UPDATE: **SOLD** Was No Price.
Brian shared this one.
“What do you need, some or all,let’s deal have a couple trans to V8 bell housing adapters too”
UPDATE: **SOLD** Was No Price.
Brian shared this one.
“What do you need, some or all,let’s deal have a couple trans to V8 bell housing adapters too”
This looks like one of the Acme or Brian Chuchua tubs. It’s a light tub, but surprisingly sturdy.
https://easttexas.craigslist.org/pts/d/mineola-cj2a-jeep-willys-fiberglass/6902004779.html
“I bought this tub and no longer have the Jeep it was going on. It is brand new with no holes. It’s for a Willy’s CJ2A but you could use it on other models. Comes with a new fiberglass hood. Absolutely NO TRADES. Serious CASH offered considered but if you know anything about these you know a new one is at least $2,000.”
UPDATE: **SOLD** Was $400.
Looks like mostly surface rust.
Early CJ hardtop (was on a ‘55). Good condition, rear door glass cracked. Doors are good with good glass. Have an extra set of doors to choose from. If asking price is met, you can have both sets of doors.”
UPDATE: **SOLD** Was $500.
Someone need this?
“Up for sale is a Willy’s jeep pulley. It spins freely and looks to be complete”
UPDATE: **SOLD** Was $375.
“’46-’48 CJ-2A Willy Jeep Tub…Good for ‘Driver’ project, but kinda rough for a restoration…lot of un-needed sheet metal added by ‘Bubba’ (body fairly solid underneath)…$375. or swap for MB/GPW parts…Also have hood and fenders available.”
UPDATE: **SOLD** Was $400.
“I have a full aluminum top with doors built with .065″ gage and obviously hand built by a metal craftsman. Fits my 2A like a glove. I’ve included pictures of the top on the Jeep to show actual fit. Jeep is not for sale. I am in the Terre Haute Indiana area. I’m asking $400 but would consider a reasonable offer. I just want it to be useful to someone looking for a nice hardtop.”
Looks like a CJ-5 Hardtop to me. No doors.
https://billings.craigslist.org/pts/d/billings-jeep-willys-metal-hardtop/6897495668.html
“Not sure what all it fits. Got it with a bunch of other jeep parts I needed. It is in very very very nice shape. Roof, sides, and rear hinged lift gate with glass. No doors. $500.”
UPDATE: **SOLD** Was $500.
(11/09/2018) Christopher is looking to trade his Koenig CJ-5 hardtop for a 3B hardtop.”
“Vintage Koenig half top – sought after piece! All there just needs some metal fixed. Bought with the wrong model and I am looking to swap out for one that fits my cj3b willys. This top Fits early CJ-5.”
UPDATE: **SOLD** Was $500.
This Super Hurricane engine could be a good price.
“1962 Willys Wagon engine. Excellent condition.”
UPDATE: Still Available.
(03/28/2019) I be this wasn’t cheap to have custom made.
https://www.facebook.com/marketplace/item/657725864646108/
“Custom Aqualu CJ2A Body
– Tub – 4″ wider and 6″ longer than stock, 3″ of length added to door area, 3″ of length added to rear wheel area
– Grill – 4″ wider than stock
– Hood – 4″ wider, 3″ longer than stock
– Windshield Frame – 4″ wider than stock
– Front Fenders – 3″ longer than stock
– Storage Tailgate – 4” wider than stock
C
The body package was over $9k from Aqualu. “
Maury spotted these early Cutlas hubs on eBay. The seller owns “New Jersey’s largest Jeep parts depot”.
UPDATE: **SOLD** Was $175 ( I have it thanks to Chuck!).
This Bobcat Fiberglass hood looks in good shape. If it were closer, I’d snag it.
“jeep willys CJ (2,3) fiberglass hood asking 175.00”
Seller is selling both an OD and an OD adapter.
Maybe someone needs this?
https://seattle.craigslist.org/oly/pts/d/centralia-m38-jeep-gas-fired-heater/6891301490.html
“Gas fired heater for the M38 jeep. All I have is the heater and the duct. located in Centralia.”
