Brett spotted this one just before Christmas. The auction is over. Bidding didn’t reach the reserve price. However, I thought it was interesting.
“WWII JEEP G503 TRANSFER CASE ASSEMBLY STILL IN THE ORIGINAL CRATE.”
Brett spotted this one just before Christmas. The auction is over. Bidding didn’t reach the reserve price. However, I thought it was interesting.
“WWII JEEP G503 TRANSFER CASE ASSEMBLY STILL IN THE ORIGINAL CRATE.”
No pics provided.
“Many parts for PRE 1972 jeeps. dana 25, 27, and 44 axles, dana 18 transfer cases, T90 transmissions, driveshafts, steering components, brake parts, wheels, front grill, misc hardware…. Just ask – I may have it.”
UPDATE: A pic now provided. There’s some value here.
“CJ2A ans CJ3A parts:
windshield frame-$50
radiator-$50
front fenders pr-$50
hood-$50
grille-$40
tow bar-$50
frame with axles whole rolling chassis-$250
axles-$100
complete set of leaf springs-$75 call 419-602-3343.”
This has some dents, but these don’t appear for sale too often.
“Sears allstate aluminim jeep top for cj-2a.
Fair condition with doors.
$750.
J.Mac 303-823-5308”
UPDATE: **SOLD** Was $325. It’s a Kelly Hardtop.
“New price – move fast to grab this nice hard top. Purchased to fit my ’43 Ford GPW, but I decided to go with all canvas. Nice condition. Photos below. I have owned it for three years, during which it has been stored indoors. Includes hard top, two small panels for leading edge of door, and two doors. Condition good, other than a small, non-rusting crease low down on one door.
I looked at the manufacturers plate. It seems to say model F 23-300,
which seems to be what would fit a cj2a or cj3a… I think. Maybe later models –
you tell me.”
Hog spotted these. Someone might like them. I’m not sure what they are worth.
“NOS Dualmatic hubs for CJ3A and later Jeeps with C-clip front axles. 10 spine, original mounting bolts. Some shelf wear but never mounted. $250/obo.”
No pics provided.
“New replacement flooring kit for willys jeep cj2a and cj3a. Ready to weld in your tub.”
No pics provided.
“Fenders, hoods, grills& doors but have other parts. Dana 25, timken model 51 ? 5.38 gearing. banjo style rear from a willys p/u (splits in the middle). T 90 trans, model 18 t case, some glass, chevy V8 adapters and some mics. NO TEXT 541-619-1602 NO TEXT, Thank you”
Steve has this rear seat he pulled from his CJ-2A. After a little research, I *think* it is a CJ-5 Rear Seat.
“I sold my 48 CJ2A and now just have the rear seat to sell. Excelent shape. I dont think this is a factory type willys rear seat,but fits like it was. Has seatbelts attached 2 the frame of the seat. Downs IL. 309-357-603six aft 345pm m-f ”
No pics provided.
“Steel top in good shape. Still available.”
“Misc Flat Fender Jeep Parts.
Willy’s Hood,Tailgate
“F” Script Bolts
Varies Tranny and Transfer Cases
Check out the pics
No pics provided.
“Some Jeeps & Many PARTS, Call ED @ 4026895105 ,Thanks”
UPDATE: **SOLD** Was $400
“Fits 1948-53 M38 and CJ-3A
Black vinyl
Clear windows
Brand New still in box. Comes complete with bows and doors.
The bows are used but the Top and Doors are NEW
Retail from 4 wheel parts is $735.99”
“willys jeep bolt on snow plow, complete hy-low jeep pump, controls, 6 foot blade, belt, brackets. its all there and it and works good. ram cylinder has leak. it bolts on so it comes off very easy. as-is. e-mail any questions. manual angle. $450.00 can get more pictures.”
UPDATE: Price dropped to $299
(11/23/2011) You can learn more about the late model rear seat at the CJ-2A Page.
