UPDATE: **SOLD** Was $1500.
(10/04/2014) It’s a stretched body.
Willys Fiberglass Drag Jeep Body
Has been widen & extended
Approx: length 122in. (10ft. 2in) width 60in. (5ft.)
Would make a great sand drag jeep / dune jeep / rock crawler”
UPDATE: **SOLD** Was $1500.
(10/04/2014) It’s a stretched body.
Willys Fiberglass Drag Jeep Body
Has been widen & extended
Approx: length 122in. (10ft. 2in) width 60in. (5ft.)
Would make a great sand drag jeep / dune jeep / rock crawler”
UPDATE: **SOLD** Was $250.
Jake’s got this half cab for sale.
“hi there, i have a willys jeep cj2a cj3a mb hard top half cab for sale today.
asking 250 but i am open to offers and or trades.
thanks for looking, have a great day.”
UPDATE: **SOLD** Was $450
This is a new top. For more info, email paul at paulshapiro_2 @ msn.com
“For sale-new bestop tiger top fits 55-75 cj6& 51-62 m38a1 $450. My windshield worked over so much that doors won’t fit no matter what i tried. Removed from jeep-back in box.”
UPDATE: **SOLD** Was $1000
Literally a pile of parts.
“Willy’s Flat Fender Jeep Cj2a parts.
Tub, fenders, hood , windshield, tailgate and two chassis and one frame.”
The windows aren’t too clear, but no obvious holes or tears.
“Soft top and doors made by kayline. Good shape . Doors look brand new. Email with questions. Thanks for looking.”
No word on doors.
“Jeep top off of an old willys cj2a or cj3a. Not perfect. Not the worst. pictures say all.”
UPDATE: **SOLD** Was $375.
These are hard to find.
“Very hard to find 60 40 split bench seat for a Jeep. Seat is still in my Jeep. Will take out when sold. It comes with the drivers side seat bracket but not the passenger side. Passenger side should be the same as a regular CJ seat bracket.
This seat has been re-done. It is a little dirty. I don’t see any cuts. Seats look really nice when cleaned.
The drivers side seat does need some springs tightened on the bottom. Your butt sags through the back opening of the seat.”
UPDATE: **SOLD**
Steve’s selling his Parkette racing body and jewels roll bar. The Parkette body is rare, but the jewels stainless steel roll bar might be rarer.
1) **SOLD** Was $750 Vintage 1950 Jeep CJ 3A Best Jewels Stainless Steel roll cage. One of a kind, you’ll not find another one like this.
2) Was $600. **SOLD** Parkette Racing Body – In good shape. Bobcat Hood, Fenders & Uncut Grille. Great for racer, rat rad, crawler.
I’m assuming this photo was prior to reassembly.
“Ramsey 105A PTO for Willys Model M-38 / M-38A1 Military Jeep 1949-1952. Completely rebuilt: New bearings, seals output shaft, sprocket, and chain.”
UPDATE: **SOLD** Was on $500
Looks in good shape (only the hardtop is for sale).
“Steel top off a Willys CJ3B Jeep (Jeep is NOT for sale). I recently removed the top from the Jeep and disassembled it. The rear side and back windows have been replaced with plexiglass. If interested please reply with a phone number and I will call you. I will not reply by email.”
UPDATE: **SOLD** Was $100
If this were closer, I’d snap it up in a heartbeat.
“Old Sku wench. 8000 pound wench.Its a Bellview or a early warn. This is a power in only.The mounting bracket not exact fit but with some new holes and your mad skills it would be mounted up before lunch! Your buddy gets stuck in the ditch, you have 8000 A pound wench on your macho boy truck. Just hook up and pull yourself in with him.”
Looks like a 2A top to me.
“soft top with doors and frame pieces. off of a 1946 willys cj6a. fair condition, doors are almost perfect.no vinal in side windows, no hinges,no mounting hardware,has oval type grommets for 1/4 turn twist locks. something good to start with or use for the summer.will fit many other year jeeps.”
Here’s a hard to find motor. No description of condition.
UPDATE: **SOLD** Was $5250.
Variety of parts.
“This is a 35+ year collection of new old stock body panels. I have the front and rear floor pans, rear quarters with inner panels already spot-welded in place, CJ3B front quarters, (piece can be removed to convert to CJ3A). Also included is a N.O.S. 3A grille, N.O.S. 3A hood, N.O.S. tool box, a used windshield and used gate. This package also includes a donor JEEP that is a CJ3A with a very clean frame with straight frame horns with no extra junk welded on and it’s not rusted up. You can’t buy these parts in O.E.M. without spending another 35 years searching. This is not imported junk. Please email for an appointment to take a look at the collection. It is located about ten miles east of Hershey, PA.”
