This 1974 Winter issue of Jeep News may have been the Jan-Feb 1974 issue.
1967 Jeepster Convertible Lawrenceburg, IN $10,000
This looks like a good price.
https://www.facebook.com/commerce/listing/732417875108065
“10,000 OBO
1967Jeepster, 4 wheel drive, Dauntless 225 V6, odd fire, 3 speed trans. Factory power top. Has 1971 Dana 44 rear end 3.73 gear. Solid vehicle. Everything works, gone through mechanically, very dependable. All wiring gone though and fixed.
New
Convertible top
Gas tank & fuel lines
Brakes and brake lines
Master cylinder
Radiator
Heater core
Windshield
And much more
message with any questions”
1952? CJ-3B Bonney Lake, WA $15,500
This looks like a good build.
https://seattle.craigslist.org/see/cto/d/bonney-lake-1952-cj3b-willys-high-hood/7583527933.html
“Got a 1952 CJ3B Willy’s high hood with a tbi injection 4.3 V6 turbo 350 automatic overdrive 44s front and rear Detroit rear air locker front 538 gears new tires blazer front springs over the top Dodge Rear Springs over the top full cage new aluminum radiator warn winch tow bar stainless grill, stainless tailgate, Ricardo black buckets, all the lights work heater clear title
1964 CJ-3B Sandy Springs, GA $14,500
Nice half soft-top on this 3B.
https://atlanta.craigslist.org/atl/cto/d/atlanta-1964-willys-cj-3b/7581873687.html
“1964 Willys CJ-3B. The last year of the flat fender.
It had a frame-off restoration in 2006, to include a brand new tub. Overall, it runs great, is cranked once weekly and is a great driver. It has NO rust anywhere, which is a very rare find.
It’s not perfect – for most of us Jeep (and Willys) enthusiast, it’s as nice as you or I have seen, but the paint is not show quality. If you’ve been around them, you know it drips some fluids.
It does have a heater and newer canvas, and the interior is in incredible shape (will post more pictures).
What does it need? It currently has a Solex carb with a flat spot (still very manageable to drive). I have the correct Carter carburetor, but it needs rebuilt, which is a $250 or do dollar investment to have done right. It also comes with the PTO winch but does need a shaft.
Come take a look – you’ll be impressed. It comes with a clean title and bill of sale.”
1952 M-38 Aurora, OH $15,000
Greg and Tom shared this Kubota diesel powered flattie. There are no pics of the engine included.
https://www.facebook.com/marketplace/item/496716685953123
“Up for sale is my 1952 Willys M38. This jeep has a Kubota V2203 Turbo Diesel Engine installed with a full kit from Overland Diesel out if Canada. The jeep runs and drives great. It also has the disk brake conversion from Brennans Garage. It has a T90c transmission and a lock rite locker in the rear. It has led headlights, aluminum radiator, full 2 inch exhaust, new shocks etc, tightsteer installed and 32-10-15 tires on it. It also has an (arctic) hard top original for the m38. This jeep has thousands of dollars spent on it. Full specs available if serious”
Kayline Swingout Tire Carrier Lexington, SC $250
Looks in good shape.
https://columbia.craigslist.org/pts/d/lexington-jeep-willys-swingout-tire/7579334898.html
“Vintage Kayline Swingout Tire Carrier
Center tire mount with jerry can mounts on each side.
Tire mount is adjustable
Fits Jeep CJ models
Mounts to the round corner of Tub.
All parts are present except for hardware to bolt to tub.
I would not put a tire on it larger than a 31″
This would be a great addition for an Early CJ project.
Pickup only in Lexington SC”
1947 & 1948 CJ-2As Marthasville, MO $8000
It appears both bodies have some rust.
https://stlouis.craigslist.org/cto/d/marthasville-willys-jeep-cj2a/7575664232.html
“1947 Willys Jeep CJ2A vehicle runs but needs brake work. Have owned vehicle since 1975. This offer includes a 1948 parts jeep. Parts jeep’s engine does not run, but has many good parts and a decent body. Will provide vin #s to serious inquiries. 47 has a fold out windshield. Has lock out hubs on front. A new odometer was put in when vehicle was overhauled about 30 years ago. Vehicle used mainly on property. Please call for more information
$8000 OBO”
1963 CJ-5 Winchester, VA $600
Given the Meyer half-cab, there looks like some value here.
