Here’s a great retro item for a stock rebuild that Andy and TJ spotted.
https://www.facebook.com/marketplace/item/723837016327566
“Vintage willys windshield washer kit, and pump”
Here’s a great retro item for a stock rebuild that Andy and TJ spotted.
https://www.facebook.com/marketplace/item/723837016327566
“Vintage willys windshield washer kit, and pump”
John spotted these parts for sale. Unclear if these are jeep only or various military vehicles.
https://www.facebook.com/marketplace/item/1261252374576443
“Old military new/old stock jeep truck parts wire harnesses, lights, carbs,canvas, racks, accessories so much to list come take a look make an offer there is alot”
Not sure how much value is here.
https://www.facebook.com/marketplace/item/369401052658616
“Lots of Jeep flat fender parts body’s frames axle’s transmissions all the stuff to run a Chevy 350 to stock trans and t case asking 4,000 obo for everything one clean title for the primer Jeep tub also open to trades”
There’s enough here that for the right person this might be a worth a look. What little we can see of the CJ-2A chassis suggests at least some of it might be restored.
https://www.facebook.com/commerce/listing/720351610298390
“Father’s recently passed and let a lot of older jeep parts there is a cj2 a frame we sand blasted and painted a Willy’s pickup up he has multiple titles would like to sell the lot together would make great projects 4,000 for every thing”
This “Good Roads Machinery Corp” snow plow was mounted to a CJ-2A. I’ve’ never heard of this model.
https://www.facebook.com/commerce/listing/7616751641689613
“Good Roads Machinery Corp snow plow. Removed from a 46 CJ2A I recently purchased. Manual hydraulic pump runs plow cylinder. Complete plow and mount. $500.00 obo located in Raton, NM”
Seems a good price.
https://www.facebook.com/marketplace/item/1726730411176522
“Good condition half cab for a Willys flat fender. Front looks straight across, so likely a fit for a 2A. It’s about plowing time and your old rig could use a cab. Keep yourself warm this year with a good top for a good price.”
Brian spotted this trove of jeeps.
https://www.facebook.com/marketplace/item/2546405835555556/
“Willys Jeep Pickers Dream. Variety of parts, frames, bodys, vehicles from 1940’s to 1960’s. Willing to sell all. From 12-20 vehicles. #CJ5 #CJ3B #CJ2A #M38A #MB”
John spotted this ad. It’s the first time I can remember seeing the name “Stamping Products” associated with this style of hardtop. “Pentagon” and “Metro” are the two more common names.
https://www.facebook.com/marketplace/item/954247996054127
“this is a hard top and doors for a cj2a or 3a it is all aluminum has both doors and 50% of the glass has factory style vacum style wipers and sliding side windows. it is strait and should fit right up. from what i hear its fairly rare. it is insulated and the insulation is coming out. make me an offer. i need money so if you want it shoot. the worst i can say is no”
TJ spotted these PTO parts. Seems worth a look for a the price.
https://www.facebook.com/marketplace/item/130832760087784
“Hydraulic power unit for CJ2A jeep. All parts are there. Worked fine when removed. It is a hydraulics for a snow plow and PTO for farm implements on the rear.”
The green one is $250, the brown one $200.
https://www.facebook.com/marketplace/item/3675384929447857
“Willys, Jeep- two (2) 265 lb. farm weights. Refer to pictures for casting quality. Brown- $250.00 (much better quality), Green- $200.00.”
Looks like a good price for all of that.
https://www.facebook.com/marketplace/item/2400505070145285
“Take off from Vintage CJ2A Jeep, PTO Unit and Auger Drill set up. Plus misc parts, In good condition but needs cleaning .”
John spotted this part. I don’t think I’ve seen a side panel shaped like that. Was it in 1975 or 1976 that the Jeep name was dropped so low on the cowl?
https://www.facebook.com/marketplace/item/764593441671685
“NOS Body Side from dealer, original AMC Jeep part. Located just off exit 27 of I-80. Many other Jeep CJ parts available.”
If this is home made, it is pretty well done.
https://www.facebook.com/marketplace/item/704689591822175
“Willys early Jeep home made light weight top no rear window top side is aluminum & sides are steel Britton Mi”
This could be worth a look.
https://www.facebook.com/marketplace/item/684434993900281
“Half cab vintage hardtop. Sitting on a 1965 but will fit others Price is OBO. Just the top for sale not the Jeep”
The two day’s s remaining, the high bid on this is currently $50. Thanks to Mark for sharing it.
https://hibid.com/lot/185245700/jeep-a-trench-6-trencher?ref=lot-list
Ted’s got some parts for sale. He’s got other PTO related parts for sale, too.
