Bill spotted this good looking deal.
“Took off willys wagon with 20 transfer case 2 gear boxes winch with shaft drive”
Bill spotted this good looking deal.
“Took off willys wagon with 20 transfer case 2 gear boxes winch with shaft drive”
UPDATE: **Status Unknown** Was $300.
This blade one may be the same one that was depicted on a CJ-2A that appeared in a 1949 issue of Life Magazine. It certainly looks like the same model at the very least. The only difference I see is that on the blade below an additional plate has been added to the top.
Pics from Life Magazine:
Seller believes this to be home made, but it looks like a Sears Half top to me.
“home made aluminum hard top taken off of a 1946/1953 cj2
very well made, sliding windows”
https://losangeles.craigslist.org/ant/pts/d/willys-aluminum-hard-top/6402631388.html
No doors.
“Sears Allstate aluminum top from 1950s needs glass but all there ,no doors great way to cover your Cj2a Willys Jéep if stored outside,keeps snow out”
https://scranton.craigslist.org/pts/d/sears-allstate-aluminum/6394294335.html
UPDATE: **SOLD** Was $425.
May have some dents on the top rear.
“Hard top for Willys Jeep 42-52. Includes doors. Windows slide and back hatch opens easily. Good glass in back hatch. Missing glass in 1 slider window. Will sell doors separately for $125.”
Craig spotted this ad.
“Sears hard top for a CJ2A, may fit other models. Top is made of Aluminum. Good shape, no holes.”
https://rochester.craigslist.org/pts/d/willys-cj2a-hard-top/6392823620.html
UPDATE: **SOLD** was $200.
Looks like this one has been customized with larger windows.
“Cj2a jeep Willys half cab, comes with doors and steel top only, tub and frame not include.d was used on a farm it’s whole life minimizing the rust. Was removed off 46 cj2a.”
UPDATE: **SOLD** Was $300.
Has no doors. appears sound.
“aluminum half top off a 1953 cj3 has door mounts but no doors also comes with windshield”
UPDATE: **SOLD** Was $500.
It will need glass and door hinges.
“I have a Koenig Hardtop for CJ5 or M38A1.
I have both doors, complete.
It will need new glass.
The only thing missing that I can see are the portions of the door hinges that go on the jeep itself.”
Winter is coming.
“LOOK AT PICTURES AS IT COMES WITH ADDITIONAL BRACKETS FOR MOUNTING AND FOUR PUMP UNITS . CANNOT SAY HOW THE PUMPS WORK AS I HAVE NOT USED IT FOR YEARS. I WILL LOOK FOR A REBUILD KIT THAT I HAVE THAT INCLUDE ALL THE SEALS AND INTERNAL PIECES. PLEASE NOTE = FRONT BUMPER COUNTERWEIGHT IS _NOT_ INCLUDED !!!”
https://toledo.craigslist.org/pts/d/old-willys-jeep-meyers/6348101314.html
UPDATE: Don’s added another flasher to his list of parts.
NOS KAISER JEEP PART. KAISER JEEP CORP. PART # 936026-KIT. 4 -WAY FLASHER GROUP 35-59. ORIGINAL BOX WITH CONTENTS. NEVER USED/INSTALLED. BRAND FLARE STAT 105 Y 103. $350.
REAR TUX BUMPER BRACKETS. THEY HAVE BEEN BEAD CLEANED AND PRIMED RED OXIDE.. $135
N.O.S ., YANKEE 760 4 WAY FLASHER. ORIGINAL IN BOX. $120.
No pics provided.
https://racine.craigslist.org/pts/d/willys-jeep-parts-cj2a-cj3a/6747884777.html
“I have some Willys Jeep parts for sale from CJ2A, CJ3A and CJ3B
CJ2A/CJ3A:
-CJ2A Fold Out Windshield frame: Solid condition $300
-Fenders: $100 each
-T90A transmission (turns freely and shifts, otherwise unknown condition): $175
-D18 transfer case (turns freely and shifts, otherwise unknown condition): $150
-Other misc parts
CJ3B:
-CJ3B hood (no dents, minor surface rust): $250
-Rough CJ3B windshield frame: $50
-F-head 134 engine. Motor ran good, but has spun rod bearing. Selling as a core: $100
-Other misc parts
UPDATE: **SOLD** Was $500.
Seller indicates it turns and shifts fine.