https://winchester.craigslist.org/for/d/winchester-1963-willys-jeep/7581890264.html
“1963 jeep NO MOTOR, NO TITLE 600 obo need it gone trades welcomed”
1948 CJ-2A Green Springs, OH $10,500
This militarized CJ-2A looks solid, but it does have a few unusual features, including the fuel inlet and steps.
https://columbus.craigslist.org/cto/d/green-springs-jeep-1948-willys-cj2a/7583749331.html
“1948 Willys CJ2A for sale. It was restored in the late 1980’s by my father. It has an olive drab paint finish, as well as olive drab canvas upholstery on the seat cushions and backs. My father converted the electrical system from 6 volt to 8 volt. The body tub is custom fabricated from steel. The grill and fenders are original. The hood, windshield frame, and tailgate are all original with the embossed Willy’s name. After the restoration, it was only driven in local parades, car shows and local events. We have stored the jeep under a cloth cover, inside a building since my father passed in 2004. We have recently replaced sparkplugs, points, condenser, fan belt, fuel pump and battery. The fuel tank has been professionally cleaned and is in excellent condition. The carburetor has been rebuilt. It has fresh oil and coolant.”
Hub Loks Hubs Whiteville, NC **SOLD**
UPDATE: **SOLD** Was $175.
These are very hard to find hubs which I believe were manufactured by the Dana-Spicer Corp
“Original vintage late forties – early fifties Willy’s Jeep Locking Hubs
10 Spline Dana 25 Axle
Appear to be in working order.
Will need good cleaning, lubricating, and new gaskets.
Have been in my garage in dry storage for more than 25 years.
I’m cleaning up and they need to go.
I have a Paypal account and will ship if you pay shipping.”
1946 CJ-2A Elmira, NY $7500
Some work’s been complete, but it will need more work.
https://elmira.craigslist.org/pts/d/big-flats-1946-willys-cj-2a-project/7584676248.html
“1946 Willy’s cj2a project
Should be finished this summer. You pick the color raptor liner.
Rebuilt trans, axles, tcase, new shocks, brakes wheel bearings, Drums, shoes. Rebuilt driveshafts. Engine was not rebuilt. Ran smooth and quiet. Good oil pressure. Ground up build.
Sell as is for 7500
Sell finished this summer 12-15000.
Body is 80 percent rust repaired.
Will be painted in may and start reassembly.
Chassis is 90 percent complete. Have parts to finish. Front axle bearings. Steering.
Have registration.”
1946 CJ-2A Maryville Greenback, TN $4000
It’s a project.
https://knoxville.craigslist.org/cto/d/maryville-46-willies-flat-fender/7580956376.html
“1946 willies flat fender jeep project, The jeep was running and drving when I pulled it in the garage 30+ years ago and you can see the progress ! Lost intrest ! Pulled it out yesterday and it needs to go ever thing is there doors fenders automatic transmission windshield frame running boards lots of extra parts,,make me an offer ! Not rusty , title in hand !”
1948 CJ-2A Meeker, OK $5000
This was formerly listed with a 3B, but I guess that sold?
https://oklahomacity.craigslist.org/grd/d/meeker-jeep-cj2a-willys/7577454536.html
“1948 runs and drives We use on our farm last two years I have put all new tires, shocks, front springs, shackles, brake cylinders gas tank fuel pump, alternator, battery, headlights rest of jeep is 75 yrs old beat up little not much rust. Still not fully restored works great for us This is my price I have looked for years to compare 5,000 they have every thing you can think of wrong with them check it out see what you find maybe another state IF INTERESTED TELL WHAT YOU ::::: WOULD PAY ::::cash only FIRM BOTTUM $”
1963 CJ-5 Winchester, VA $600
Given the Meyer half-cab, there looks like some value here.
https://winchester.craigslist.org/for/d/winchester-1963-willys-jeep/7581890264.html
“1963 jeep NO MOTOR, NO TITLE 600 obo need it gone trades welcomed”
Year? CJ-3B? w/ Unusual Parkette Body Blue Ridge, GA $2500
UPDATE: Still Available.
(06/22/2021) Given the front clip, this might be a 3B chassis, though the Parkette body is a low-hood version.
