UPDATE: **SOLD** Was $225. I got to check out these hubs and they are in great condition. These aren’t a hub that have a ‘free’ and ‘lock position, rather you use these to replace the full time hub to reduce wear on the front running gear.
Parts Research Archives
Top Bows — Who sent me a Top Bow question?
UPDATE: It turns out Mike still operates the business topbows, but is too busy with his current project, so topbows is temporarily closed. He mentions in the comment below that John Bizal at www.midwestmil.com has bows as well. Thanks Mike!
Yesterday morning I received a question from a reader regarding where to purchase top bows for a CJ-2A (they had checked with topbows.com and found they weren’t in business).
Unfortunately, I can’t find that email (please re-email me if it is you) — it is possible I accidentally deleted the email as I’m still getting used to my new android phone. Why I’m perfectly capable with a computer and perfectly in-capable with a phone still confuses me ….
Since I don’t know of anyone that sells top bows, I did some searches on CJ-2A Top Bows, but had no luck.
Then I remember that Beachwood Canvas carried various top-related items. After a quick tour of their site, I found they sell a complete set or just the front set. You can follow this link https://www.beachwoodcanvas.com/order/productlist.cfm
Then, select CJ-2A from the drop down list of Vehicle types & Group 18: Body, Body Parts and Kits. Finally, enter the search term ‘bows’. Bows are $195 for the front set and $350 for an entire set.
Paul has this Capstan Winch for Sale La Conner, Wa **SOLD**
UPDATE: **SOLD**
“Jeep Capstan Winch Assy (Linkbelt)in good operating condition. (Came on 1946 CJ2A I just purchased that I have no use for) Missing the rope roller assy and the original handle assy. (Both available from CapstanWinch.com). Operating handle is relocated horizontally, below winch mounting platform on lower right-hand side. (see attached picture.)”
A pair of Stainless Lights Southern, Il $100 + shipping
Mike has some lights for sale.
This is a set of Unity Spotlights, chrome, 12 volt. I bought them new and hardly used them. I’d like $100.00 plus $15.00 to ship. These spotlights cost $150.00 new each. Email me at mikester51@comcast.net
Rolling Chassis Holyoke, Ma Make Offer
There’s some value here.
‘willys jeep off road project, lock rights front and rear, 5.38 gears, front disc brakes, lift springs, rancho shocks,34 x 9.50 s swampers,M38 tub fenders,grill hood give me a call if your interested, 1 413 535 8311″
Flattie Parts Champion, Oh **SOLD**
UPDATE: **SOLD** Was $1700
“1942/46 Willys(.no body),fenders,hoods,wind screens,transmission,rolling chassis..1700 or best offer.have more photos available.”
Flattie Fiberglass Body Longmont, CO **SOLD**
UPDATE: **SOLD** Was $1200.
Just the body is for sale.
“replace that rusty aging body on your cj2a/3a with this brand new fiberglass body including a tilt one piece front clip. body has only been bolted to a chassis and never titled, and is ready to mount on your frame, or buy the matkins extreme frame i also have for sale. email for more information, or come see it.”
A rare set of Allstate Hubs Troy, Id $50
If you like rare hubs, these might be of interest to you.
“Sears-Roebucks Allsatate locking hubs in good working condition call 208-835-6902”
Willys #48 Koenig dual stick PTO Gresham, Or $600
It looks in great shape.
“Rare dual stick Koenig PTO. Gone through by Nick Miller. Fits Willys wagon or pickup.”
WWII Braden J2-134 Capstan Winch **SOLD**
UPDATE: **SOLD** Was on eBay.
Josh is auctioning this nicely restored Capstan Winch on eBay.
He writes, “You are bidding on a WW2 BRADEN J2-134 CAPSTAN WINCH for the WW2 Ford GPW, GPA, Willys MB and Weasel. This auction is for the head unit as pictured and the Portrayal Press Capstan Winch manual. The winch is the correct war period model with the four cap screws in the head. The winch has been been sandblasted, cleaned, and painted with TM9 Ordnance Red oxide epoxy primer and TM9 lusterless Olive Drab shade #6. In the preservation of this winch I did create a custom gasket for the oil sump and will include the broken original with the sale. I also fabricated a new top cover and will also include the damage original. As you can see in the pictures the gears all look fantastic and the winch turns easily and smoothly as it should. All oil pan bolts are marked RA. The only negative things I can say about the winch are that the oil pan has a couple of dents (they could be worked out) and the area around the bottom drain plug has been brazed at one time. The drain plug does still function and the repair doesn’t appear to leak. Both of these imperfections will not easily be visible when mounted.”
Dually Adapter and the Dually Section
UPDATE: Steve found a 2nd patent for an alternative Dually system. I’ve moved both Dually patent information to the New Dually Page.
CJ-3B & Other Flattie Parts Virginia, Mn
Here’s a variety of parts.
