid V-8 out of a Fairlane. Engine routinely starts on first crank. A new ring gear on the flywheel, new starter and new clutch were recently installed by Action Cylinder Heads in Santee.
Continue reading →

Gayland shared this ad. It has no engine and the seller had begun converting it to 4WD. Looks to be 56337 10588 (I have DJ-3A #10538).

https://houston.craigslist.org/cto/d/1956-dj-3a-jeep-roller-no/6732338028.html

“For sale is a rust free 1956 DJ-3A. This vehicle was a barn find. I had the only rust spots repaired already. I am open to offers on this Jeep, their are many additional parts / extra parts that come with this jeep.

Frame is straight. I have slowly been buying new parts for this. I have a new front bumper and some other parts. The rims are correct for this jeep, the tires are just old tires to move it around.

I have the hood, windshield, fenders, grill, extra hubs, brakes, tire carrier, and most of the interior. No motor, tranny, or t-case but I know where you can get them in the area. Jeep was originally a 2wd. I have the correct axles to make this a 4wd.”

No pics provided. It’s a project.

https://seattle.craigslist.org/sno/cto/d/1965-jeep-project/6756379168.html

“This is a project I picked up earlier this year. It is titled as a 1965 DJ3A and shows 55K miles. I believe it was a hybrid built for the UN. The chassis and undercarriage is military with 4wd, pintle hitch and bumperettes. It has been modified with a Chevy 283 that starts and runs good. The body is enclosed like the mail jeeps but this was never a mail Jeep. It needs brakes on all four wheels. It was a driver at one point long ago but a previous owner started to change out the brakes and it was never finished. It has oversized wheels and tires to make it a roller. Wheels and tires could be easily sold. I am downsizing and need the room. A great fun project for someone.”

UPDATE: **SOLD** 

That’s a pretty stock DJ-3A.  It doesn’t run at the moment.

“1964 jeep dispatcher (willy) 4 cylinder 2 wheel drive. In very good condition. It has been stored for many years so not currently running. It would be a great project jeep. Message me to come look at it.”

Continue reading →

UPDATE: Price dropped to $1600.

(10/05/2018) This former DJ-3A Convertible has been modified with 4WD.

“For sale is a 1960 Willys DJ-3A jeep project with clean title. I have replaced the 2wd axles with narrow track axles from a CJ5 with front disc brakes. Has 33″ 285/70/17 BFG AT tires on brand new steel wheels. It does not have seats engine or trans. Basically a rolling tub. Floor pan was cut up by previous owner who had a ford straight 6 installed in it. I have accumulated a few parts to get it back on the road but I just have too many projects now. I have a CJ-2a parts jeep with hard top and doors, has the flat head L134 which runs but needs plug wires and a fuel pump. No title on the parts 2a parts jeep. I also have a T150/dana 20 combo that will be included along with the 2wd 3a axles. I want to sell as a package and will have both jeeps on a trailer this weekend (Oct 6-7 Cruisin the Coast) and can work out delivery if desired. I will get pics of the parts jeep this weekend. Please no calls after 9pm”

UPDATE: **SOLD** Was $8500.

(08/25/2018) “This very late edition DJ3A (2WD) Jeep came from Georgia. My regular, run around town, Driver Quality ride, Nicely restored, strictly stock, a tailgate model, three-on-the-tree, and I installed a newly rebuilt l-134 engine. Very dependable, 5 new NDT tires, and a real eye catcher. Has rear seat, beauty rings and “W” hubcaps. Built early Feb. 1964 makes this one of the last DJ3A’s, one of 58 built that month. NOTE: This Jeep is 2WD.”

Converted to 4WD. Has some cutlas hubs. Looks solid.

https://sandiego.craigslist.org/esd/cto/d/1957-willys-dj-3a-4×4/6713317222.html

“An east county San Diego Jeep since it was brand new. This is the “Dispatcher” model, that was sold as a 2wd. Converted to 4wd with surplus M38 parts. The engine is a solid 1964 Ford 260 cid V-8. Restoration of GPW requires sale of this Jeep. Thank you.”