Hard to tell much from the pics.
“Needs Repair. As is. Came with my 1954 CJ3B.”
Hard to tell much from the pics.
“Needs Repair. As is. Came with my 1954 CJ3B.”
I ran across this article yesterday. Some college students at the Ontario, Canada, college of Notre Dame plan to restore a 1943 Willys. The picture comes from the Welland Tribune’s online article.
http://www.wellandtribune.ca/2012/11/08/revved-up-about-the-past
UPDATE: Kudos to Greg Zyla for updating his column with the history corrections I suggested. You can read about it here: http://www.hamburgreporter.com/article/20121105/NEWS/121109944/-1/sports
(Published 10/30/2012)
I ran across this article about Jeep History: http://www.enterprisenews.com/lifestyle/columnists/x255960865/Greg-Zyla-Jeep-American-Bantam-and-Willys-Overland
If you read the article, you will see there are a few of the usual historical errors. I wrote a letter to the author with some thoughts on corrections. I’ve included them below to help those that aren’t as familiar with jeep history. I’ve also included them just in case I got something wrong.
1. The first jeep sold by Willys-Overland in 1945 to the public was the Willys CJ-2A. Very Early CJ-2A production units used some left over parts from the military versions, making VEC CJ-2As highly collectible among civilian jeep collectors.
2. The Willys Quad was the first prototype Willys-Overland developed in 1940 (the second Prototype was the Willys MA).
3. The Willys Quad wasn’t exactly a ‘copy’ of the Bantam BRC, although there were similarities, partly because Willys got to look at the Bantam plans before shipping the Quad.
4. Ford’s first Prototype was the Ford Pygmy. A second prototype was the Ford Budd (http://www.ewillys.com/2009/03/12/the-1940-buddy-a-ford-pygmybudd-prototype/ ). Their third prototype was the Ford GP (which doesn’t stand for General Purpose, but for G=Goverment and P=80″ Wheelbase). The WWII production jeep was the Ford GPW (the W standing for Willys Design).
5. Willys and Ford battled over the name Jeep. Willys didn’t win the right to use the name Jeep until the 1950s, which is the reason the hood and windshields of the CJ-2As and the CJ-3As were stamped Willys. There are a few rare CJ-2s that are stamped “JEEP” ( http://www.willys-overland.com/index.htm ).
6. While the original Bantam BRC is considered the first jeep, the jeep in the photo accompanying the article is a Bantam BRC-40 which was the third Prototype. (see the three different bantams here http://www.ewillys.com/2011/08/14/the-three-bantams-brc-brc-60-and-brc-40/ )
7. I am not aware that Bantam imported parts from England. I will have have to ask some friends about that.
8. Despite having arguably the worst of the three designs, Ford initially won the Army Quartermaster contract. However, there was enough push-back that the contract was transferred to Willys-Overland and Ford assigned as a second-source status.
NOTE: After reading this again, I probably should change the term prototype type to pilot for everything but the BRC, as the BRC was the real prototype/proof of concept, but that’s a little nit-picky for our purposes.
UPDATE: **SOLD** Was $800.
Walter spotted this CJ-2A. How about that unique rack on the front? Given that bumper, this was some kind of purpose-modified jeep. The body doesn’t appear too bad either. Maybe that rack was on a car truck?
“This is a 48′ Jeep Willys. This is a project that I wanted to restore myself but I just dont have enough time. It needs a full body restoration but it has its original drive traine. I do have have the title. Please no txts or emails.”
I’m taking the night off. More tomorrow.
Ann and I arrived safely in Pasco after a sunny/rainy/snowy/windy day driving through the panhandle of Idaho, then west to Pasco. We spotted and photographed a couple jeeps, ate some good food and visited with family; so it was a complete day!
More tomorrow on this possible CJ-2L Bruce spotted. Note rare Desert Dog PCV tires (not that they are in good shape). They have a tighter tread than the standard Desert Dog tires.
Yeah, I didn’t quite get to them last night.
Ann and I spent all of yesterday photographing a wedding, so I never got a chance to do updates. I’ll throw some up in a little while and regular updates will commence tomorrow.
– Dave
I got busy on other projects last night, so just a few posts today.
UPDATE: **SOLD** Was $8500.
This GPW will need some work. More pics on the ad.
“First registered in 1948 when auctioned by the D.O.D.and according to the VIN number, this Light Utility Vehicle is believed to be a 1942 WWII production Ford GPW “Jeep”.;Visit this web site for more information on the Ford GPW Jeep…http://www.kaiserwillys.com/about_willys_jeep_mb_history_specs. As can be seen in the pictures, this was a project started many years ago before the value as an historic vehicle was given consideration. The body has some Bondo here and there, but you’ll be hard pressed to find any rust or any damage to the body or frame. Unlike alot of other WWII Vehicles out there, with a moderate amount of effort, this particular WWII vehicle can be restored fairly easy. The engine and drive train are original to this chassis and have been reconditioned/rebuild and the only modifications are the Alternator, Air Cleaner and Oil Filter (All 3 original units come as spares). The only other mods are the front seats with the originals in the back, the gas tank, which is not connected, the front brakes are now disc type, the currently mounted steering wheel is a CalCustom unit, but the original steering wheel is also included. NEW Side Curtains and Top with bBows included and comes with a later 1963 Utility Trailer. Clean un-dated and signed title to both vehicles. The owner has passed away and I’m advertising the Jeep for the family located in Walnut, California who has Power of Attorney for any other legal docs you may desire. It is strongly believed the vehicle is drivable but you will have to bring tools, battery and gas to make sure, otherwise SOLD AS IS. Buyer must also arrange pick-up in Walnut, California. The family would also like the prospective buyers to understand that it is a hassle to accept a deposit, cancel this ad and then not have the sale go through, so please understand that the two vehicles are subject to 1st come, 1st served. That said, and after all is said and done, I can add that hopefully a little dickering between parties will make this a pleasant transaction; Feel free to contact me with questions.”
