UPDATE: **SOLD** Was $500.
I’m not sure which hardtop this is.
“Hard top that fits 1950’s Jeeps (M38/38A-1, CJ5). In fair shape. Has suicide doors. Dropped price from $550 to $500.
CASH ONLY.”
UPDATE: **SOLD** Was $500.
I’m not sure which hardtop this is.
“Hard top that fits 1950’s Jeeps (M38/38A-1, CJ5). In fair shape. Has suicide doors. Dropped price from $550 to $500.
CASH ONLY.”
Given the dual pistons, this might be a Garwood model, but I couldn’t say for sure. Unclear what the value is or what it would take to restore it.
https://atlanta.craigslist.org/eat/pts/d/mansfield-willys-dump-bed-unit/7165964402.html
Original dump unit from a 1960 Willys Jeep. Complete unit with tank and pump. Could be used to turn virtually anything into a dump bed.
No pics provided.
https://fredericksburg.craigslist.org/pts/d/spotsylvania-willys-cj2a-parts/7158504902.html
“parting out a 48 2a.
including: T-90,T-18, D25, D41, go devil parts, block etc.generators, frame.
also like new cj3a windshield with glass.
fiber glass body tub in very good condition.
many other small parts.
will sell all or part.”
Price is negotiable (need restoration). KEMCO was the transition brand name between Beck and Kelly hardtops.
https://scranton.craigslist.org/pts/d/old-forge-willys-jeep-steel-cab-and/7171080061.html
“KEMCO all steel cab and doors for flat fender willys jeeps. This top is made by The Kelly Mfg. Co. The top will need to be restored and is sold as is. May be able to deliver for an additional fee. Price is negotiable.”
UPDATE: **SOLD** Was $500.
The top looks solid, but could use some cleaning and paint.
“Koenig top with doors from a 1956 Jeep CJ5. All there and in great condition. It has all the glass, only the drivers door glass is cracked. It’s real nice, not all rusty, came off a Colorado Jeep that has been sitting in a barn since 1977. Asking $500 complete. The top is still on the Jeep, it will be removed when I sell it.”
I think this is a Kelly hardtop for a CJ-5 that has a modified windshield that allows installation on a low-hood flat fender.
https://www.facebook.com/marketplace/item/3178479222206817/
“Custom hard top, doors and windshield frame for a Willy’s cj2 or cj3A or M38. Custom made with good glass, windshield wipers and rear window wiper, suicide doors and made well. Just need gone. Not going to use anymore!”
Lots of parts, but unclear just how much value is here. Has a Sears Deluxe Hardtop.
https://www.facebook.com/marketplace/item/637199820484975/
“1953 Jeep Cj3b · Suv · Driven 99,999 miles. 1953 Willys cj3b tub with fenders, with windshield with glass, F head 134 motor with starter and gen, trans, radiator, rolling chassis, new leaf springs new fender supports for front a tub support, seats including rear seat
Not sure of year but willys M 38 tub with left fender, L head 134 motor with starter and gen, trans, radiator, 2 windshields one I have glass and rubber, rolling chassis with good brakes excellent under carriage, Continue reading
UPDATE: **SOLD** Was on eBay.
Maury shared this Kelly hardtop for sale. It looks like it will need some metal work.
“Kelly All-Metal Cab For 1955 – 1975 Willys Jeep CJ-5. Condition is Used. All glass is good with no cracks. The top has surface rust. The doors have rusted through in places on the exterior panels. The door glass is not broken. I am not sure but I think this is a 200 series cab. It was made by Kelly Manufacturing Co. of Charleston, WV. This cab was on a 1959 CJ5. Local pickup only.”
Steve spotted this column shift for a VEC CJ-2A.
https://www.facebook.com/marketplace/item/263189188296778
“These are the parts most often missing on 1945 and 1946 CJ2A Willys Jeeps. They are in working order. Some assembly required 😉 I can ship if you need that.”
This looks like a backyard hardtop to me.
https://brainerd.craigslist.org/for/d/remer-willys-cj3-steel-cab-1955/7154166292.html
“Steel cab from 1955 CJ3b. Unknown make, no mfg tag. No doors.”
UPDATE: **SOLD** Was $450.
Looks like a good price.
“Willys Jeep steel hard top
Great condition!
Must go
450 obo”
UPDATE: **SOLD** Was $400.
Looks in good shape.
“Willys jeep cj3a steel half cab , 2 doors with roll up windows, decent shape .”
