UPDATE: **SOLD**
Seller has some stuff for sale, including new rims and a late WWII head. Seller is also giving away an inner frame for a CJ-2A windshield.
1. Cj2a 2.2 engine head $150
UPDATE: **SOLD**
Seller has some stuff for sale, including new rims and a late WWII head. Seller is also giving away an inner frame for a CJ-2A windshield.
1. Cj2a 2.2 engine head $150
UPDATE: **SOLD** Was $1500.
Appears to include an NOS axle in a crate.
“Lots of 24V parts for an M38A1. Restoring my 1962 M38A1 and converted it to 12v and have lots of parts that I no longer need. Also many non-electrical parts as well. Starters, fuel pumps, generator w/regulator and harness, distributor w/ spark plug wires and plugs, gas heater for inside heat, rear axle housing and parts, headlights, radiator for M151, wiper motor, fuel tank, etc. Contact for complete list of items. All parts usable as far as I know. Items to be sold as one lot, as is. Will consider trade for M100/M416 trailer in good shape.”
Ken spotted these truck items. They aren’t too far from him, so if you need a trained eye to check the parts out, I’ll connect you with him. Ken owned a 4×4 ship in Boise for years.
I’m sure someone with a Kelly CJ-5 Hardtop could use these doors.
https://carbondale.craigslist.org/pts/d/eldorado-cj5-hard-doors/6979572694.html
“Pair of Willys Jeep early CJ5 hard top doors. Both have good glass but will need some cleaning up. Very rare”
UPDATE: **SOLD** Was $450.
Matt’s selling this complete plow setup.
“I have a complete Fisher Speedcast plow setup off of a 1969 CJ5 Jeep with a V6. It is a 4-way plow not just up and down. It should fit most CJ5s 1955-1970 and probably later ones as well with small modifications. It is complete with everything including pump, hoses, cable controls, plow frame/lift, and a 6’6” four way blade. The blade is in very good shape. It might need a couple new hoses but everything else is all there and ready to go. Asking $450 for everything. Call or text if interested. If the ad is still up it is still available.”
UPDATE: **SOLD**
Perhaps they are more common than I realized, but I rarely see hitches for sale.
“These are off of a 1949 Willys Jeep cj2 ( I think) Bumper, 2 trailer hitch and under motor skid plate”
UPDATE: **SOLD** Was $400.
Dave shared this PTO powered saw mill. It even includes a guard … almost looks safe!
“Older yankee pro portable sawmill”
Doors are a bit damaged.
https://syracuse.craigslist.org/pts/d/baldwinsville-cab-for-willys-jeep-cj2a/7002646709.html
“Complete cab for CJ2A. Yes some rust but all panels very solid. A tree fell on it so the bottom of the doors are a bit curled. Some glass broken – one door has unbroken glass. Has all original handles on both doors and rear window. Includes side closeout panels/door hinges. I acquired this for my early 60’s CJ5 but it is too short to fit.”
This will fit a variety of engines, including f-heads and l-heads (based on the instructions).
View all the information on eBay
“NOS New SURE START Engine HEAD BOLT HEATER 110V Willys Jeep Hurricane GMC Case
NOTES/Particulars/Please read all:* This is a Vintage NOS (New Old Stock) Sure Start HEADBOLT HEATER. These were quite popular back in the day for older engines, for ease of start in cold weather. Your grandpa knew what he was doing, and these heaters work quite well when installed correctly. THIS HEAD BOLT HEATER IS FOR VINTAGE ENGINES USING 7/16-14 Head bolts. That is the head bolt shank is 7/16″ (.437”) in diameter X 14 THREADS PER INCH ONLY. ENGINE APPLICATION IS ON PHOTO #3. ALSO the instructions show what headbolt location to use with your engine.
These appear in good shape. You can learn more about the Selectro history here.
View all the information on ebay
“I don’t know if Selectro made these for Sears? But the Selectro ones look like these. You don’t see many with the Sears name, I believe they are 19 spline. 3″ across bottom gear. Need cleaned up and greased.”
UPDATE: **SOLD** Was $450.
Maybe someone can use.
“Willys F-Head 4 cylinder 134 cubic inch engine. Runs good, no smoke. Crankshaft pulley was welded on at some point.”
UPDATE: **SOLD** Was $100.
Looks like a good price for the right person.