Looks like a good price, especially for Alaska. No doors though.
https://anchorage.craigslist.org/pts/d/palmer-willys-jeep-top/6889886079.html
“Koenig Ironworks, Body Division, Houston Texas.
Original top for Willy’s MB, GPW.
No doors.”
UPDATE: **SOLD** Was $500.
I believe this is an early Koenig hardtop.
“Hard top and doors for a Willy’s/CJ5. I originally had got the top when it came with a ’73 CJ5 I had purchased, but since then it’s been replaced with a soft top and doors, so this has been sitting in my garage while I debated whether to sell it or not. I believe it was originally intended for older models (50s to 60s models), but it installed okay on the ’73
The doors come with the top. Windows are intact.”
Seller has other CJ-6 parts for sale, too.
https://galveston.craigslist.org/pts/d/houston-1957-cj6-willys-jeep-koenig/6870684126.html
“Early CJ6 Willys Jeep Koenig Ironworks Hardtop. The doors and outer roof skin have been media blasted. I have all of the hardware for the door sliding windows and sliding windows for the side panels. The rear hatch is missing, I never had it and dont know where it is. Seeing that it would basically be a flat piece of sheet metal with a top hinge it would probably be pretty easy to make one. The top is in reasonable condition, and I believe would only need some minor repair, new glass, and a rear hatch door to be 100%. I am asking $250 obo.”
UPDATE: **SOLD** Was $650.
Appears to need some glass
“Cj2a Willys Jeep hardtop talk about rare to find 650 or best offer. Also willing to trade for M37. Dodge Power Wagon parts”
It looks like this might fit a CJ-3B.
https://missoula.craigslist.org/bar/d/missoula-1940s-willys-jeep-topper/6888946130.html
“This topper came off a 1940’s or 1950’s Willys Jeep. We don’t have the windshield glass. We are asking $500 or trade.”
UPDATE: Sold. Was $675.
That’s to Steve for reminding me to post these Rapport dual wheel adapters. I’d forgotten.
“Dual wheel hubs for cj2a – 3a – 3b Willys Jeep. Comes complete with 1 set of right hand studs and 1 set of left hand studs. There are 2 chips out of the flange on one of the hubs but they do not interfere with its work ability( see the photo). Shipping will be the actual cost of shipping a 47# box to you location. If you have any questions text me a name and phone number and I will get back to you as quick as possible”
Here’s an odd item.
https://minneapolis.craigslist.org/ank/pts/d/shafer-pig-rack-for-early-willys-pickup/6867579098.html
“Pig rack for Willys pickup, been in storage for many years. Very unique item. Has sliding rear lift gate. Came off ’52 Willys that worked the stockyards down in St. Paul MN”
No pics provided.
https://lansing.craigslist.org/pts/d/wyandotte-cj2a-full-metal-top/6881744875.html
“Full Metal top with doors, came off a 1946 CJ2A, I think it is aluminum, it has a “Cyclone” emblem on the tailgate, it has driver side 6 Volt fan, and 6 Volt dome lights on both door posts. Glass has been replaced with plexiglass, metal is weather beaten but in fair condition.”
Unclear if seller will sell any parts at this point, but you never know.
https://kansascity.craigslist.org/pts/d/kansas-city-ford-gpw-willys-mb/6888087648.html
“I have an assortment of parts, engines, frames and accessories – enough to build two full wwII style jeeps. I also have a 1951 DK trailer, whole and complete, as well as a 1942 MB trailer in parts. Im looking to sell it all eventually, or one vehicle at a time. Im putting this ad out there to gauge interest. Not sure what Im asking just yet, and I can provide pictures as asked.”
No pics provided.
https://hartford.craigslist.org/pts/d/kensington-willys/6883071018.html
“1954 willys cj3b all aluminum cap very rare come and get it”
Gayland spotted this winch package.
View all the information on eBay
“Very rare Koenig crankshaft driven winch assembly for a Willy’s Jeep. I believe most of the parts are there, but I am not 100% this is complete. I can ship this but I would rather a local pickup contact me for shipping charges.”