UPDATE: **SOLD** Was $100.
This appears to be a ventilating windshield; the wiper setup on it is interesting.
“59 Willys jeep hood and window frame. Willing to sell together or separate. $100 or best offer.”
UPDATE: **SOLD** Was $100.
This appears to be a ventilating windshield; the wiper setup on it is interesting.
“59 Willys jeep hood and window frame. Willing to sell together or separate. $100 or best offer.”
Rear door lacks a window.
https://reno.craigslist.org/pts/d/tahoma-willys-hardtop-cj3b-hardtop-only/7199435632.html
“Full hardtop off CJ3B. Koenig all steel.
All windows intact except rear door.
Very straight…
Needs clean up, paint and felt in window runner channels.
Pictures are of top prior to removal.”
UPDATE: Price dropped to $150. This is also on Facebook: https://www.facebook.com/marketplace/item/1126941544324623/
“Will trade for cj2a drivers seat frame and rear bench seat frame Willys cj2a jeep top. I think it was made and sold by Sears. Pretty decent shape , includes doors. Does have some old repairs but sturdy .I’m only selling because I found another top.”
Needs work, but seems like a fair price.
https://goldcountry.craigslist.org/pts/d/twain-harte-1962-willys-jeep-fc-stahl/7187348241.html
“This just came off my 1962 Willys Jeep FC. Truck is NOT for sale. It could be installed on something else I suppose. It was installed On the Jeep at the Cleveland, Ohio Willys Overland Factory and the original owner drove it to Twain Harte the story goes. It is a neat piece. It is 9 feet long with the wheel well 71- 72 in on center from the front. It’s width is 74 1/2. It is44 in tall It has three big boxes per side with some rust in the bottom. I can’t remember seeing any rust through. It has a huge (32 in tall by 4 feet wide) covered compartment in the center with a sliding lid plus a tailgate. The rack is off of it and Unbolted in pieces. The rack can be thrown in. I don’t need to sell it just could use the space. I am firm in the price as I think it is fair.”
I’m not sure which half top this was. Maybe the doors are original to some hardtop, but the half-top itself is custom?
https://salem.craigslist.org/pts/d/salem-willys-cj2a-half-cab-top-doors/7186977401.html
“Vintage Willys CJ2A Half cab top & doors. This came with a project Willys & I will not be using it. Typical rust, doors have broken glass & will need some repairs. Cab is open in the back. Missing door hinges that bolt to the body. Not sure if this will fit older military versions, but for sure fits the 1945 1946 1947 1948 CJ2A.”
UPDATE: **SOLD**
This seller has a half and a full top for sale. He’s calling the white full top a Meyer hardtop, but it looks to be an aluminum Deluxe Sears top ($400). The other one is a sears half aluminum top ($325). Both of these tops appear in this vintage Sears ad from the CJ-3B page.
“Aluminum Willys jeep tops. These are 2A/3A tops. Both are in great shape. I decided to go another direction.
1. Meyers Industries full cab and doors. Glass is good in the top but it needs new glass for one of the doors. Rear hatch opens and handles are present. $325.00
2. Sears deluxe half cab and doors. It has been disassembled and stripped to bare aluminum. I have the hardware to put it back together. It has the side mirror, door handles, and working lock with keys. Windows are plexiglass and could use some cleanup but are usable. I do have the rear panel with window that’s not in the picture. It wasn’t needed to test fit the top. $400.00″
These are resold so infrequently that I don’t know what the value of these are.
https://harrisburg.craigslist.org/pts/d/quentin-cj2a-willys-top-bows/7177774675.html
“Here is a full set of late ’46 and up Cj2a original vintage top bows. They are in good condition and not imported reproductions. They must be picked up and cash only please.”
UPDATE: **SOLD** Was $1500.
Has some light rust, but appears solid.
“Full Meyer hard top from a Jeep 1966 CJ6.
Full metal hard top with full metal doors and hinges. Glass roll up windows in doors and glass windows in hard top
Some rust, some tweaks, small dents and bends. Mostly decent condition.
$1500. firm. See photos. Might consider partial trades. (Dual sport motorcycles or street legal dirt bikes, 4 strokes or modern 2 strokes…. boats? Firearms? Cj5 short cab top? Vehicles?)”
UPDATE: Still Available.
(06/19/2020) This seller has some miscellaneous NOS and reproduction MB parts.
https://nh.craigslist.org/pts/d/acton-willys-model-mb-jeep-wwii/7179438810.html
“I purchased a good amount of parts from a serious car collection for World War II era Willys Model MB Jeeps. Some parts are original and others are authentic reproductions. I have cataloged a good deal of it for quick responses. Please call/ text me with your needs. I have priced most items at 1/2 of catalog prices.”
UPDATE: **SOLD** Was $200.
(03/31/2020) Another M-38 Fording Kit for sale (one was just sold out of NY).
“Willys – Jeep M-38, Military Korean Jeep, new old stock ( NOS ); Very rare Deep water fording kit still in the original crate after all these years. I have just opened the original crate and Will Ship without crate for an additional $75.00 in the lower USA. The tail pipe is inside the intake tube still undisturbed. The outside of the intake tube is weather checked, as these creates are original and were unopened for al, these years. I Have only one left as I sold the other two. As mentioned I Will ship the contents of a open crates to the lower US States for an additional $75.00 but prefer local pick-up..”