No pics provided.
“47 Willys tub, hood, grill and tail gate with title.
Dana 41 housing. Sand blasted and primed
Dana 41 Axles shafts, good condition, clean.
Dana 41 Carrier and pinion 5.38 gears. good condition.
Dana 25 housing, not in picture, not cleaned but empty.
Dana 25 Knuckle assembly, Spindles, brake assembly attached.
King pins. good shape
Dana 25 Axles, original ball bearing style, good condition.
Dana 25 Carrier and pinion 5.38 gears
Dana 25 Complete with 11″ drum brake upgrade.
Just trying to clean out the garage. Give me a call or text”
No pics provided.
“I have willys jeep pickup, wagon, CJ2a, FC-150, CJ5 parts for sale. I have Many parts so if you are looking for any parts e-mail me and I will check my inventory. “
UPDATE: **SOLD** Was $350.
One crack in driver’s side glass.
“Get ready for a cold Winter and still enjoy your flatfender Willys. Complete aluminum hardtop removed from a recently acquired 1948 CJ-2A. I am not going to use the top so it is up for sale or possible trades. Hardtop is not new, but in a good usable condition. Glass windows all the way around. Piano style hinges on doors and back. Only crack in glass as shown in bottom corner of drivers side glass. Does not show when window is up. I do not see any manufacturer tag on the hardtop. Hardtop may fit other Willys Jeeps but I will leave that decision up to buyer. Hardtop is $350.00 cash or possible trade for complete, buildable 134 L Head engine or good set of original wheels and tires.”
UPDATE: **SOLD** Was $75.
The price is listed at $75, but I’m not sure if that’s for the tranny or the hubs or?
“GPW or MB Tranny needs rebuilt and hubs are in good shape there are 1/2 ton hubs and one set of 3/4 ton hubs all or sell individually best offer “
UPDATE: **SOLD** Was $200.
Looks like a good price.
“Aluminum Hard top for a Willys Jeep. Came off of a 1947 CJ2a”
Seller has various parts for sale.
“Im doing a drive train swap on a 1962 Scout 80 i have a matching set of dana 27 axles, a married up t90 transmission(just rebuilt) and dana 18 transfer case, a 196 inline 6 engine from a 1962ish AMC Rambler two sets of 33″ tires on 5×5.5 rims, a windshield + windshield frame and lots of original scout parts. I am willing to make deals, negotiate on price or possibly trade for 4×4 parts, sbc parts.
Dana 27 axles – $200 obo
Transmission – $100 obo
Transfer case – $100 obo
Inline 6 engine – $175 obo
Black rims and tires – $175 obo
Alloy rims and tires – $150 obo
Windshield Frame + glass – $100 obo”
UPDATE: **SOLD* Was $250.
Needs glass.
“This is an aluminum top that is supposed to fit late 40’s to early 50’s Willys flat fender jeeps. It is home made, window glass is missing, has a few stress cracks but otherwise solid.
I’m posting this for a friend so please do not contact me via email. He also doesn’t answer texts so call the number provided and talk to him directly.”
UPDATE: **SOLD** Was Make Offer.
Seller hopes to sell altogether.
“I have for sale a bunch of 1940ish jeep willy parts. Most are new in original boxes along with a few used parts. We have written down most of the part numbers and desciptions of what we have, there is too much to list so please contact me for more information. Looking to sell everything as one whole lot but may consider parting out.”
UPDATE: This just sold recently.
The tub sure looks solid. I’m surprised this was removed from the jeep is was on.
“mid 1946 tub, fenders,radiator guard, hood, wind shield– original harvard red paint, no dents ,super hard to find in this condition, what would you rather have to restore your willys? a near perfect all orignal as this, or an MD JUAN, made in the Philipines repo that never fit right , look right, not to mention all the time you will waste in adjustments.”
UPDATE: **Status Unknown** Was $400.
Looks like a good deal.
“CJ2A Jeep Bestop white, new old stock
Never used, brand new in box
Came from a non-smoking home
Model#: 51002 for Jeep CJ2A from 1945 — 1949 and MB from 1941 — 1945
Complete kit with doors, bows, and hardware.
This top sells new for $750, will sacrifice at $400.”
No doors.
“This is a Cj-2 metal top off my 47 Willy’s It’s in pretty good shape considering it’s age.It has no rust thru spot’s. I don’t have the doors for it.”