Here’s an early grille.
“I have a slat grill from a Willys military jeep.
Needs a little work and clean up but its legit.”
Here’s an early grille.
“I have a slat grill from a Willys military jeep.
Needs a little work and clean up but its legit.”
UPDATE: **Status Unknown** Was No Price.
Looks like it was involved in some kind of race.
“Parting out old jeep. Have windshield, fenders, grill, radiator, hood, Tub, roll bar, tranny, differential, transfer case. NO ENGINE. Take some or take all.”
Looks like a 520 Koenig Jiffy Cab with vertical doors.
“Hard Top for Jeep
Brand : Koenig Iron Works , body division , Houston Texas
The design and build of this steel top is very hi quality.
-Roll up windows in doors
-sliding rear side windows
-stainless steel fasteners
-currently on a 1968 cj5
-will remove from my jeep when sold (currently on my jeep)”
Might be worth a look.
“jeep top, windows are cracked, there are no doors , but the top is in good condition and the side windows are there just cracked. ”
UPDATE: **SOLD** Was $700.
(02/18/2016) Nice looking top. It looks like a Meyer.
“Selling a Jeep Willys CJ-6 Kaiser hard top with doors. Top has solid glass all around, light oxidation, hard doors with glass m, roof rack, light with interior handle still assembled.”
UPDATE: **SOLD** Was $500.
Looks like a Porter Reed top. Did they have the large rear windows?
“Very nice condition cracked glass one side window and the rear window doors are in good shape”
It is a mix of parts, including a Braden PTO.
“1955 CJ5 V8 trans and a BUICK V6 engine blue one in pic with title $2500.00
1974 CJ6 V8 full cab metal top rare metal doors $4000.00
CJ6
Hardtop
diffs
engine and transmissions
roll bars
Hoods
Wheels
CJ3 parts CJ 2 parts
all must go
Rare and expensive RAMSEY PTO winch and BRADEN PTO Jeep Winch
more
Selling all
Call the number now for information”
UPDATE: **Status Unknown** Was $1900
(09/11/2013) The body/cage/windshield was previously listed for sale here.
“New fiberglass tubb, cj2a boxed frame with title. Custom roll age with seat mounts and rear tire mount. Custom exo rear bumper, rock sliders, and hand fabricated front fender frames. Original windshield frame and grill.”
UPDATE: **SOLD** Was $450.
Looks in good shape.
“For sale: M38 Arctic hard top for Willys jeep. Was on a ’42 MB, but should fit all MBs, GPWs, M38s, CJ2As, 3As, and maybe 3Bs??
All complete, with doors too.
Back glass and one side glass is cracked but intact. Fairly good shape and getting tougher to find! Only selling because I got a soft top. Asking $450 call or text Justin.”
It’s got a small amount of rust, but might be worth a look at that price.
“Cab top for jeep or willys cj. Rear door and latch work. Light works. Solid. Has one rust spot.”
Steve’s got a variety of unused bearings that came with a wagon he bought. He has no use for them. He’d rather give them away to eWillys readers than recycle them. If you are interested, contact Steve at owenwalk@comcast.net.
UPDATE: **SOLD** Was $100
The top might not have much value, but the MB/GPW body in the background appears to have some value. I don’t know if it is for sale, but might be worth asking.
“Homemade steel roof, includes side and rear doors. Was welded on 1942 willys Jeep. Roll bar included.”
UPDATE: **SOLD** Was $100
Most of these I run across on Craigslist aren’t in this good of shape.
“Rear draw bar or bumper off a 1964 cj3b. Great condition. ”
UPDATE: **SOLD** Was $750.
Looks like a nice hardtop. I like the carrier mounted on top. Not sure if this is a 2A or 3A top. Is it a worman? or steel sears top?
“I have a hardtop for a Willys for sale. It is in amazing condition. I originally purchased it for my GPW and didn’t realize I needed the taller windshield. This is for the CJ2a and 3a taller windshields.
It is complete with all pieces.”
UPDATE: **SOLD** Was $450.
Needs a couple pieces of glass.
“Koenig model 330 hard top with doors, real clean shape, no rust,super clean inside, fits cj flat fender jeeps, missing 1 side glass in cab , missing 1 door glass, doors have latches, handles and regulaters, back glass is broke, has rear latch assembley, missing outter handle, call for more info,”
Looks like it fits a CJ-5/6.
“kelly Steel Cab off a 1955 Willys Jeep, needs some minor repairs. Please email for more pics or additional information.”
UPDATE: **Status Unknown** Was $2000 and located in St. James, NY.
This is a rare item. This was on Facebook a few days ago.
“Once in a lifetime opportunity for the jeep restorer. This is still new in box Kelly Mfg co jeep half cab for a cj3a complete, w doors, glass etc”
It’s got some dings.
“I have for sale on aluminum hard top for an early flat fender Jeep. World War 2 era cj2a cj3a Jeep made by Allstate, Sears and Roebuck. Includes the doors, slides and back lift area. Just needs new plexi-glass and some minor straightening out of some of the panels. A hole in the top right passenger side is the worse spot.”
UPDATE: **SOLD** Was $800
Seller admits he doesn’t know what it is worth.
“I have a custom top for a willys jeep its an aluminum top with doors hard shell i dont lnow really how much to sell it for lets say $800 or make an offer i dont want it.”
Mitch has the following items for sale. No pics of the chassis just yet. $500 for the tub, $500 for the frame and axels, and $500 for the rest. Call him at 9546617279 or email mfgraf@gmail.com
“I have for sale a nice, solid, straight and rust free rolling chassis from a 1955 Jeep M38A-1. Included as part of the chassis are original Dana 44 & 25 axle assemblies with 5.38 gear ratios and open differentials, suspension, some steering linkage and good steel brake lines. The OEM wheels/tires are NOT INCLUDED so arrangements would need to be made. Also included is an original M38A-1 tub which has been media blasted and bare metal, (it is useable but requires repair primarily in the floor area), original T90/Spicer 18 transmission/transfer case assembly, T90/Spicer 20 transmission/transfer case assembly with SB Chevy transmission adapter, OEM M38A-1 driveshafts, nice early CJ-5 hood and grill.”
UPDATE: **SOLD** Was $850.
This Roper is different than others I’ve seen or documented. Maybe it was primarily sold to tractors?
“1940’s Roper Iron Works pto post hole digger for Willy’s Jeep or tractor in good condition. Appears to be complete and comes with auger, may have two others. Turns smooth and freely. Located about 30 miles north of Lake Havasu City”
UPDATE: **SOLD** Was $2750.
I’ve lost track of what these are worth.
“WWII Capstan Braden Winch setup for a jeep. It is a nice setup and is pretty much complete, the winch head turns fine. Some of the smaller parts have some wear, the u joints in the drive shaft will need work. Over all a good used setup.”
This looks like the Koenig standard hardtop with the vertical rear doors. Seems in great shape.
“Hard Top for Jeep
Brand : Koenig Iron Works , body division , Houston Texas
The design and build of this steel top is very hi quality.
-Roll up windows in doors
-sliding rear side windows
-stainless steel fasteners
-currently on a 1968 cj5
-will remove from my jeep when sold (currently on my jeep)”
http://minneapolis.craigslist.org/hnp/pts/5401939331.html
UPDATE: Still Available.
(12/06/2015) Mike spotted this one. It might be a good price.
“I have a willys jeep half cab. It came off a 61 willys jeep. It has all of the glass in it, and I have the doors for it. Asking $100 Obo.”