emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $2500.
(10/04/2013) This CJ-3A has the same fiberglass seats as Biscuit.
“53 Willy’s with 283 bored .06 over T90 trans with overdrive 5:11 gears front and back brakes are redone new oil pan gasket hoses starter motor runs strong only thing is needs a gas tank tank is rusted”
UPDATE: **SOLD** on eBay for $455. There’s a discussion about it on the CJ-3A Page.
“Koenig Model R100J Forward/Reverse PTO Winch. It mounts directly to a CJ2A, CJ3A or CJ3B, with the integral mounting bracket. PTO is off of the crankshaft pulley. This winch is off of my 1949 CJ3A and is very unique and rare; in fact I have never seen another one with this type PTO. This may be just what you need to make your restoration a one of a kind. It is in excellent working condition with the exception of a broken ear on the engagement lever and that part is available on the internet.
Included are the winch with integral mounting bracket, engine bracket assembly for PTO and lube block. The winch is complete and works but the PTO is missing the parts noted below. The missing parts will have to be machined. There is a company who reproduces a similar sliding clutch assembly for Land Rovers that may adapt. Note – The pictured engine IS NOT included and was used to illustrate the mounting of the engine PTO bracket only.
Not included:
Sliding clutch assy. (coupling winch to crankshaft nut)
Roller Fairlead
Cab Control lever assy.
Roller Chain (between sprockets on winch and PTO bracket)
Please contact me if you have any questions, I will be happy to answer them.”
Ann’s been in a quilting mood lately. And, when she gets in a mood, she gets productive. She’s sewn together around 10 quilts of different types in the past couple of months. Recently, she started looking for flat fender fabric (who could that quilt be for?), however all she has found is “Tugger” patterns.
Anyone ever run across flat fender quilting cloth?
Here’s the Tugger swatches. Ann found this one of a flying Tugger:
Bill Dedo contacted me yesterday. He’s hoping to track down a 1949 CJ-3A of his that his mother sold years ago. He has learned it might be a restoration project in Alta, California. If you happened to have any leads, add a comment to this post.
Here are some photos:
UPDATE: The winner is Anonymous at $200. Thanks for the unexpected response everyone and a special thanks to Steve Vogelzang for making it happen!
Steve sent me this original 1960 FC-170 manual in the hopes its sale would raise a little money for eWillys. One of the unique things about this brochure is that it appears to have been in a Chevrolet engineering library. There was one of these available on eBay for $45, but that one is now gone. I’ll start the bidding at $30.
Along with the brochure is an FC-170 brochure. These run between $5 and $10 on eBay.
This was up for auction last Saturday. I wonder if it sold?
http://www.auctionzip.com/cgi-bin/auctionview.cgi?lid=2006879&kwd=willys&zip=&category=0
UPDATE: **SOLD** Was $3500.
(12/13/2014) Both are projects.
“I have two Willys FC170’s for sale. I would also consider trading even for a J series pickup truck or a toyota 4×4 truck. I have 3 of these forward controls and I have come to realize I will never fix up all 3 of them. I am keeping the one I have the most money and time in and letting the other 2 go. They are projects and I have not messed with either of them or tried to get them running. They are both fairly complete with enough to make one complete truck if you combined the two easily. The orange truck is in really nice shape body wise (if I had got it first I would have used it as it is worlds better than what I am working with). The green truck has some body damage but its not very rusty either. Both are flathead 6 with the t90 three speeds and dana18 transfer cases. Green one is 1959 and Orange is a 1960.”
UPDATE: Still Available
The CJ-2A looks in good shape. It may go quickly. It is priced at $5,580, but you can also make an offer.
“Great running and fun to drive. Has current tags and inspection sticker. This jeep has been completely gone thru mechanically in 2013. Over $3500 spent in 2013. All new brake system in 2013. All wiring redone throughout for lighting and brakes. All guages working perfectly.
Transmission works in all low and hi settings. Engine runs very good and starts on first try. New battery installed in Jan 2014. Please call 214.802.6624 with questions.
Can provide more pictures as requested. Can ship anywhere in the USA.”
View all the information on eBay
These photos appear to have come from this Danish website: http://www.armyvehicles.dk. It took some searching to find them.
Charles sent this as well. I can’t remember if I’ve posted this before or not, but it’s worth a repost:
The envelope is ripped, but the picture is great. It looks a lot like a slat grille.
“For sale is an envelope that would have been used for a soldier’s correspondence during World War II. It features a cartoon of a soldier driving a jeep. This item is copyright 1942 by Porto-Server of Chicago. The graphics are great; the envelopehas been torn at the end opposite the cartoon.”
I’ve seen these in chrome, but never in gold.
“Gold Jeep vintage ashtray in excellent condition. $85.00 OBO.”
http://toledo.craigslist.org/clt/4316311855.html
A friend of mine is looking for the following hard-to-find parts for his farm jeep. He’s a serious buyer, but not real good with the internet, so has asked if I would help him try to find them. He’s willing to pay for shipping (using Uship) from anywhere in the US.
– Newgren lift
– Newgren single plow (or any other implements with tag)
– dual wheel adapters
– Koenig pto twin stick (50 & 58)
– Koenig half cab (complete and with tag)
Email me if you have something dave @ ewillys.com
UPDATE: **SOLD** Was $800
This runs!