UPDATE: **SOLD** Was $1400.
Might be some value here.
“Many Parts for a 1943 Willys Jeep.
$1500.00 OBO for everything.
Or – Call for list of parts and individual prices.
Original Tub, Hood,Windshields, Quarter Panel, Seat, Engine Block, Misc. Engine Parts.
Too Much to List.
Located in Oakley Area.”
UPDATE: Still Available.
(07/07/2020) This is a good price.
https://www.facebook.com/marketplace/item/3135841273198800/
“Jewel Jeep Stainless Steel body. Doors, Hood, Window Frame, Roll Bar, Spare Tire Carrier. Main tub is galvanized steel”
It probably ran when there were more parts, too. 🙂
https://www.facebook.com/marketplace/item/281415739914026/
“Cj3b. Ran when parked. Good windshield frame, hood, grill, and cowl. Make offer.”
UPDATE: **SOLD** Was $250.
Appears worth a look.
“Koenig hard 1/2 top CJ2A, CJ-3A, CJ 3B jeeps it came off a 65 CJ 5 . Model Number #535 It comes with both doors- see pics”
UPDATE: **SOLD** Was $300.
Unclear if all the parts are there.
“Willy’s snow plow 66 inches wide, NOT sure if all the parts are there I never had it on a jeep. I sold the jeep in the person did not want to plow. I have a ram single valve and belt driven pump from a fisher that I will include . And the picture of the plow is upside down too much junk around it and I’m not sure on the name of the plow it’s hard to read the writing”
Scott spotted these NOS Dualmatic hubs on eBay. I am not as familiar with the red stickers, but this looks to be a later version of these lever-activate hubs, solely based on the style of ribs.
View all the information on eBay
“NOS Dualmatic Locking Hubs Willys Jeep 10 Spline, Willys Mb, GPW, CJ2A Cj3a M38. New in the original box, I’m guessing from the 1950’s, or 1960’s. Some storage wear. All mounting bolts are there. Shipping $16”
UPDATE: **SOLD** Was $20.
Someone ought to be able to use this.
“Screen for an Army jeep. Do not know age or model but I would guess 1950’s.”
UPDATE: Price dropped to $235.
(07/31/2020) Top looks custom. Not sure how much value is here.The windshield looks nicely fabricated, in terms of strength, from afar.
https://minneapolis.craigslist.org/ank/pts/d/cumberland-willys-jeep-metal-top/7167261667.html
“1948 Willy’s CJ2A Metal top with doors and glass. “metal top only, willys not for sale” Very heavy metal. Top was custom made. Surface rust only. All metal is solid, only needs repainting. Trades or offers welcome.”
UPDATE: Still Available.
(04/23/2020) Looks like it’s in good condition.
https://www.facebook.com/marketplace/item/268584590804766/
“konig iron works half cab that came with my 1950 cj3a that i do not need its in pretty solid shape except for the bottom back wall but should be an easy fix im looking for 450 obo local pickup only”
Here are some rare parts for a Landrover IIA. Seller may also put them on eBay.
https://saltlakecity.craigslist.org/pts/d/victor-body-parts-from-67-landrover-iia/7159273421.html
“The frame and bulkhead on this rig are rusted out, so I have parted it out. I have a good set of pictures of most of the large parts.
I am offering the large body parts first. smaller parts will go after I have them sorted and cleaned up. If you need something specific, you can ask for it.
Given the size of the parts, I prefer if you pick them up. If I have to box and ship them, I will need to charge for that. I will probably also list many of these parts on eBay also. ”
UPDATE: **SOLD** was $3000.
Seller has an assortment of wagons, trucks and parts.
“You are basically looking at a willys junkyard. A collection of leftovers from years of having an addiction to Willys vehicles.
First a wagon with a small block ford and is the one deserving restoration.
Another wagon that is fairly complete but has suffered the ravages of time.
A truck that I just plain feel sorry for… not good to say the least.
Several extra 6 cylinder hurricane engines, couple of transmissions, doors,fenders,hoods,bumpers grilles, and boxes of lots of miscellaneous parts to numerous to mention.
ALL ALL ALL for sale for $3000.00 cash up front. (take it all… multiple trips ok!)
Might trade all for a decent running driving Jeep Comanche or maybe a complete Jeep CJ, or easy CJ project”
UPDATE: **SOLD** Was $500.
Marty spotted this combo.
“T18 transmission with wide radio/granny low. Includes adapter to Dana 20 transfer case. Bought it for my old Jeep but went a different direction. Never ran it, but it was reportedly rebuilt 30k mi ago. Probably at least needs a flush since it’s been sitting in my shop for 2 years now.
$500”
Are those all holes drilled in the back of the body?
https://phoenix.craigslist.org/evl/pts/d/mesa-willys-jeep-body-no-title/7171911257.html
“1941 1942 Willy’s Jeep Body no title wholesale only”
Looks in pretty good shape.
https://mohave.craigslist.org/pts/d/kingman-willys-cj2a-aluminum-top/7170418412.html
“Aluminum top, I believes it’s from Sears.”
It sounds like this is a homemade reproduction?
https://gulfport.craigslist.org/pts/d/picayune-m38-tub/7166067404.html
“Exact reproduction of a 1953 M38 Willys Jeep tub. Made with an original sitting next to it. Never used. $2000 a bit negotiable”