These look like a good price. Seller notes they are for a 1966 wagon.
“new firewall and one floor tin also bottom hinge for rear hach made by hanson still in tube cash talks so dose trade”
These look like a good price. Seller notes they are for a 1966 wagon.
“new firewall and one floor tin also bottom hinge for rear hach made by hanson still in tube cash talks so dose trade”
I spotted this Ad for DJ-5 parts in Duncanville, Texas. I know some folks are looking for them.
“I have several Postal Jeep parts new and used. e mail me for parts needed. This is for parts only, no jeeps for sale. ”
Steve’s got this set of cool vintage floor mats for sale that were from JC Whitney. Looks like it would fit a CJ-5.
“Genuine antique JC Whitney still in the original box floor mats. One for the front of the cj and one for the back, both have the word Jeep on them. These are back in the days rubber was rubber. The front appears to be formed with Whitney craftsmanship to fit over the sensual hump on the floor board that many admire but won’t admit in public.
You aren’t going to find these rare accessories anywhere else.
Did I say rare genuine antique JC Whitney floor mats?”
UPDATE: **SOLD** Was $200.
Looks like a good price. Appears to be a Sears top.
“Half Cab with doors and inserts. This fits a CJ2A or CJ3A.”
UPDATE: **SOLD** Was $100.
Looks like a good price and appears to have the original instructions.
“cab off of 1957 willys cj-5 cab and two doors”
Looks like a good price on a hardtop.
“Hardtop for a Jeepster commando
Fits all years
Good condition”
http://phoenix.craigslist.org/nph/pts/5582062544.html
UPDATE **SOLD** Was $350.
Looks like a good price. It’s a Sears Deluxe hardtop.
“hard top and doors was on 1948 willys cj2a.”
UPDATE: **SOLD** Was $200.
Looks like an early Koenig hardtop.
“1946 cj2a hard top.
Only selling the hard top – sorry.
4 side windows slide – do not roll
rear window fixed.
doors on piano hinges
back door opens”
UPDATE: **SOLD** Was $425.
Has some light rust.
“I have a steel hard top from a 65 willys jeep in good condition have doors also in good condition windows work and all handles are there”
UPDATE: **SOLD** Was $200.
“For Sale: A pair of early Willys CJ5 seats. These seats are original (as far as I can tell) and came from a late 1950’s era CJ5. They are in very good, but not mint, condition. Please see the up close pictures for a few imperfections. The back of the passenger seat has a dark mark/line on it, but this is not a hole or cut. Please no texts, calls or emails only.”
UPDATE: **SOLD** Was listed at $250.
May be a good price.
“m38 top ?Top has passenger side glass cracked other two good. Passenger door glass cracked other piece plexiglass ,Drivers door both pieces Plexiglas I think. Both windows slide As should .Dont know what its worth Make offer .made out of aluminum.has tag on door see pictures”
UPDATE: **SOLD** Was $550.
(04/16/2016) Great price on a good looking hardtop.
“Willys Jeep Top, This is a Willys Top, The plus to this top is that I have EVERY PIECE, all the nuts, bolts, and screws. I took this top off my 1962 CJ5 over ten years ago. I still own the Jeep it came off of. So you can see how it mounts.”
UPDATE: **SOLD** Was $400.
Might be a good price.
“Original top for the m170 jeep. Contact by phone for more info”
UPDATE: The Jeep & Extras are **SOLD**
“There’s a Newgren Single Bottom Plow,
a Roper Post Hole Digger,
Rear PTO w/ Pulley,
Several Governors to choose,
Front Counterweight,
Koenig and Ramsey Winches,
and almost every printed word Willys ever did about odd ball accessories.
What trades would BLOW MY DRESS UP?? A DJ3A to replace my wrecked Miss Willy, An Aero Willys driver, A Nash, A Hudson, A Studebaker or who knows?? Anything left after this Farm Jeep Project goes will be available then. I’m also going to The Willys Jeep Rally on June 3-4 and can deliver reasonably. The Great Willys Picnic on June 12 in Kempton, PA.”
Here’s a rare set of Kelly hubs.
“Kelly Mfg. Automatic locking hubs. These are off of a 1953 Willys CJ3a, but, should fit most Jeeps with a Dana 25 or 27 front axle. They are ten spline. These hubs were usually dealer installed options, and are in very good shape, and in working order. Great for a restoration project. $80.00, or would consider trading for a good 5.38 ring and pinion for the same Dana 25/27 front axle.”
http://fresno.craigslist.org/pts/5522308694.html
UPDATE: **SOLD** Was $1200.
Jim forwarded this ad.
‘Parts left over from restoration of 1952 Willys m38. Hood from CJ3, heater, 14″ rims, driver side fender, seat pan and springs,tow bar, 24v horn, tool box lid and more.
Two Hard Tops! Enough good parts to make one nice hard top. Includes the windshield needed to install the hardtop. $1200 take it all. Will consider selling individual parts other than the hardtops. Will deliver hardtop within 50 miles otherwise local pickup only. Purchaser pays for easily shipable items.”
UPDATE: **SOLD** Was $100.
Might be a little twisted, but this Porter & Reed top is still worth a look.
“This is a jeep top for a CJ2A.”
UPDATE: **SOLD** Was $1000.
(03/29/2016) Here’s an AMC-marked hardtop.
“mint condition cj-6 hardtop w/ full rollup window doors and rear hatch
all glass intact. AMC Serial numbered”
UPDATE: **SOLD** Was $300.
Could be a good price.
“Warn Winch model 6000, off of a willys jeep or wagon. in good condition worked when removed.”
UPDATE: **SOLD** Was $400.
The photo below shows the top before Bruce began some restoration on it.
“Full Koenig Metal Hard Top for CJ2A. Top is in good shape. Roll up glass windows in doors. Plexiglass in rear side and rear hatch. I have taken rear and rear side panels out and started to clean metal, Rr side have been cleaned and one primed. Rear hatch has also been cleaned/primed. Planned on putting safety glass in the rear and side panels. Have all pieces to put it back together except bolts. it was taken apart when I got it and those were already missing. Top is in good shape, halfway cleaned of surface rust. No holes or damage that I have seen. Koenig tag is off side panel.
$400 obo located in Des Moines IA.”
UPDATE: **Status Unknown** Was $500.
Looks in good shape.
“This is a completely rebuilt hard top for a 1948 willys flat fender jeep with new glass, rubber and paint.
It is creme color with both doors and windows.”
Seller has parts for different CJ-5s.
“I have brand new panels for a cj5 I will give the years that each panel will fit below i have almost 400 in panels I want 300 for them all they all came from walcks 4×4 he makes the panels here in pa himself their not foreign panels an they are dead on i went a different route so I do not need them any longer also have the tub if u are interested in it it’s not in bad shape but needs work it’s a 73 not a 2016
Ok what I have:
Front floor patch panel left driver side cj5 1955-1975 paid $63
Front floor braces driver side cj5 1972-1975 paid $131.20
Front floor braces passenger side cj5 1972-1975 paid $131.20
Rear floor support channel fits cj, m38, m38a1 paid $21.00
All years are correct and accurate along with prices minus tax I’m asking 300”
Ted’s got these parts for sale on eBay.
1. Data Plates for CJ-2A:
2. Rear PTO Gearbox:
3. PGO Drum Pulley:
4. Ramsey Capstan Winch