“Runs good needs a water pump and radiator just rebuilt the carb it has a three speed transmission with all time 4wd it has high and low”
UPDATE: Still Available
(10/16/2013) “48 Willys with 350/350, must II, ps, pb. Very little rust with no rust on floors. 15k miles on motor and tranny. Would trust to drive anywhere.Runs and drives great.”
http://lincoln.craigslist.org/cto/4356817753.html
UPDATE: **SOLD** Was $2500
“1950 M38 — military version of CJ3A Willy Jeep. Original engine and drive train with modern upgrades. Runs good. 12v electrical system. Larger front brakes. Warn hubs. 6 point roll cage. Full soft top (with doors). Tow bar and wiring. Rear step bumper. Stewart Warner gauges. Bucket seats. Near new BFG mud terrain tires, 2 inch spring lift, ubolt skid plates. Solid metal and frame. Clear title and registration. Buy it before I change my mind.”
UPDATE: Was listed at $3300. **SOLD**. It has been fixed up and is now listed here.
(11/18/2013) “I have a 1948 willys cj2a for sale. I have had it for a couple years and been fixing it up to run around in, but don’t drive it that often. It has a new radiator, hoses, thermostat, carburetor, fuel pump, fuel tank, brake lines, shocks, tires, clutch and just has primer right now. Includes some seats but will need to be mounted in the passenger side. There is a few dings in the body but overall decent shape. It is a 3 speed shifts good and doesn’t kick out of gear 4wd and low/high both shift and work.”
The title lists this at $3. I assume it is $3000. The hardtop looks good.
“1959 willy L134 engine 3 spd ENGENE RUN REAL GOOD BADY NEED WORT HAR TOP CONPLETE DOOR”
http://southjersey.craigslist.org/cto/4316084980.html
UPDATE: **SOLD** Was Make Offer
“Alright CL, up for sale is my ’49 CJ2A. It’s got a 4 cylinder flat head and 3 speed tranny. Little background, I was given this by my grandfather a few years ago before he died, I had the intentions on making it a project for myself, but it’s just gonna take too long for me. It’s a restoration, not a project. Before I was given it he primarily used it around the property, my uncle told me he rebuilt the motor and tranny a few years before it was given to me. It doesn’t run now as i let it sit, i’m sure with new plugs, a carb cleaning and some fresh gas it will though. I always loved this thing so I’m not gonna let it go for dirt cheap, they’re not too easy to come by, but I also know it’s no museum peace,the body is pretty bad. Frame is surprisingly decent. No seats or seat brackets, when i first got it the seats were shot so I cut them out and planned on welding in new brackets for larger seats, but never did. It was always in a carport until last year when the snow destroyed it. Now it has multiple tarps over it. Look up what these go for, and make an offer.”
UPDATE: **SOLD** Was $2850.
It needs some parts.
“No engine or transmission very little rust, windshield has a nick in it. rear glass good, door glass cracked. awesome wheeling project. Tim Allen just paid 40000 for a completely restored one in Arizona. clean colorado title”
UPDATE: Status Unknown. No price.
Engine needs work.
“1947 CJ2A Willys Jeep – Has hard top, wide wheels, back seat. Does not run right now, but when ran blew blue smoke. Have extra engine – needs crank polished and put back together. Other than the engine, all original and body in good condition.”
UPDATE: **SOLD** Was $1200.
The engine turns over, but isn’t running at the moment.
“I have a 1949 CJ3A With a new clear Title Its been sitting in a shed since the late 80’s. I purchased this with the thought of a restoration however I’m starting to think I’ll never be that interested in it. Its a Numbers Matching CJ Original Willy’s-Overland L-134″Go Devil”4-cylinder iron block T-90 transmission and Dana 18 transfer case, a Dana 25 front axle and Dana 41 rear axle. The frame and drive train are solid Body on the other hand needs work. Everything is there someone fixed all body sheet metal once from the Fire wall back looks like it was made out of 14 gage its heavy with no holes but will need completely replaced if your doing a restoration. Windshield frame is rusted up with some holes came with a hard top and doors also in bad shape but the right person could fix. Has CJ5 Seats and someone along the line cut a hole in the hood for a vent or something. I’ll be honest for a 1949 that was well used its not that bad. Its painted olive drab but looks as if it may have been red from the factory. drive train turns and everything shifts engine turns and from prior owner says it was running like a top when he parked it. I’m not sure if he is even still alive. I’m asking 1200 for everything this would break me even. If your looking for a nice project this is it. Only serious inquiries. I don’t have allot of time to screw around with showing this to everyone and their brother.”
UPDATE: **SOLD** Was $1000
It’s a parts jeep or project.
“1952 willys with a very good tub and frame. has original axles and body and frame. has a m38a1 grill. the person i bought it from had motor mounts for a smalll block chevy and partial boxed frame. i dont have time for the project so figured its time to sell it. no engine trans or transfer case.
call or txt mike”
No pics provided.
“Hello I have a 1959 cj5 willys jeep for sale. This is a project car and does not run but would be great for someone with any mechanical skill. It comes with all the parts to make it run again and extras. It also comes with a spare hood. This is incomplete and does not have an interior and signs of age are apparent on the sides and floorboards. So if you have some time and bondo you could make a wonderful jeep. Call or text me anytime at 8563273712. You can also email this posting if preferred. All trades considered. Throw me an offer and il gladly reply. My name is Jason.”
UPDATE: **SOLD** Was Make Offer.
Bob spotted this interesting parts truck.
“1958 Willys Truck Bed for sale
Very good shape
Has spare tire mount
Have 4×4 rolling chassis also and drivetrain
Will Separate”
UPDATE: Was $12,500. **SOLD**
(01/18/2014) Looks good. Includes a PTO Welder! No pics of it provided.
“1962 Willys Jeep. CJ-3V 134F Engine. Fifty miles on frame off restoration. Aluminum top included. Extremely rare PTO welder that sits in the passenger seat.”
