UPDATE: Status Unknown. Was No Price.
Not sure how much value is here.
“Old Jeep Willy’s frames with cab and some parts. You haul away.”
UPDATE: Status Unknown. Was No Price.
Not sure how much value is here.
“Old Jeep Willy’s frames with cab and some parts. You haul away.”
UPDATE **SOLD** Was $6800.
Has some updates.
“952 Willys pick up.
Motor: 194 Chevy straight six
Transmission: T90
Transfer case: Dana 18 (4×4)
Since I have had the truck I have installed an original valve cover for the motor, refurbished carburetor, new plugs, new wires, new distributor cap, new exhaust pipe and muffler, new fuel filter, new tires, new rear main seal, new wheel brake cylinders and master brake cylinder, and repack the wheelbearings.
It is a very good solid old Willys. Recently won First Place Modified Rat Rod at the Red Bluff car show. Please contact me with any questions.”
Here’s an odd item.
https://minneapolis.craigslist.org/ank/pts/d/shafer-pig-rack-for-early-willys-pickup/6867579098.html
“Pig rack for Willys pickup, been in storage for many years. Very unique item. Has sliding rear lift gate. Came off ’52 Willys that worked the stockyards down in St. Paul MN”
I’m pretty sure we’ve seen this one for sale in the past. It might be a fun rig.
https://salem.craigslist.org/cto/d/amity-1952-willys/6878593716.html
“I have a willys thats sitting on a wagon frame it has a 260v8. It runs drives good. Text for more details”
UPDATE: **Status Unknown** Was $6500.
(02/02/2019) Will need some work. Rarely driven on roads.
“Think of this as a farm truck. It’s not pretty, but it’s pretty functional! I’ve owned this Willys for 9 years. I had it on the road for the first couple years but didn’t drive it many places (35mph) so just used it around the property and to push snow. A couple years ago I quit pushing snow so the Willys was just sitting. It’s time to go to a new owner.
The Willys always ran really good, so I spent some time on it to get it up and running: new battery, new plugs, wires, distributor cap and rotor (points are good). It started right up and sounds as good as ever. It’s been converted to 12V with alternator. The dump bed has a belt driven hydraulic pump that feeds two lift cylinders. It’s pretty beefy.
Continue reading
UPDATE: Price dropped to $5000.
Contact Guy at 605-281-0633. He prefers a text first because of the solicitors that call. There’s a trailer that also goes with it.
“1952 with a started frame off, had the frame sandblasted, primed and painted. New springs, shocks, brakes to include drums and slave cylinders. Rebuilt original engine with a new OEM head, rebuilt transmission and transfer care. Rear axle rebuilt and have all the parts for the front axle. 5 new tire on painted rims, Pintle hitch and d-rings for safety chains, plus lots of new part for engine and body.
The body is in great shape and complete with original heater core and gauges. Plus a 1/4 ton trailer goes with. All stored out of the elements.”
Here’s the truck before he started work:
His progress so far:
The trailer:
UPDATE: **SOLD** Was $18,500.
Lots of nice work on this build.
“350 Chevy L-T1 340 H.P., Chevy turbo auto trans, Cameron clip front end, Webster racing steering components, disc brakes, stereo/tape. Arare cruiser in exceptional condition.”
UPDATE: **SOLD** Was $8500.
(10/25/2016) “I have a 1962 WILLY’s Overland Truck/305 Engine /350 Transaction .The truck cab it’s self was customize by taking 7″ out of the center of the body & slanting it inward. The top was cut and shortened with a new top made out of a 1961 ford hood,this top will unbolt & come off to make this a open wheel roster ( how cool). The body was channeled over a 1988 Chevy S10 frame, new brake lines ,master cylinder booster ,brakes caliber’s ,& brake pads and shoes, and the rear differential ( Chevy 10 bolt ) has a Eaton locker pos a track, with 4/11 gears .The front grill has a 46 Chevy for the top half & the bottom half is a 51 Packard. The 1985 Camaro engine ,305 high output has a mild cam,aluminum intake,a new 600 Edelbrock carb, & a new HEI distributor . Home made exhaust manifold’s with side pipe’s . The transition a 350 TH shifts good & hard. This Truck run’s and drive’s great (fast & fun) ,one nice thing there is a endless amount of things to do to make this your truck $12,500.00 ,You can view more of this truck on YouTube @ 4 madmax4444 .”
