All the jeeps appear to be projects.
https://www.facebook.com/marketplace/item/1098622237595829
“I have 4 46 cj2 jeep willeys and a lot of parts selling them parted or whole. Let me know what you want and we can make a deal”
All the jeeps appear to be projects.
https://www.facebook.com/marketplace/item/1098622237595829
“I have 4 46 cj2 jeep willeys and a lot of parts selling them parted or whole. Let me know what you want and we can make a deal”
This seller is hoping to sell his fathers jeeps and parts as one lot. The collection includes at least 2 running CJ-2As and an MB.
https://www.facebook.com/marketplace/item/653000325819554
“PLEASE read the entire listing.This is for the entire lot I am not interested in selling just one Jeep or one of anything else. Putting this out there to see how much interest I can find. My father is thinking about selling off his collection of Willys jeeps and all the parts he has accumulated over his 30+ years of putting these back together. His parts collection is vast and we are thinking to sell off the whole lot , which may include two running and driving 1946 cj2a’s. He has complete running gear, rolling chassis (2) , there is a V8 set up 289cid. With a Jeep T90 w/overdrive complete, he has a MB windshield and a top, but mostly his parts are CJ 2A. Let me know if you have any interest. I will be taking pictures and inventorying everything in the next couple weeks. price is not 100.00 marketplace will not list without something in that field”
UPDATE: **SOLD** Was $2750.
Ted’s got this Monroe 3-point hitch. He also has some housings and other pro parts.
“Up for sale or possible trade is a Willys Jeep Monroe Three Point Hitch or Hydraulic Lift Assembly. This is the last of a large collection of lifts that I’ve liquidated. This Monroe setup is in overall very decent condition for its age and mostly complete with the exception of the one small rear housing mount ( which I might be able to source by the time of a sale or trade) and the hydraulic lines which all guys usually have made new at any hydraulic line shop or even most Napa’s will make you new lines. All the other components of a Monroe lift are present including a few of the super hard parts to find like the original crank shaft driven pump and mount , center link and adjustment Plates.
I was lucky enough to find an original under body mount for these lifts and I had a few made from a Machinest friend of mine which will be included with all hardware to mount. Control Valve and tank assembly included as well as Monroe Lift housing with original ram ( all mounting tabs perfect) , leveling link, lift rods ,left and right lower lift arms, rear draw bar mounts etc. I will also include a copy of the master parts list for a Monroe lift Assembly and a link to an original Monroe operation and care Manual.
I have a few extra housings that may be available as well but no other extra small parts. Feel free to call or text with any questions or specific pic requests. I have sold four of these units recently all within the $2500-$3000 range depending on condition and completeness if lift.
Art is selling his parts collection. Below is a taste of what he has. If you are interested, contact him at art.carey @ gmail.com (remove spaces around the @) and he will send a complete list and a link to photos of most of the items. Serious inquiries only please. Price is for everything. Will NOT sell items separately. (Art didn’t include a location with his email, so I’m awaiting that info …).
“Price is for everything. Will NOT sell items separately.
I am selling my collection of jeep parts accumulated over the past 34 years, including several rare items, such as capstan winches and PTO gear. A partial description:
2 capstan winches with complete linkage and running gear and roller fairleads; 2 power takeoffs with intact drums; beautifully rebuilt engine still in its packing crate; engine block; 2 transmissions with levers; 4 transfer cases; 3 starter motors; 3 generators; 2 carburetors; 2 distributors; 4 cylinder heads; 5 Willys heaters, (one NOS, two restored with new cores);; 2 grills; 4 tailgates; 2 CJ-2A windshield frames; 1 CJ-3A windshield frame; driver-side front-seat frame; passenger-side front-seat frame; rear seat frame; 2 gas tanks;; 2 Sparton turn-signal switches; steering rods; steering-knuckle gasket set; bumpers; spare tire mount; several brake drums and brake shoes; several boxes filled with old and new miscellaneous jeep parts, including speedometers and many gauges, too numerous to list.”
No hardware, but the top looks in reasonable shape. Some window discoloration.
https://phoenix.craigslist.org/evl/pts/d/gilbert-willys-cj3a-soft-top/7434365551.html
“used soft top without hardware.”
Given the parts, there seems to be value here.
https://eugene.craigslist.org/pts/d/elmira-jeep-willys-project-parts/7421231768.html
“Jeep willys parts or rebuild. Plus alot more parts … new frame with added stiffener ..another whole parts willy and motors and trans. New leaf springs and painless wiring harness. Everything must go. 1k firm”
TJ shared this ad for the doors (hardtop not for sale) out of Everett, WA. The doors are priced at $50 on Facebook. I don’t recognize the doors or top. Does anyone else recognize it?
“These doors fit a hardtop like the one pictured. They contour to the jeep body nicely and are complete with glass. Unfortunately the top is not available.”
UPDATE: **SOLD** Was $500.
Door has some bruising.
“Top for 1949 Jeep CJ3A.
Includes doors, top, rear. 5 pieces in all. Windshield is not included nor is the vehicle.”
UPDATE: Still Available.
(07/06/2020) It’s a project with a variety of parts.
https://seattle.craigslist.org/tac/pts/d/south-prairie-1953-willys-cj3b-project/7427350635.html
“Tub, windshield frame, fenders, hood, fenders, tailgate, all stainless!
Chevy Dana 44 with flat top knuckles drilled and tapped for High steer arms, narrowed to 63.5″ wms to wms, 4:10 gear ratio !
Isuzu Rodeo Dana 44, 63″ wms to wms 4:10 gear ratio!
1973 DJ5 postal jeep frame, front winch bumper with Warn 8274! Power steering mount ready to go, Outboard mounts in the front and rear , YJ springs all the way around!