“For sale $500.00 OBO. The PTO, driveshaft and gearbox, It was mounted on jeep CJ2a. The PTO will mount to any dana 18 transfer case. This jeep has been out of service for 30 years, (it was in a shop, covered with a tarp), I got it running, tested PTO the it shifts and turns fine.”
UPDATE: **SOLD** Was $450.
Appears worth a look.
“I believe this to be an early accessory or aftermarket aluminum hardtop setup for a Jeep CJ2A style jeep Willys. As found , will need lever work and new glass but not corroded”
Seller would prefer to sell locally.
“This is a set of Willys CJ2a Jeep original parts. Included is a grille, front fenders, windshield frame, and hood. Some wear but in very good used condition. Some wear on inside fenders and a few stress cracks.”
https://brainerd.craigslist.org/pts/d/1940s-willys-jeep-front-end/6349197317.html
The red Koenig full body hardtop looks complete, but the white half cab is a mix of a Kelly top (appears correct for a 2A) and Meyer doors (which are only designed to fit CJ-5s/6s/M-38A1s).
“47willys hard tops one short one long the long one was built by Koenig iron works Texas, no trades just cash”
https://kalispell.craigslist.org/cto/d/47-willys-jeep-hard-top/6372861426.html
UPDATE: **SOLD** Was $200.
(10/28/2017) Needs some work.
“I have what looks like a Meyers hardtop for a cj6. It has been disassembled and will need a full rebuild, but it is all there, including doors.”
Needs some glass. Seller also has Koenig PTO stuff for sale.
“The top is in good solid shape. It could use sand blasting and paint. The doors are complete and ready to install. It could use glass. Good straight and solid top. I also have a complete Koenig PTO winch, pto, and driveshafts for sale for $500.”
https://jackson.craigslist.org/pts/d/willys-cj3a-or-cj3b-full-hard/6376505145.html
UPDATE: **SOLD** Was $150.
Bill spotted this. Maybe it can be freed up?
“I have a 1950’s Willy’s Jeep Koenig Twin Stick Model 40 PTO, ID number WO48-202, WO48-201. It’s completely froze up. However appears to be complete. $150 firm.”
Bill spotted this deal.
“Took off willys wagon with 20 transfer case 2 gear boxes winch with shaft drive”
UPDATE: **SOLD** Was $250.
Might be worth a look.
“Top in good shape with doors and the hinges.
Needs a couple pieces of glass.”
Seller has a variety of parts.
https://spokane.craigslist.org/pts/d/many-willys-cj2a-parts/6370319571.html
“I have a few Jeep parts from my collection that I’ve decided to sell. I’d keep them, but I don’t have enough space to store everything and I need cash to finish my shop. I’ll do my best to keep the list current, and I may add more as well. Take your pick:
Original Early CJ2A Windsheild: $300 – in good shape with inner frame. Inner frame is rusted out in a few spots but the outer frame is solid.
Reproduction Tailgate (no stamping): $100 – almost like new, paint is faded
Early CJ2A Body & Front Clip – 1946: $400 – floor pans are gone, covered with flat plate. Underside in general is rough. Has a few holes cut in it, needs a good restoration. Hood and grill are fairly straight, fenders need some repairs around the supports.
Dana 27 & 41 axles: $300 a pair
Continue reading
Needs work.
“I have a willys body that needs work
I have been working on it and just decided to buy a new one don’t have the time to mess with repairing it
will come with extra parts to repair it”
https://portland.craigslist.org/mlt/pts/d/gpw-willys-jeep-body/6372573098.html
UPDATE: **SOLD** Was $1000.
(09/13/2017) Craig shared this one. Seller is including a snow plow and front counter weight as well. Looks like a good price.
“1957 Jeep A Trench trencher,snow plow and front counter weight. Will sell all together or separately”
Galen’s looking to sell this pan.
“For Sale & Offering FREE DELIVERY in the Northwest Arkansas/Southwest Missouri/Northeast Oklahoma area!
$750 OBO
New Omix-ADA 12007.04 Replacement Front Floor Panel with removable Transmission center cover.
Fits 1952-1971 M38A1, 1955-1969 CJ5, 1955-1969 CJ6 (does not fit 1970-1975 CJ5 Rear Gas Fill Tubs)”
https://fayar.craigslist.org/pts/d/jeep-replacement-floor-pan/6368202514.html