For sale are some various Willys Jeep Monroe Three Point Hitch Hydraulic Implement Lift parts. Pricing on the individual parts can be found further down in the listing. These are quite often the rarer or hardest parts to find of the complete Monroe hydraulic lift. These parts are high quality machined and fabricated parts from original Monroe parts I had. I had sold a collection of these Monroe lifts and was always having a hard time finding some of the tougher parts to locate to complete the lift set ups, so I finally decided to use a few of the original pieces I had as templates and replicate these rare parts. Prices quotes will include shipping costs within the states and all mounting bolts and hardware pictured for each part respectively. Below is a list and description of all the parts with pricing. There will be a number next to most of the parts which is the number used to show the parts in the original Monroe lift care and operation manual
#23 Back support bracket for main Housing. This bracket supports the lift Main Housing at rear of Jeep and is bolted to drawbar. Excellent machined part with correct mounting bolts and one hole threaded to be bolted from under Jeep to not interfere with rear PTO Gearbox when installed. Part is actually more rugged than the original cast piece
$150 shipped with mounting bolts and hardware
#9 Center or Top Link adjustment rack plates
These are the adjustment rack plates for top or upper link on the Hitch. These are high quality laser cut plates complete with mounting bolts and hardware to bolt them up to your center link
$75 shipped in the us
#22 Limit Chains Drawbar attachment bolts. These are machined attachment bolts used to hold the limit or anti sway chains to the Jeeps drawbar. Exact match to the originals
$75 shipped for a set of two in the States
#20 Drawbar Clevis or Knuckles. These are the drawbar mounted clevises or some people call them
knuckles that support the right and left hand lower links or arms. Exact fabricated copies of an original piece. Very rugged pieces , painted the Monroe Red
$225 for a set of two Clevises shipped within the states
Monroe main Housing under body support / brace with all mounting bolts and hardware and exhaust mounting angle and bolt
No manual part number on this last part as it’s not listing in manual. Quite possibly one of the rarer or hardest parts to find in a Monroe Three Point Hitch Assembly. I’ve had a bunch of these lifts and had yet to see an original brace. Seems there always discarded or left behind possibly when
Lift is removed from Jeep. I was lucky enough to borrow and original piece from a buddy and have it copied exactly to match the original. These supports or braces are used under the Jeep body to support and secure the Lifts Main Housing to the Jeep bed. Braces are complete with mounting bolts and all hardware
$185 shipped within the states
I included a picture of one of the under body Monroe Housing braces bolted to an original housing
To show how it would bolt up under jeep etc. Also pictured is the original brace or support I used as the template for the fabricated new braces
I will be adding one pic of the original care and operation Manual showing the part breakdown and numbers matching etc
Feel free to contact me with any questions etc. Also have a large collection of Willys Jeep Power Take Off related items and parts I’m selling as well.
Just had a few more sets of the rear draw bar anti sway chain bolts made and are available until gone. Also have a few Complete Willys Truck PTO setups available with Twinstick PTOs and rare two piece driveshaft setups to back of truck and rear pto gearbox output shafts
Ted 860-428-3265
Location Storrs CT prices in post
Other parts for sale: Continue reading
Looks like a lot of parts!
https://www.facebook.com/groups/880278299091751/permalink/1874870619632509
“Selling 10 to 12 pallets of NOS Mite parts. This is the remaining inventory from Surplus City. I have been sitting on this for several years and decided not to start another business. I have around 40K plus freight in the lot. I simply need it gone as I am selling the building. 20k for the lot. There are no pistons or jugs. There is half a pallet of NOS tailgates. Wire harnesses, propeller shafts, drive axle assemblys, Trans and tc gears, gasket sets, suspension bushings, there is really too much to list.”
Andy shared this ad, one that includes parts of an overdrive, condition unclear.
https://loz.craigslist.org/pts/d/eldon-1948-willys-jeep-parts/7705241770.html
“1948 Willys Jeep transmission, transfer case, shifter. Was all working when removed. Replaced with aftermarket.”
Thanks to John for sharing this one.
https://www.facebook.com/marketplace/item/3541019146150577/
“Jeep hard top, fits older cj5 l was told, have doors”
No doors.
https://www.facebook.com/marketplace/item/388518906845209
“Used Koenig hard top for 1950s Era Willys Jeep. Rough, but usable condition. No doors, no glass. Tough to see behind all the weeds, but it came off my ’56 Willys. I am only available to meet on weekends.”
My guess is that these doors fit a CJ-5 hardtop, but I’m not sure. I am sure I’ve seen this style before, but can’t place them.
https://www.facebook.com/marketplace/item/715419610481384
“Old doors for the willy. Not sure what model they are from”
It’s got slight damage, but maybe someone can use it?
https://sfbay.craigslist.org/eby/pts/d/diablo-cj-fiberglass-front-clip/7697111313.html
“One pc front clip for pre 1972 CJ-5. Grill fenders, hood all in one. Good shape not perfect , inner fenders included, comes with hardware to keep the fender tails tightly secured to the cowl. This is the quality thinkness for a driver jeep not the ultra thin racing version.
The new retail price for these is 850$ and that’s without the grill.
Also fits the cowl line of CJ-7, CJ-6 CJ-8 scrambler, willys, M38-A1, DJ-5, disbatch, postal, Jeepster Commando and wrangler YJ but some mods might be necessary install on these Jeeps”
John shared this solid looking Kelly top for a CJ-2A. I can’t make out the model number.
https://www.facebook.com/marketplace/item/859581951930550
“Kelly hardtop for jeep cj2a came off my 46 vec has been taken apart and stored inside for many years nò rot slight surface rust has all the windows doors tailgate glass complete and in great shape”
This is an unusual project. Maybe someone can use it?
https://www.facebook.com/marketplace/item/1352216505685910
“Project Jeep Body Aluminum Jeep CJ8 Body – modified to 4 door”
These are for a Meyere CJ-5 hardtop. Unclear how they fit on a CJ-2A.
https://www.facebook.com/marketplace/item/1404479823749053
“Came off a 2a that I parted years back,”