Seller has a range of smaller parts.

https://stlouis.craigslist.org/atq/d/saint-charles-willys-jeep/7007697619.html

“Dana 44 series IV TRAC-LOC Differential includes OEM NOS part to replace everything $200
OEM used Dana Spicer D25 R+P and case @ 5.38 ratio $100
OEM used Dana Spicer D30 R+P and case @ 3.73 ratio $100
OEM used D44 Open Case series IV 19 spline side gears $30
Dana 44 rear vented cover excellent condition (M38) $20
Dana 25 cover $5
1949 – 1971 CJ drag link includes OEM NOS ends $35
NOS TRW tie rod ends ES-140 have 3 available @ $25 each
TRE clamps qty 4 complete $10
Ross 15/16″ sector output seal new $5
4 New Bronze Leaf Spring Pivot Bushings $15
Late type 9″ Bendix brakes and drum take-offs / Comes with OEM NOS wheel cylinders $100 shipped
Dauntless 225 clutch fulcrum $10
Dauntless 225 release clutch bearing $15
Dauntless 225 flywheel bushings .670 or .75 I.D. $15 each
Dauntless 225 rocker shaft good used $20
OEM NOS Dauntless 225 Rotors for Delco Remy distributors $10 each
140′ of 1/4″ winch cable with hook (no frays nor kinks) $40
Good used Borg Warner T15 Mainshaft $50
Dana 20 transfer case shift lever poppet set $5
Muffler 2″ in and out $10
5 New Super Traxion 7.50 x 16″ tires $
Draw bar $75”

Franco spotted this custom Argentina-built intake manifold for a Tornado 230. The seller describes it as a head, but it looks to be an intake manifold.

https://www.hemmings.com/classifieds/partsforsale/jeep/unspecified/2326244.html

“Jeep 230 racing head,built 1970 in Argentina,complete with 3 Weber carbs,never used,built for the Tornado engine.$3000.00 419-461-3416 OH after 6 pm. ”

This rare head is currently available on eBay. It’s priced at $5000. Neat part, but I don’t see it selling at that price any time soon.

View all the information on eBay

“Up for sale is an ultra rare Kaiser/Willys Edmunds aluminum finned cylinder head for the 226 engine. You may not see another one of these, there aren’t many around. There also weren’t many performance parts produced for the 226 engine. I can’t say this is an NOS part, but it is very clean and appears to be unused. Being sold as is, but is in incredibly nice condition for its age.”

Maury shared this rare Capstan winch for sale. Note that the original lever to the side of the capstan winch has been moved and improvised. The data plate has beed removed. It does not appear to include a fairlead. Here’s an original example: https://www.thecj2apage.com/forums/capstan-winch-found_topic29322.html … the seller is accepting offers.

View all the information on eBay

This is a good price on a vintage tire carrier. Seller will not ship. It looks to be a Kayline.

https://lacrosse.craigslist.org/pts/d/blair-jeep-willys-or-cj5-rear-swing/7007799505.html

“Full roll cage came off a CJ5 but should fit any Jeep.
$200.00”

UPDATE: **SOLD**

Seller has some stuff for sale, including new rims and a late WWII head. Seller is also giving away an inner frame for a CJ-2A windshield.

1. Cj2a 2.2 engine head $150

2. Jeep Cj2a willys wheels set of 5 $350

UPDATE: **SOLD** Was $450.

Matt’s selling this complete plow setup.

“I have a complete Fisher Speedcast plow setup off of a 1969 CJ5 Jeep with a V6. It is a 4-way plow not just up and down. It should fit most CJ5s 1955-1970 and probably later ones as well with small modifications. It is complete with everything including pump, hoses, cable controls, plow frame/lift, and a 6’6” four way blade. The blade is in very good shape. It might need a couple new hoses but everything else is all there and ready to go. Asking $450 for everything. Call or text if interested. If the ad is still up it is still available.”

UPDATE: **SOLD**

Perhaps they are more common than I realized, but I rarely see hitches for sale.

“These are off of a 1949 Willys Jeep cj2 ( I think) Bumper, 2 trailer hitch and under motor skid plate”

This will fit a variety of engines, including f-heads and l-heads (based on the instructions).

View all the information on eBay

“NOS New SURE START Engine HEAD BOLT HEATER 110V Willys Jeep Hurricane GMC Case

NOTES/Particulars/Please read all:* This is a Vintage NOS (New Old Stock) Sure Start HEADBOLT HEATER. These were quite popular back in the day for older engines, for ease of start in cold weather. Your grandpa knew what he was doing, and these heaters work quite well when installed correctly. THIS HEAD BOLT HEATER IS FOR VINTAGE ENGINES USING 7/16-14 Head bolts. That is the head bolt shank is 7/16″ (.437”) in diameter X 14 THREADS PER INCH ONLY. ENGINE APPLICATION IS ON PHOTO #3. ALSO the instructions show what headbolt location to use with your engine.

Continue reading →

UPDATE: **SOLD** Was $100.

Looks like a good price for the right person.

“For sale is a Hunter Manufacturing 20K BTU Military Cab heater. It came equipped on a restored M38 I recently purchased, and I don’t really need heat in a topless Jeep. Working and in like NOS condition. Uses engine coolant to produce heat, electrical to run the blower fan – 2 speeds Hi/Low. Includes the switch, resistor and a small Douglas connector wiring harness. These were commonly used on M151 MUTTs but can also be used for 5 Tons, M37s, M38s, M38A1… anything with a 24V system. $100 Firm”