emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
These appear in good reasonable shape. I wonder if they’ve ever been painted.
https://orangecounty.craigslist.org/pts/d/willys-jeep-cj3b-fiberglass/6645332263.html
“Fiberglass fenders for a CJ3b. Good condition. $150 each”
UPDATE: **SOLD** Was no price.
Joe-in-Mesa has this unusual Bellhousing and adapter combination. He’d like to find a good home for it, as he has no plans for installing a 260 Ford into his flat fenders.
“This bell housing is from a 1962 Ford Falcon 260 (V8) motor with 4 speed trans! I also have the clutch/bearing arm for the bell housing. That’s the same engine used just 2 years later in the Mustang and even early Cobras J. The bell housing is marked C2OA-6394 FoMoCo 62-1 (Jan ’62?) and Sheffield.”
Larry’s looking for some Cab Enclosure parts for his hardtop. he’s missing the the rear piece and the front flat windshield frame. If you have either part, contact him at loop_m@hotmail.com.
Price dropped to $600.
(07/07/2018) Includes at least one complete l-head.
https://modesto.craigslist.org/pts/d/old-willys-jeep-parts/6650600026.html
“I have a bunch of parts for an old Willys Jeep.”
Could be a good price.
https://slo.craigslist.org/pts/d/willys-jeep-soft-top/6650938772.html
“Soft top, 2 Doors. And framework. Fit early flat Fender Jeeps Willy’s”
Paul’s got these leftover parts available if anyone is interested in them.
“These came off a 53 cj3b. I believe the jeep had a boom set up, but do not know for sure. A heavy duty rear bumper and overload spring set up. A little rusty but somebody may be able to use them.”
![thumbnail_20180720_161641[1]](http://www.ewillys.com/wp-content/uploads2/2018/07/thumbnail_20180720_1616411.jpg)
![thumbnail_20180720_161658[1]](http://www.ewillys.com/wp-content/uploads2/2018/07/thumbnail_20180720_1616581.jpg)
![thumbnail_20180720_161732[1]](http://www.ewillys.com/wp-content/uploads2/2018/07/thumbnail_20180720_1617321.jpg)
Has a little rust.
https://indianapolis.craigslist.org/pts/d/jeep-cj2-steel-kelly-hard-top/6642463420.html
“Kelly All Steel Jeep hard top, Model F-23. Came off of a CJ2A, should fit CJ3 and early military Jeeps. All panels there. Some rust and dents / dings as you can see in the pics. Missing one of the rear side windows and both door windows and regulators. (these were standard replacement parts used on commercial vehicles and are available at Mill Van Supply and other places.) Have both front door latches but will need new locking handles. A little rough but would be easily repaired or restored. Must pick up on the west side of Indianapolis Indiana just off of 465 at 10th st. (The data sticker only has the F-23 part of the model number, Kelly has additional digits in their part numbers but didn’t always put them on the sticker.’
UPDATE: Status Unknown. Was $500.
The windshield has been sold.
“For Sale: Clean and complete CJ2A body tub. Not a lot of plastic, good solid tub worthy of metal work and your time.
Please voice call for an appointment to see it in person.
$500.00 CASH or CASH with trade(s) considered. Looking for clean, serial-numbered, functional, accurate, quality home protection devices.
The Jeep tub listed is located on our ranch between Salado and Holland, Texas 76571, about an hour South of Waco, TX.
*If you’re reading this add the tub you see pictured is still for sale. The split windshield frame has been sold.
**Please do not waste your time or mine calling me to ask if I will take less. I will accept trades, or trades with cash provided the trade value is in my favor.
***I have the capability to load you. Bring your trailer, donnage-bracing and straps. The jeep tub you see pictured will fit in the back of an 8′ pick up truck, but it will be difficult to unload. I would strongly recommend you bring a trailer.
Thank you”
UPDATE: The Chassis sold.
Tim’s got a variety of parts for sale.
For Sale:
1. A rolling Willys CJ2A chassis with L-head 4 cyl. (have not tried starting), needs alternator and starter, the rest of the motor looks pretty complete, springs very good, frame in good shape, rear crossmember in fair shape $600. Will include a CJ3A frame in very good shape for another $100. Bill of sales only, no reg. or titles available.
2. Miscellaneous Willys parts:
*brand new CJ3A grille
*NOS 24 volt military starter (M38/M38A1) still in the military can
*tailgate…no “Willys” stamp
*CJ5 grille
*dana 25 and dana 41 axles with springs
*starters, alternators, etc.
