UPDATE: **SOLD** Was on eBay.
This is rough, but it has both a PTO Winch and Newgren Hitch.
“You are bidding on a early model Jeep FC 150 parts truck that has a Newgren Company 3 pt. hitch. Model #BL 4770. The truck also has a Ramsey bed mounted PTO Winch set up with the pto and lever still installed, including chains to the sprockets. The truck had this rare combination installed when bought and was used on a farm. At one point the Jeep had motor trouble, and the truck was left sitting. The Newgren hitch is still installed and the truck would work great as a “library vehicle” to see how to install it onto your Willys CJ2A, CJ3, FC150, FC170 ,or CJ3B. The hitch is in rough condition, but the basic parts are there to use, refurbish, or use as a pattern. The original hydraulic ram and pump were were not installed on the truck when I purchased the Jeep. You can use a 12 volt pump and ram from Northern Tool, Grainger, etc. to power the hitch or look for an original. Some folks have also used the snow plow hydraulic pumps from Willys vehicles that are a little more common.
Please look at the photos carefully (the red cj2a is NOT INCLUDED!) You are getting a good starting point for an ultra rare 3 pt. hitch setup for a Willys Jeep. The condition is such that you will need to rebuild, refurbish, and add/replace parts. You also get a pto winch with the attachments to bed mount it, the pto attached to the transfer case and the control lever. The rest of the truck is included, but would only be good for some parts. The truck is rolling on its own and I can help load on a trailer.
To aid you with restoration, FARMJEEP>COM has an extensive write up on the restoration, installation, and additional parts sourcing of a very similar hitch. Please look at theses pictures closely. The condition requires work, but could add remendous value to your Willys or Jeep when installed and refurbished. Still has the original Newgren Comapny tag.”