The seller is correct about Paul Parker and the body. But, I believe this is the first version of this particular style that I’ve seen. It lacks the side stripe, has fender extensions, has a little different PARKETTE design on the back, has an extra wide lip around the rear, and looks like it has a side step. Very interesting.
https://nwga.craigslist.org/pts/d/cherry-log-willys-jeep-with-parkette/7574690350.html
“Rare, rare, rare. 48/49 Willys Jeep with Parkette fiberglass body. Believed only a handful made while Paul Parker was back in Georgia. This one is a bit odd as it doesn’t have the “line” above the fender but it does have flared fenders; the Willys nose panel is original equipment. Not sure it’s on the right size frame at the moment but we do have an original Willys bare chassis on the property we can work into the deal.
Engine/trans present. Very cool project. Needs finishing. No title. Bill of sale only. If the ad is up, the Willys is available.”
1949 Jeepster Gardiner, ME $10,500
UPDATE: Still Available.
(12/07/2022) Has some older updates.
https://maine.craigslist.org/ctd/d/gardiner-1949-willys-overland-jeepster/7573935311.html
“49 Willys Jeepster with mid 50’s Cadillac V8 and automatic transmission. Older amateur restoration. Has heavy plate steel floors. Recent convertible top and side curtains. Fun cruiser. $10,500 Brown’s”
Racer Update
Once the water got fixed (found a retired local plumber who still does small jobs and did previous work on our house, so that worked great), I returned to the cage.
The front “loops” have been bent and added, along with a top and mid cross bar. I also added one side bar, with the other almost ready to spot-weld in place. Unfortunately, I ran out of materials, so I need to get a couple more tubes.
As you can see below, I found a seat placement I like. My head rests just below the top of the seat, so plenty of room for a helmet. Now, I just have to figure out how I want to mount them. I was going to weld in the seat frames, but I think I am going to bolt them. This will make it 1) easier to install the floor pan and 2) allow me to change up the seats/position if I’m unhappy with how it feels.
Oct-Nov 1974 Jeep News
Here’s another Jeep News. This one has the months, but not year. I used some article details to estimate it is from 1974.
CJ-2A Al-Toy on eBay ($50)
This buy-it-now CJ-2A Al-toy isn’t perfect and has some funky tires, but looks like a good price.
View all the information on eBay
“1 PIECE CAST METAL JEEP AND UNBRANDED. VERY HEAVY. ITS AWESOME. HAS METAL STEERING WHEEL AND COLUME. Has custom ERTL wheels and tires. Look closely at pictures because this is the item you will get.”
Unusual Willys Jeep Service Decal and Postcard
These two odd items with popped up on eBay. One is a Willys Jeep service postcard and the other is a Willys Jeep service decal. Both are related to Rednor and Rainear, a Willys dealer in the Trenton, New Jersey, area. The decal has already sold, but the postcard is still for sale.
This decal has already sold:
1947 CJ-2A Aguanga, CA $7000
May be worth a look.
https://www.facebook.com/marketplace/item/871730844028752
“Willy Jeep 47 Runs good”
1950 CJ-3A Chicago, IL $11,900
Looks in good shape.
https://www.facebook.com/marketplace/item/1138559547016138
1950 Willy’s.. Lots of updates in the last 2 months: New Carburetor. New Choke system. Rebuilt Alternator and Belts. New Radiator New Headgasket. New plugs New Water Pump. Battery cut off Installed Starts every time and drives very well.”
1961 CJ-5 Canon City, CO $3800
UPDATE: Price dropped to $3800.
(12/24/2022) Might be worth a look.
https://www.facebook.com/marketplace/item/2135850793251975
“V6 been rebuilt. Standard 4×4 had pto. Brakes gone through all new fluid in gear boxes. Front end tight.”
1947 CJ-2A Loveland, CO $7695
UPDATE: Price dropped to $7695.
(12/26/2022) Seller will consider a trade for this modified 2A.
https://www.facebook.com/marketplace/item/662150855703868
“47 Willy’s 350 Chevy 3sp Dana 30 front with disk brakes full floating 44 rear with hubs 5.38 gears locked front and rear hard to stop also have turbo 350 and nv4500 trans with adapters obo or trade maybe cj7 or ????”
1952 M-38A1 & 1948 CJ-2A Alger, MI $6200
The 2A is a parts jeep.
https://www.facebook.com/marketplace/item/2273086989520606/
“1952m38A1,1948parts jeep plus extra parts canvas doors gage ect.all included”