“I have a list of parts for sale from old willys cj2a’s and cj5 jeeps. Id like to sell the whole lot for one price so make offer. The list starting with cj5 stuff is Cluxe hood latches never used $25, Bestop biikini top never used $75, Wagner brake master cylinder never used $20, 3 wagner wheel cylinders never used $30, Motor mounts never used $20, Used grill $25, Windshield frame $35
CJ2A Parts
Trico vacuum wiper motor $10, Split windshield frame $35, 2 driver and 2 passenger seat frames $10 each, Water pump $10, 2 Air filters $25 each, Carbs $25 each, Starters $65 each, Gas tank never used $45, 2 Grills $25, Bell housing $10, 3 Shift towers $15 each, Trannys $50 each, Transfer case $50 each, Roll Bar $15, Rims 15″ and 16″ $10 each, Pto $50
Misc
2 F-head motors $100 for stuck motor and $150 For free spinning motor, 4 Jerry cans $5 each, Back seat Never used w/o frame $45, Complete axles $50 each, Gauge cluster from military jeep $45, Independent suspension differential with drive shafts $45
Also have a cj3b complete body on frame with tranny and no motor $400
Also have cj2a body and frame lifted with gm steering column $250
Have some duplicate parts not listed but when sold i will remove from list. Open to offers on all or individually.”
Hard top Spokane, Wa $250
The front appears rough.
“Artic Top for Military Jeep supposed to fit a 49 to 51 Willys jeep. Check pictures and help me out if you know more about it. Eric 509-263-0000.”
Wanted: Jeep CJ Hub 6-bolt Pattern Spokane, Wa
I don’t know how common or uncommon these are.
“I’m looking for a 6-bolt hub for a Jeep CJ with a Dana 30 front axle. Let me know if you have a spare laying around and what condition it’s in. Thanks.”
8000lb Warn Winch Reno, NV **SOLD**
UPDATE: **SOLD** Was $175.
“This is a older vintage warn winch 8000lb Model #5721. Very fast line speed, bulletproof construction and reliable. Comes with 100+ ft of cable, solenoid and rare in cab controls. Power in and free spool out. Everything is there and works great. $175.00 call”
Mike’s got a new radiator for sale — Illinois $130
Mike has a radiator for sale. His email address is mikester51@comcast.net.
“I have a radiator that is new and never used. It could fit a willys truck and other jeeps. It was made for a wrangler 92-96 for jeeps with auto or manual trannys. $130.00.”
Ramsey PTO Winch Boulder, CO **SOLD**
UPDATE:**SOLD** Was $300
This appears to be a good price.
“I have a Ramsey PTO Winch that came off of a 60’s Willys CJ-5. Its in good shape and all parts are there: winch, control box that bolts to transfer case, fairlead, and the driveshaft. The labels are hard to see in the pictures: The one on the control box says – PT1-J;The one on the winch says – Model # 1200-R (I think), Capacity 8000lb, and the Serial # (hard to make out). Looking to get $300 dollars for it”
Fulton windshield defroster Nampa, ID **SOLD**
UPDATE: **SOLD** Was $350.
There’s was another one of these for sale on eWillys. It was priced at $125.
“Just trying to find a local interested party in a Willys Jeep de-icer defogger unit. This was made by the Fulton Company. It was found in my grandfathers old stuff.”
Box Blade for Willys Jeep Siler City, NC $800
Original equipment? Anyone know?
“I have a 6 ft. box blade, 3 point that came off a Willys Jeep for sale. I think it’s original equipment as some jeeps came with hook ups for farm equipment. If interested call or E-mail me at 919-663-2111. No calls after 9 PM please…thanks…james…”
Various Flattie Parts Shodack, Ny
UPDATE: Still Available
Some good stuff here.
“1940’s to 1953 Willy’s &1 Ford Jeep, 1 M100 1/4 ton Trailer, 1 Radio Set M38, PHONE 518-479-3466 E-Mail crdllst@aol.com”
CJ-2A Hard Top Wenatchee, Wa $650
It looks in very good condition.
“Metal Top Only; Came off 1946 CJ2A; Top is complete with doors and windows that roll down and it has a back lift up window; Top is excellent condition; Will also fit other models; $650.00 OBO; Call Mick for any other questions @ 509-630-7951.”
Various Early Jeep Parts (PTO, Tranny, more) Colusa, Ca $500 for all
UPDATE: This is in Cali, no Colorado
This seller has a variety of parts, including an entire PTO system.
“50′ and 60’s jeep/willys parts. t-90 tranny, Dana 18 transfer case, Koenig pto winch with bumper, Dana 25/30 front axle and Dana 44 rear both spring over w/4.56 ratio, drive lines and leaf springs. $500.00 for all”
Overdrive, Transfercase, Tranny, Axles Georgia $750
Kevin’s got a good price on this combination of parts. You can email him at kroth936@yahoo.com to learn more.
“Tranny with overdrive and both axles….$750 for all of it…if someone only wants the overdrive it’s still $750….I hope someone needs this….also have a 4 cyl for $300”
Various Flattie Parts Phoenix, Az
Here are a few parts.
“I have 3 fenders 1 willys and 2 gpw. 1 cj2a hood, cj2a or m38 fuel tank and a post war engine with bell housing clutch and t90 engine is missing head and t90 is missing top cover. see pics please call 602-741-0721”
Early Slat Grille Corvallis, Or eBay
Here’s an early slat grille for auction. These don’t appear often. At this point, the price is already $600 +. Someone had the cojones to offer only $100 for this (see the questions at the bottom of the auction page).
“Original TR-20 bolt stamped slat grill. Came off my 1941 MB (No glove box, script Willys) Only ever had one can. Great shape, no rust- some original wiring, clips and hood gasket left in place for type/period matching. One of the first 25,000 grills ever produced. Never restored, messed with, original OD paint underneath. Some minor bends (easily fixed), one slat loose at top. This grill is is really, really great shape if you want all original parts for your restoration. These do not come up for auction very often at all. I will not give it away, but reserve is appropriately low. A great chance for a rare and special part. Don’t miss out. I would rather see it go to someone who knows what this part really means!”