*air cleaners
*extra L-head motors (2)
*carbs
*M38 windshield with glass (side of windshield needs a little work, but certainly salvageable), also M38 hood (fair condition)
This is a partial list. Call and make an appointment to see any parts, I just might have what you need for your Willy’s jeep project! Pricing very fair.
UPDATE: **SOLD** was $400.
Jacob’s got this hardtop for sale.
“Vintage Koenig haalf top – sought after piece! All there just needs some glass replaced. Bought for a project and am going another direction. Fits early CJ-5.”
UPDATE: **SOLD** Was $80.
I believe these were used on the wagons.
“Little worse for wear, but are rare and can easily be refurbished and would make a great addition to any restoration project, $25 each or $80 for the set”
Looks in good shape.
https://detroit.craigslist.org/wyn/pts/d/willys-jeep-cj5-kelly-hard-top/6634086248.html
“This a rare all steel construction Kelly hard top designed to fit a CJ5. The has been restored and painted.”
Three free frames. Also, seller has body for sale for $100.
https://spokane.craigslist.org/pts/d/willys-cj2a-cj3a-jeep-frames/6637103339.html
“None of these frames have an associated title, and they will need work.
1947 CJ2A Frame – Coated in red frame primer. The front horns are pretty rough, bubba welding around the crosstube and around added pieces, but nothing a competent welder cant fix. Looks like it had a plow put on it at some point. Rear half is fairly solid with the stock draw bar and bumper.
1946 CJ2A Frame – Black paint. Ok shape with a decent custom front bumper and winchplate. A few repairs and cuts. Notably around the front springs rear pivot (pictured).
CJ3A Frame – Under the grey body (which is also for sale – $100). Great frame aside from a single bad patch of rust about 10 inches long just behind the front spring pivot. It was stored on its side up against a guys barn so it pooled water in that one spot. Otherwise its solid with little rust and no damage or repairs. The front bumper had been replaced by a welded-in tube then the center was cut out.
Half frame – Someone took a torch to this one and the front springs. It has a nice draw-bar on it.”
UPDATE: **SOLD** Was $450 total.
The Trailer is $250 and the plow is $200.
“6′ Scheneker Iron Works Plow with Monarch HY-LO Pump. Pump includes generator mounting bracket and control rod. Plow was used on a CJ-3A but will fit other models. Everything worked when it was removed. $200.
Bantam T3-C Trailer. Data plate is missing so exact year unknown but there were pretty much all made in the late ’40’s. Tub is rough but the rest is a great candidate for restoration or expedition trailer build. Original and rare Fulton coupler intact as is the original landing leg and one safety chain. I believe the Firestone tires could also be original. $250.”
Might have some value.
https://poconos.craigslist.org/pts/d/willys/6631680783.html
“For sale 1949 Willys engine,transmission, and transfer case with shifters and drive shafts. $450 obo. Cash only sale in person.”
No pics provided.
https://duluth.craigslist.org/pts/d/cj-6-soft-top/6619967763.html
“Hard to find Cj 6 soft top black with doors.”
May be of interest to someone?
https://kansascity.craigslist.org/pts/d/1963-jeep-willys-flat-head/6629957437.html
“We have a motor and transmission out of a 1963 Jeep FC 170. It is the flat head 6cyl. motor it ran when we pulled it out. the
Transmission is a three speed manual with the PTO take off and has the transfer case for four-wheel-drive
Jeep did drive when we got it
We are asking $700 or best offer
the last picures is of the jeep they came out of
jeep is not for sale”
UPDATE: I thought these might me a normal Allstate hub (as they are branded Allstate), but these might more likely be some Allstate branded variant of a Husky hub.
http://www.ewillys.com/2014/12/13/husky-hubs-for-sale/
I wonder which Willys Equipment piece was loaded on the back of this CJ-2A?
https://www.facebook.com/marketplace/item/171586296834310
“Selling axles from a Jeep cj2a. Price is each. If you know anything about these, feel free to contact me as I don’t know anything about these. Located in Inyokern”
UPDATE: Looks like these parts sold.
“I have many different items from 3 WWII Willys Army Jeeps. Items have the original stamps and other VIN numbers.
I have old pistons, grill, tailgate, wheels, gauges, etc.