“For sale is a Hunter Manufacturing 20K BTU Military Cab heater. It came equipped on a restored M38 I recently purchased, and I don’t really need heat in a topless Jeep. Working and in like NOS condition. Uses engine coolant to produce heat, electrical to run the blower fan – 2 speeds Hi/Low. Includes the switch, resistor and a small Douglas connector wiring harness. These were commonly used on M151 MUTTs but can also be used for 5 Tons, M37s, M38s, M38A1… anything with a 24V system. $100 Firm”
I believe these are Koenig Standard Cab doors for a CJ-5/6 hardtop: https://www.cj3b.info/Photos/Hardtops/Koenig/KoenigFolder2.JPG
https://wichita.craigslist.org/pts/d/olmitz-early-jeep-cj-metal-doors-cj2a/6992779080.html
“Pair of doors for early Jeep CJ with metal top. Not sure what years? Doors are super solid with no rust through. Includes regulators & latches. $100 for the pair.”
Looks like a good price.
https://wichita.craigslist.org/pts/d/wichita-aluminum-hard-top-willys-cj2a/6992815703.html
“Very nice original vintage aluminum hard top. All glass is in one piece and not cracked. This came off this running 1948 cj2a very original jeep. Just in time for winter!”
UPDATE: **SOLD** Was $100.
This just might be a modified CJ-3B windshield that’s been modified upward to fit a CJ-3A. Chuck was telling me that he has seen these. If in fact that’s the case, it looks well done. If I were closer I’d get this for Biscuit.
“Willys Jeep windshield frame with glass. I believe it’s for a CJ3A or a CJ3A, not sure because it doesn’t have the vent below the glass.”
I’ve never heard of one of these. Perhaps someone could use it?
View all the information on eBay
“5-LB. RARELY SEEN, ALL ORIG. MOUNTING BRACKET FT-511 IS MADE OF O.D. PAINTED SOLID BRASS. ITEM 100% COMPLETE AND IN EXCELLENT WORKING ORDER CALIBRATING DIALS FULLY FUNCTIONAL ETC. . SHOWS NORMAL SIGNS OF USE / PAINT WEAR. SHOULD YOU HAVE NEED TO MOUNT A TELESCOPE / RANGE FINDER TO YOUR VINTAGE WW2 JEEP, THIS ONE IS FOR YOU. TRY TO FIND ANOTHER ? GOOD LUCK.”
Hard to beat this price if you need a later model CJ-5 roll cage.
https://www.facebook.com/marketplace/item/1306008189565137/
“Full roll bar cj5 jeep 1977”
UPDATE: **SOLD** Was $200.
Seems in good shape.
“Old pto weight from the Willy’s jeeps im sure it would fit anything looking for $200”
Still has plenty of good Buick 225 parts.
https://www.facebook.com/marketplace/item/2426329497444533/
“Frose up make and offer have a 4 speed trans that’s also frose up make and offer or trade for Willys parts”
UPDATE: **SOLD** Was $250.
Get this while it lasts.
“This is used with the power take-off at the back of the CJ2An or MJ2A 1946 Jeep. I hosted a belt which was used to run many different machines.”
UPDATE: **SOLD** Was $150. It appears to be an M-151 hardtop.
Here’s an odd hardtop. The strange part is the odd inlet (fuel inlet of some kind?) on the passenger door at a place that would be incorrect for a jeep.
“See pics. Glass broke on one side. Aluminum”
Someone was looking for this setup.
https://indianapolis.craigslist.org/pts/d/indianapolis-jeep-willys-rear-pto-unit/6982855282.html
“Complete Spicer rear PTO unit for Jeep or Willy’s. Very rare and all the bearings and seals are good. Model 18-H. Works perfectly, see below video for unit running (it’s turning backwards and looks like it’s running slow due to video frame rate when I recorded it)”
I believe the angle at the back of the hardtop indicates this is a Koenig hardtop and not a Kelly?
https://youngstown.craigslist.org/pts/d/salineville-willys-jeep-hard-top-plus/6982727717.html
“I have a hard top and snow plow off of a 1952 willys jeep. the plow has every thing except the lift pump .the top is in good condition with locking doors and back hatch. with good crank windows.”
UPDATE: **SOLD** Was $150.
Here’s a hard-to-find 4 bbl Offenhauser intake for the Buick 225.
“I have a 4bbl intake manifold for a Buick 225 V6.
Was being used on a motor that threw a rod.
Comes with intake and exhaust manifold gasket sets. Had a minor repair to heater hose connection but does not effect use.
Pretty hard to find these anymore, inexpensive power increase.”
UPDATE: **SOLD** Was $200.
Maybe someone can use this?
“Willys tub. Not sure of year. Rough. What you see is all I have. Floor rust.”