UPDATE: **SOLD**
These jeeps are posted at Jeeptruck.com. Only two pics were posted. The flat fender is a 1958 DJ-3A.
“1952 Truck Marine V8, adapter plate to original 4×4 $2500
1958 Jeep solid no driveline 2×4 $1200 TX title
1955 Jeep, 4×4 no driveline solid, 1946 Chassis $1200”
UPDATE Still Available.
(08/27/2018) Don’t drop your phone while driving this, because there’s a pretty large gap in the floor. Maybe the seller has since added a transmission cover?
https://cedarrapids.craigslist.org/cto/d/anamosa-1949-willys-jeep-pickup-rat-rod/6853580292.html
“1949 Willys Jeep Pickup Rat Rod, selling to settle estate. Needs finished. runs and drives. Clear Title. 289- bored and stroked to 349. 407 H.P. Dyno Tuned, Have all Info, parts list, Dyno info. C-4 Automatic, New convertor, all rebuilt. Speedway Front End, New Tires, ALL NEW GLASS. Alloy Fuel Cell and more. Motor, almost $6,000, Transmission $900, plus parts replaced and bought. $12,000 to 13,000 invested. $10,000.00 or best offer. MOTOR SOUNDS KILLER!”
UPDATE: **SOLD** Was $3800.
Could be a good price.
“Truck runs and drives, V6 3 speed, truck has a fresh registration, manual transmission, it will make a nice hot rod project. New lights all around, new brakes, new battery, new high voltage alternator, and many other new parts. This is a very unique truck. Truck passes CHP inspection. Call for more info. Truck will drive you anywhere!”
UPDATE: **SOLD** Was $16,000.
Looks like a nice refurb.
“1961 Willys pickup, new ford 302 with 4 speed, 4×4 works good, 1/2 ton ford axles, power steering power brakes, everything works, call or text for more details, may be willing to trade for something fun, let me know what you have, possible trade for a newer side by side.”
TJ shared this all-business truck.
https://www.facebook.com/marketplace/item/564441190743490/?ref=messenger_share
“1956 Willys pickup with a PTO post hole auger on the back. Has a hydraulic pump that lifts, lowers and tilts side to side. If you want to dig holes for fencing, it works, just old, ugly and rusty. No title. Off road only. Had lots of new parts. Cap/rotor/coil, plugs, wires, exhaust, air cleaner, alternator, manifold gasket, battery, re-wired ignition and battery/starter cables, solenoid, starter, fuel lines,fuel filter, oil change, gauge set and more. Brakes aren’t hooked up. Runs, drives, digs. Not pretty but functions. Frame is repaired in many places. 1500 obo will deliver at extra cos”
UPDATE: This is now on eBay.
(02/08/2019) Something different. The interior nees a little finishing.
“’58 Willy’s 4×4 Truck
Custom built Crew Cab (4 door)
350 GM motor & 4L60 automatic transmission
373 limited slip rear axle
Drum brakes rear, disk brakes front
Manual 4×4 shifter
Stereo, heater, Tilt steering
’95 GM chassis, suspension, wiring, fuel lines, steering, brakes
Stake bed with backup flood lights
Stake bed with small compartment box (rear right-side)
Tires – 265/70 R16, Cooper Discover ATR
Wheels – 16″, 6 lug, MR2 Motoring.
4×4 works
Runs, Drives, requires some attention
Interior requires attention.”
No pics provided.
https://sfbay.craigslist.org/eby/cto/d/knightsen-willys-jeeps/6842590934.html
“Have a 47 Willy’s and a 59 Willy’s pickup”
UPDATE: **SOLD** Was at auction.
This auction was held yesterday, March 16th. Anyone see this truck in person? Looks like a nice one.
Beautiful truck with a unique interior (which I would consider more southwestern-themed than western-themed).
https://stlouis.craigslist.org/cto/d/trenton-rare-1955-willys-jeep-4×4-pickup/6826644096.html
“Hard to find Rare Willys Jeep truck 4×4 body off restorated with all very straight body lines and fenders. The gorgeous custom aqua paint is done in high quality with a beautiful western theme interior. These were made for hard work so it is special to find one in this condition. The rebuilt motor is a 226.2cid rated at 115 HP and drives like a dream with its 3 speed transmission. Custom side rails done in high quality are removeable. The undercarriage is spotless. Mileage of 748 is undocumented. Options include: selective drive hubs, power take off, oil bath air cleaner, oil filter, and heater. This jeep also is equipped with blue tooth which was professionally installed for your music enjoyment. No disappointments here as you can drive or show it…a real looker done in high quality.”