Many parts are in mint condition and still usable! I’ll put “Excellent” as a condition even though it’s from one end of the spectrum to the other, just depending on what suits you”
UPDATE: **SOLD** Was $2200.
Tub has some rust, but doesn’t appear too bad.
“Package deal of CJ3B body parts just brought from out west!
Minimal rust, original steel!
Tub, fenders, windshield frame, tailgate, heater, seats, new Gas tank. Everything in the pictures!
Would make a great rat rod project.
No trades. ”
Appears worth a look.
https://columbiamo.craigslist.org/pts/d/willys-jeep-hardtop-doors/6616427202.html
“Steel hard top and doors for Willy’s Jeep cj-2a. $500”
UPDATE: Price dropped to $700.
Body looks in good shape.
“Have fiberglass flat fender tub. is in good shape. has pedal assembly. and all body parts. $900.00 obo”
https://www.facebook.com/marketplace/item/162711624570731
Is that a Warn OD shifter amongst the parts?
https://sandiego.craigslist.org/esd/cto/d/jeep-1947-cj2a/6623454461.html
“Dana 18 transfer cases. They are fine working condition. $100 ea
Early cj5 and willys Rancho 2.5″ lift springs, military wap and the shackles are included too $125
Clutch cable upgrade for the early cj and willys $40
Chevy V8 conversion motor mounts $35
Brake parts for the early Dana 44 rear.
Parking brake assembly for the early cj and willys”
UPDATE: **SOLD** Was $450.
Could be some value here.
“Willys jeep misc transmissions and transfer cases (not AMC or Chrysler)”
No pics provided.
https://orangecounty.craigslist.org/pts/d/willys-jeep-cj3b-cj5/6625216418.html
“1965 Parts are from a jeep I got in 1975 from a local nursery that used it for moving plants etc. around on the grounds. The jeep body was in pretty bad shape but it only had 19,000 miles on it. I put most of the under carriage parts on my 53 cj3b. Put another 15,000 miles or so on it and then it sat until now. These parts are in really good condition. I can send pictures of the ring and pinion teeth, super clean.
Set of front and rear leaf springs, stock from a 1965 cj5. excellent condition. They still have 2 of the original cast type shackles and 2 newer style. Not junk, they still have plenty of arch and are stiff. $100
1965 Dana 44 with the power lock and 4:27 gear ratio. It is apart because I was going to put in a posi and ended up using a different one. The ring and pinion have very little wear. Drum to drum $300
1965 Dana 27 with 4:27 gear ratio. Front end, drum to drum. $200
1953 CJ3B Some of these parts are interchangeable.
Emergency brake assembly, Complete. $100
Hand made diamond plate tailgate with spare tire carrier. $100
Body tub, pretty rusty, it has been cut up. I still have the all the parts. Quarter panels have been cut off, the bed has been cut out. The cowl is in pretty decent
shape. The tool box lid is in good shape. It would be good for a rat rod maybe. $50
Original 3b frame, pretty straight, its got some cracks and its been stripped of all the mounts. Sandblasted, no rust thru. $50
Pair of fiberglass front fenders. Really nice shape, never painted, never hit, still white gel coat. $450
Windshield frame, very good condition. $275
Radiator , stock cj3b. good shape. $125
NEW replacment rear crossmember bumper. Fits 48-64 CJ2A, 3A, 3B. Paid $130, sell for $80
Gas tank, 5 hole sending unit. Fits 46-64 CJ2a,3A,3B. No rust thru that I can see. $20
Gas tank, 6 hole sending unit. Fits 56-64 CJ3B. No rust thru that I can see. $20
Front Bumper. Heavy C channel. $25
For anybody that has a 2.0 PINTO motor in a CJ.
Header, for a pinto 2.0 in a cj3b. Custom made, aluminum coated, 1/2” thick flange, never loosens. Comes with a removable plate
so it can be run uncorked. $300
2.0 pinto engine. 1972 motor. Pan has never been opened up. I do have the head off, I was going to rebuild the motor. Stock bore, crank has never been ground. The head has a crane cam, springs etc. big valves, the head doesn’t have more than 15,000 miles on it. It still ran good when I parked it. It was starting to smoke some and the body was rusting out. $500
Edelbrock Pony Ram intake manifold with 2 holley 185cfm carbs. $150
Stock Pinto intake manifold with the holley/weber carb. $25
Pinto aluminum valve cover. Needs to be painted or powder coated. Eliminates the oil leaks! $25″