“super rare ,all orig w/factory red covers,email me for front pic of seat,609-654-5070”
Hog spotted this. Not in great condition, but still rare.
“Seldom seen factory optional CJ seat.
Restorable condition. Missing mounting
hardware only. $80 OBO/trade. 301-491-8834”
No pics provided.
“L head engines,hoods,transmission parts,drivetrain,few starters,carbs,hard top 3a ,Lots of nos trans and transfer case bearings gears, etc….cj3a frame,rebuilt l head engine,used and nos parts Thanks email mclewis_30534@yahoo”
This might be worth a look.
“For sale is a TigerTop and soft doors, white in color. Top and doors have NO rips, holes or cracks. Near new and never used, just a little dusty/dirty. All hardware is included such as the header, door brackets, button screws and braces. Everything is there to install it. This top will fit 41-45 MB, 41-45 GPW, 46-49 CJ-2A. This top was going to go on my 48 Willys Jeep, but plans changed.”
No pics provided.
“We have tons of parts!!!!!! Military and civilian jeep parts. CJ2A and M38A1 parts. Let me know what you need and I probably have 3 or 4 of them. I even have the old metal hard tops for them. Call, text or email. 425 * 923 * 6935”
No pics provided.
“Many parts for PRE 1972 jeeps. dana 25, 27, and 44 axles, dana 18 transfer cases, T90 transmissions, driveshafts, steering components, brake parts, wheels, front grill, misc hardware…. Just ask – I may have it.”
I don’t remember seeing a top with ribs like this one.
“Hard top with doors. Hard top came off a 53 cj3. This will keep you dry.”
UPDATE: **SOLD** Was $950.
“I have an original snowplow for a 1946 willys cj2a with all the frame re-enforcement pieces, torque tubes and angle bar for the front springs, hydraulic pump and cylinder – Scheneker iron works model “b”plow with Hy-Lo-Jeep monarch belt driven hydraulics. I wanted to use this but after i took the frame off and went “all in” i can’t see driving it that much. every piece including hy-lo switch for the dash. complete and rare.”
This seller has a variety of items.
“I have some projects that I know now that I will probably never get to. I am really trying to simplify my life and wanna move some stuff.
’81 CJ8 Scrambler
4.2, swapped in T18 and Dana 20 t/c
Stock height and axles. Has aluminum rims and BFG A/T in 235/15’s
Has 1/2 cab but, no doors or rear window.
Needs driveshafts installed. Probably will need a rear one lengthened.
Runs but, needs work.
$2500 firm
http://s122.photobucket.com/albums/o…ns_photos/CJ8/
’63 Willys Wagon
50k original miles on the body. Has a Chevy Nova front clip graft and frame has been aligned at a frame shop. Chevy Nova 10 bolt rear axle.
Low mile LT1/4L60E 2wd setup goes with it but, not installed. I have extra sheet metal that I will let go with it also. Have a new front suspension rebuild kit and aftermarket wiring harness also.
$2500 firm
http://s122.photobucket.com/albums/o…illys%20wagon/
Front and rear Dana 60’s
front is a Chevy kingpin axle. Dis-assembled. Housing has been sandblasted and primed. Has brand new SRW hubs and rotors.
rear is all stock and outt of a 70’s Dodge. They were gonna go in the Scrambler.
$1200/pair
Miller 350 LX Tig welder.
Need I say more? This is a Cadillac among tig machines and is the upgraded water cooled setup.
$5000
Jeep Comanche bed and frame with fiberglas topper.
I was gonna make a sweet trailer to tow behind my XJ but, sold the XJ and so, really don’t need it. It does not yet have a tongue or hitch on it. Still has the Dna 35 under it but for full price I will throw in a trailer axle with 5 x 4.5 BP to match the Jeep.
$250
http://s122.photobucket.com/albums/o…omanche%20bed/”
“Jeep pto Ramsey model STC-2 . very good shape $225 OBO”
Email for price (nathalie.gannon@bell.net). You can learn more about these rare heaters here.