3Taps has pulled off the gloves. The company that produced one of the best national search mechanisms based on Craigslist data has filed a counter suit against Craigslist claiming the company’s behavior is anticompetitive. I can’t help but think that 3Taps has been angling for a fight with Craigslist since its inception. It have to know Craigslist would go after them, as it has been sending Cease and Desist letters to other sites for years. This results of this suit could resonate throughout secondary marketplace communities. For example, there were websites that combine eBay listings with other auction listings, providing a one stop auction site. eBay used Craiglist’s tactic of C/D letters to shut them down. So, the decision may define the meaning of ‘public information’ and may also decide if/when/where classified ads/auction ads constitute copyrightable material.
The CEO of 3Taps Greg Kidd says,
While we respect what craigslist has accomplished in the past in attaining dominance over online classified advertising, we object to them using that market power illegally to stifle innovation and hurt consumers. As craigslist spends heavily to bully and intimidate companies that challenge them, consumers are deprived of better ways to find and execute real-time exchange transactions.
UPDATE: Here’s an updated picture of the final deck in case anyone was interested. You can view more about the project here: http://www.deilers.com/deck/
However, I do have a couple quick updates on what we’ve been doing. Much of our time has been consumed by a deck rebuild for my parents (it turns out Ann is great with power tools!). Below are a couple shots. The first photo shows how bad it looked after we pulled up the decking. The second shows the deck partially done. There was quite a bit of rot in those joists.
This sounds like is has power and a good drive train ratio for the roads.
“This Jeep is in excellent condition ! The body is an original Arizona body. 350 Chevy motor with Corvette valve covers. Aluminum intake, small cam. 600 Holley carb and headers. 4 speed trans, Warn transfer case with over drive. 4:10 gear ratio front and rear. Aluminum wheels with 33 inch Super Swampers. Hard top is removable with a built in roll cage and a rack in the back for storage. Comes with a light bar you can mount on top with K/C lights and K/C lights mounted on the front bumper. $3800 O.B.O.
Call or text anytime – leave me a message if needed and I will get back with you 989-712-0588 Cody”
Reminder: Bob’s show is tomorrow.
“”It’s that time of year again! Announcing the 2012 Northern Ohio Flatfender Gathering and Cruise-in, Sunday, sept 23, 2012 from 11-4 at my home in Green, Ohio near the Akron/Canton Airport. Last year we had 35 jeeps…we hope to have 50 or more this year. Again, lunch and restroom facilities are provided. Please also feel free to bring parts to sell or trade.”
Yesterday Ann and I put down the power tools to take a quick trip to the Hiram Chittenden Locks in Seattle. I needed to scope out Discovery Park and the Locks for the upcoming book. Here are a few pics from the Locks.
Ann spotted this crazy Lego contraption. When I was a kid, I was excited to make a rolling vehicle. My how building with Legos has changed!
UPDATE: I got word back from my webhost that their data facility was having a problem and they would fix it asap. Since the server is now working again, they must have solved their problem. Updates will appear tomorrow early AM.
= Dave
This device was built to detect mines and, once detected, would auto-shift the jeep into neutral and put on the brakes. This article was published in the January 1946 edition of Popular Mechanics.
UPDATE: **SOLD** Was $3000.
Kevin let me know that the jeep has a complete Bobcat fiberglass body and is updated with a Pinto motor. The drivetrain is stock. He says it is nice. The seller is entertaining offers.
“flat fender glass body runs good pinto 2000cc engine runner driver”
UPDATE: Price dropped to $1800. This looks like a good price and includes a winch. Note the customized windshield, too. The seller did correct the V-6 to a Flathead 6.
(08/03/2012) It looks like the rear axle has been updated, so that part of the running gear isn’t original. The driver side entrance has been chopped a bit.
“1944 willys it has a flat head 6 motor,running gear is all orgianal,it has a big ass winch on it that works, runs and drives but needs to be restored…call 855-6091”
Anyone recognize this? The seller is unclear if this works with a jeep pto or not.
“Probably one of the rarest rear PTO attachments I have ever seen. This was believed to have come with a pile of F-12 parts. The small pto size shaft would lend itself towards Farmall, as would the distance from pto shaft to drawbar mount. Part numbers start with an unfamiliar C4CXXX. Numbers do include C4C299 C4C300 C4C303. It is also possible that one of the letters “C” could be a “G”.
Engage and disengage lever works fine.
So the question remains…Farmall, John Deere, Willys Jeep, Cletrac, Caterpillar, Avery or some other oddball.
We look forward to hearing from someone who knows what this truly fits.
We can be reached at 563-387-7705 should you have questions”
This looks good, but I’ve heard it needs a little work.
“1962 CJ3b Willys Jeep. 4 cylinder F head, 3 speed, 4 wheel drive with 2 speed
transfer case , lockout hubs, warn overdrive. Whitco soft top with doors,
rear seat. Runs, drives, stops good. Last of flat fenders.
$4250 715-561-4998.”
Here are some inexpensive plans.
“Full size plans/patterns to make an authentic looking Wooden model Willys jeep.
These plans comprise sixteen A4 pages and are drawn full size so can be used as patterns the finished model is 14″ long with 3″ diameter wheels.”
UPDATE: Status Unknown. Was priced at $2400
All three for $2400.
“I have 3 jeep willies for sale. One has been updated with chevy engine. the other two are orignal. Lots of spare parts go with them. willing to seperate or sell all together. The third jeep is a postal jeep 4×4 with left hand drive. Asking $2400 for all or best offer.”