NP 435 4 speed transmission rebuilt with mated Dana 300 transfer case!
1948 Willys cj2a title with transferable collector plate!
Not in a hurry to sell, but if you want to take it over and make it your own, Now is the time to do so!
asking $7500, offers in person only!”
This piece of equipment will give your older jeep an old school feel.
https://slo.craigslist.org/pts/d/arroyo-grande-cargo-rack-for-willys-jeep/7410357338.html
“Cargo rack. Fits Willys jeeps. Well made hub welded on for spare tire”
Steve spotted this unusual item. I am unfamiliar with the block heaters. Is this a general item for a variety of engines (jeep and non jeep) or specific to the F-134s?
https://southjersey.craigslist.org/pts/d/clementon-willys-cj5-block-heater/7418486726.html
“Block heater that came out of a 1961 Willys CJ5 with the F134 Hurricane engine.”
It appears to be $600 for all. The white body looks to be a 3A. I can’t tell what the bottom body is. At least one frame is a 2A.
https://www.facebook.com/marketplace/item/467691317927429
“Two jeep tubs and 3 frames. No titles. Year unknown.”
Here’s a rebuilt DJ-3A tub with some non-DJ parts.
https://www.facebook.com/marketplace/item/274251058090113
“Have a restored 59 Jeep Willys tub Forsale no rust and in excellent condition. Also have a nice windshield frame with looks like new glass, rust free fenders,hood and grille. Located in Salt Lake City , Utah.”
UPDATE: **SOLD** Was $600.
Looks like it might clean up pretty well.
“Selling the cab off a 1966 CJ5. Let me know if you have any questions or want additional pictures.”
This sell also has some other parts for sale.
https://springfield.craigslist.org/pts/d/pittsburg-willys-jeep-1948-cj2a/7410712473.html
“The body on this old jeep is rough. It has no motor. I took the top off the transmission and the gears appear to be all good. The front end and rear end are there and appear to be okay. We have no title, but would make a great rat rod . The front fenders and the grill are good”
UPDATE: Price dropped to $150.
(11/18/2021) Looks like a good price. It looks like they were never mounted.
https://www.facebook.com/marketplace/item/1280919012427866
“Fiberglass fenders they are two of them”
Maury shared these hubs for sale. They are Allstate hubs and, likely, a very early set. My guess is the these were likely built by Husky/Dualmatic, but I am not familiar enough with hub innards to say for sure. I can’t quite find a brand-name hub with the cover that looks quite like this.
http://www.earlycj5.com/xf_cj5/index.php?threads/allstate-hubs.150116/#post-1696817
“These hubs are all complete and turn freely. The dial is heavy case aluminum. These only work with threaded axles ends. I tried putting them on the later snap ring style axle and the snap groove does not protrude out. Outer case was chrome originally. They seem like a really well built early twist lock hub. Asking $150 obo plus shipping. I also have a picture of how the innards went when I took them off the axle.”
Has some rust.
https://nashville.craigslist.org/pts/d/ethridge-jeep-cj5-meyer-hardtop/7396638853.html
“Jeep cj5 hardtop w doors. Came off of a 1963 willys jeep cj5
Should fit 1955-1970 something.
Has some rust on back corners. Drivers door has some rust on bottom. “
If your Meyer hardtop needs doors, here is a pair.
https://www.facebook.com/marketplace/item/894885104755220
“1955 Kaiser/Jeep cj5 doors driver and passenger side good glass not all rotted in great shape”
This custom top appears to be a shortened wagon roof possibly melded with a DJ-3A cowl windshield piece(?). Unfortunately, it does have some rust. But, someone did some good work on this.
https://columbus.craigslist.org/pts/d/lancaster-jeep-top/7408362188.html
“What appears to be top off vintage Willys Jeep.$800.00”
Andy shared this trencher for sale. Maybe someone can use the parts?
https://www.facebook.com/commerce/listing/867253230604701
“I need some help…. not sure what to do with this. It’s been in the back yard for probably 60years. Thanks”
Might be worth a look.
https://newjersey.craigslist.org/pts/d/sparta-jeep-mil-spec-winter-top/7402631469.html
“Off a 1951 M 38 Military Jeep. Will fit others. All Aluminum except front windshield frame. It had a canvas rear window panel, long gone.”
UPDATE: Status Unknown. Link is dead.
The seller has a variety of parts.
“Willys, CJ2A, CJ3A, CJ3B, CJ5, CJ6, jeep trucks, Utility Wagons and more.
I have lots of small used parts that came of of the vehicles listed above. Engines, transmissions, suspension parts, drivetrain parts. Interior parts, Some body parts.
Get a list gathered and email me you wanted items. I’ll let you know if we have them or not.”
Not sure how much value is here.
https://mendocino.craigslist.org/pts/d/willits-jeep-flat-fender/7392941779.html
“I have a fairly clean tub that the floor has been replaced with diamond plate, frame, hood, grill and fenders for sale. It’s missing the windshield.
No paperwork.”
UPDATE: **SOLD** Was $200.
Blaine spotted this Ford-302-to-T90 setup.
“Jeep aluminum bellhousing to adapt a Ford 302 engine to a Jeep T90 transmission kit, complete with #906203 main drive gear (long shaft 6 cylinder) with bearing, COAZ-7050 Ford bearing retainer and throwout bearing guide, throwout bearing and throwout bearing fork. The bellhousing has no cracks or dents and all threaded holes are in excellent condition. No damaged holes. Everything needed to mate a Ford 302 engine to a Jeep T90 transmission, except for the engine and transmission. This bellhousing is no longer manufactured. Very hard to find in even usable condition. Cash. Text or voicemail, please.”