Includes the governor, too.
https://minneapolis.craigslist.org/csw/pts/d/watertown-rear-pto-complete-cj2a-willys/7160953560.html
“Rear PTO taken off 1947 CJ2A. Removed from vehicle in 2018 and was in good working condition, stored in heated shop. Front shift box, cover plate and boot, drive shaft, rear implement drive box. The governor was removed before I got the Willys because it was converted to an F-head engine by previous owner. It looks to be ok and spins freely. Would like to sell all together, $950 or best offer.”
UPDATE: **SOLD** Was $950.
(06/23/2020) Here’s a rare pairing. Somewhere I had an advertisement for Willys marine engines in a Florida newspaper from 1946, but I can’t find that ad at the moment.
“This unit has been in storage for a long time. The pistons are not stuck. Carburetor needs to be freed up and cleaned out. MB 564093 Marine Power Unit. 134 c.i.d.. This is a non running military engine that has been in storage. I see no cracks or breaks in the castings. I separated the engine and gear box so they could be mounted on my engine stands. After removing the oil pan and cylinder head and checking it out, I loosely assembled it just to keep things all together. The generator is a 6 volt, 40 amp. and the starter motor & bendix look good.
The “marine drive” gear box that was mounted on the engine has a multiple disc wet clutch with “knuckle in” engagement and by moving the lever in the other direction knuckles the clutch out, goes into neutral and will begin to apply a band brake as lever movement continues. Box is full of oil and looks good. The universal coupling behind the box is very heavy duty. The engine flywheel is drilled and tapped for a vehicle clutch assembly, but is still yet a clutch virgin. Starter gear shows very, very little wear. I will be happy to open things back up (engine and gear box) with a interested person present.”
UPDATE: Price dropped to $1650
(04/25/2020) The DJ-5 has the rear outboard springs. It may have a posi-traction rear. Given much fo the frame is boxed, this could be a good project frame.
https://www.facebook.com/marketplace/item/734396963994125/
“This is a like- new never installed Jeep CJ 3B tub and used DJ chassis.
The firewall is recessed to allow for a V-8 or different configuration than stock.
The tub and hood are made from galvanized material. The spot welds were covered to avoid oxidation.
The grille is an original one. I have no fenders or other parts.
The chassis is a Jeep DJ or 2 WD one, that is in very good condition, and is included.
Local delivery is negotiable.”
Gary’s got some jeep stuff for sale.
UPDATE: **SOLD** Was $375.
Seller will throw in the stand for $50.
“Have an early Willy’s Go Devil engine which turns freely, head bolts all turn nicely, no visible cracks but I have not had it scanned. Wilson Foundry W4 mold, cast number 838632. Serial number behind oil filter was grown down or never there, believe that is because the engine was overhauled at some point in its life. Not sure on that. It came as a package when I purchased my 46 CJ2A and I don’t need it. Toss in 50 bucks and you can have the stand. Hope the pictures add value. If the post is up, it is available. Cash only, pick up only.”
Jim at CJ5.com tells me he has a variety of vintage jeep parts for sale. He has much more than is listed within the categories on the website. I suggest calling him to learn if he has what you need.
UPDATE: **SOLD** Was $300.
Needs work.
“The body/tub of a 1948 Willys Jeep CJ-2A. Price is negotiable.”
Seller says to make an offer. $50 is listed on the ad as the price, but that might just be a placeholder.
https://bend.craigslist.org/pts/d/redmond-army-jeep-parts/7135926300.html
“I have a lot of left over parts from a 1952 M38A1 JEEP project.”
Gus has a variety of CJ-2A parts available.
https://jerseyshore.craigslist.org/atq/d/neptune-cj2a-parts/7157585087.html
COMING SOON
2 Orginal COOPER Radiator
1100 FOR ALL”
I’m not sure what is priced at $500 (each item, all items?)
https://www.facebook.com/marketplace/item/867070000463072/
“Jeep cj 2a bodies”
UPDATE: **SOLD** Was $500.
Seller will thrown in a second F-head for free.
“For sale 1952 Jeep Willys Engine, Manual transmission and two stick transfer case. Engine was running, it smoked a little bit, transmission and transfer was working fine. The electrical it’s already converted to 12 Volts. I’m asking 500.00 or best offer. Hablo Español. I can throw an extra identical engine for free.”
UPDATE: **SOLD** Was $350.
Galen’s got this PTO winch for sale.
“Koenig Model 100 PTO Winch for sale. $350 OBO. Winch, plate & cable, & chain drive, no other PTO pieces available. All parts move freely, winch is in good shape, just needs the PTO shaft and PTO transfer case. DM me to discuss delivery. Located in Northwest Arkansas.”