UPDATE: **SOLD** Was $5000.
“This is what is known in the Jeep world as a Jeep Salad. It’s built up from parts of several old Willys from various years.
The chassis is mid-50s Wagon with the L6-226 flathead engine.
Original 12V generator system
Transmission and transfer case are standard T-90 and D-18
Rear axle has coil, overload springs added for greater payload.
Stake bed is a hydraulic tilt bed – PTO driven. It’s a well done, home made job. and it works.
Dual exhaust stacks are obviously home made.
Good tires and a non-matching spare
Rear window glass cracked
Driver window cracked – may have a spare
Windshield good
Lights work
Engine needs head gasket – purchased but not yet installed
Needs fuel pump – also purchased but not yet installed.
We’ll knock $100 off if you want to do those yourself.
New gas tank
Also have:
spare hood – green
spare short block
spare transmission
other misc parts”
I’m not sure what’s all here. No pics provided.
https://sfbay.craigslist.org/scz/cto/d/aptos-1940s-box-engine-jeep-truck/6820412566.html
“I have a 1940’s Willy Jeep truck with the original box engine, and most original parts, only slight coastal rust. Also there is another body (most parts missing) I am trying to get rid of. Ask for photos, 10000 for both, OBO”
Travis shared this updated truck. The description has me wondering if it runs.
https://nh.craigslist.org/cto/d/canaan-jeep-for-sale/6826473408.html
“47 willy’s on a S-10 frame, whole or parts”
Rough, but I dig it.
https://salem.craigslist.org/cto/d/sublimity-willys-pickup/6821916387.html
“1956 Willys pickup with a post hole auger on the back. PTO drivin off the transfer case to a PTO gear box on the rear of the pickup. Has a 250 inline 6 Ford and a Ford 3 speed adapted to a Dana 18 transfer case.
Pros
-runs, drives, operates and digs holes
-rewired ignition and battery cables
-New plugs, wires, cap, rotor, coil, fuel filter, fuel lines, altranator, air cleaner, oil change, belts, starter, exhaust to down pipe gasket, exhaust & muffler, gauge set, battery, and more
Cons
-lots of rust
-previous owner patched the frame in many places
-lots of jimmy rigged stuff
-radiator has small leak. Does not overheat
-no brakes
-it’s ugly
-no title/off road use only
Overall it works well but it’s ugly and nasty. Price will go up as I keep fixing/replacing parts.”
Truck isn’t registered or plated, though it shows a plate on the back.
https://indianapolis.craigslist.org/cto/d/fishers-1960-willys-pickup-restomod/6820408394.html
“1960 Willys pickup on sandblasted and painted S10 Chevy truck frame with 383 Stroker, T400 with racing clutches and 2600 stall, 4/11 gears, all prof built. Dyno tuned, estimated 430 hp at engine, has not been drag raced or street driven since the build, I have driven it in parking lots. It runs and drives great. New C&R radiator, electric water pump, new fuel tank and high volume pump. New steel floors, new polished aluminum firewall, diamond plate alumimum truck bed, new tires, new American racing wheels, two new Hoosier slicks on matching wheels. Prof. built full roll cage, new Corbeau race seat, new 6 point harness, fire extinguisher, second frame installed for passenger seat. New headers, exhaust with electric cutouts. Windows are Lexan plastic. I have some seals and a set of front fenders with the sale, rear fenders are available online. The stamped Willys logo”
No pics provided.
https://baltimore.craigslist.org/cto/d/annapolis-52-willys-jeep-project/6817507655.html
“52 Willy’s Jeep. Clear title. Rolling chassis needs new body tub. New frame and body parts. Original transmission and front/rear ends. New suspension, wheels, tires, steering box etc. Buick iron V6 at engine builder. Finish motor yourself or have him build to your spec.”
UPDATE: **SOLD** Was $4800.
(03/18/2018) This runs and drives, but could use some polish.
“1954 Willy’s Pickup, 4 Wheel Drive, 134 F head engine, converted to 12 V, Runs down the road without a problem, has turn out hubs, recent brake work and rebuilt carb. Some rust in the cab corners and bed. A variety of spare parts and wheels included.”