Nice tailgate, but the price seems a bit on the high side to me.
“This is a original OEM jeep FC series tailgate for the pickup. It has never been installed and is a new surplus factory part.”
Nice tailgate, but the price seems a bit on the high side to me.
“This is a original OEM jeep FC series tailgate for the pickup. It has never been installed and is a new surplus factory part.”
UPDATE: **SOLD** Was no price.
Steve spotted this ad. The jeep runs! This might be worth a look.
The jeep is located at D&L Metal Recycling.
UPDATE: Was priced at $5000. **SOLD**
(09/01/2012) This may be worth a look.
“1947 Willys Jeep in very good condition. 4 cylinder engine. Non-military. Runs good. Body is in great shape. Hardly driven. Comes with 8000 Pound Warn winch. $5000 firm.”l
This looks like a good price.
“Rare and very cool 1952 M38 vintage jeep. Call for details. 208-610-5249”
UPDATE: **Status Unknown** No price listed.
The front fenders are fiberglass, but looks solid.
“1947 CJ2A Willys Jeep
ORIGINAL tub, drivetrain, frame.
Has fiberglass front fenders, and has some bondo in tub, taillights and running lights are not correct. No Data Plates (frame or firewall).
This Willys has the optional Running Boards/Steps and the PTO with Rear bumper hitch platform.
Also comes with newer Besttop Top and Doors. New Battery and cables, New Oil lines to filter, Fresh Oil Change. Also comes with a bumper tow hitch for bringing along to parades or car shows (drawbar).
This is a rivet – bumper CJ, built 1947-50 following WW2. It is a pretty original survivor. Not a show truck, but it stops, runs & drives well and can easily be fully restored or just maintained as is for another 66 years! Currently registered and driven regularly. Inspection welcome from serious parties, but no tire kickers! Not giving it away, call for info.”
The looks like a good price.
“A set of 5 turbine wheels and tires that came off of my Jeep Scrambler. Bolt pattern 5×5.5. Tires are mismatched and only good for rollers, not road use. 4 wheels are the same and one(the spare) is slightly different. Should fit Jeep CJ5, CJ6, CJ7 and CJ8.”
There appears to be value here.
“1947 CJ2A frame with rear axle and suspension. 1947 body, fenders, tailgate, grille with 1952 (1-piece glass) windshield frame. Floor replaced by previous owner. Some body filler from previous repairs, some filler just added.
Good body/project for rat-rod, rock crawler or Jeep that is going to be used. If you’re looking for a pristine body, this ISN’T IT.
call Dan at 313-580-444six”
No pics provided.
“Have a 55 willys wagon no title has rust 1200 text for more info 360 4904341 Dave”
UPDATE: **SOLD** Was $1350.
(02/28/2013) This looks like a good price. It runs.
“This would make a good hunting or farm jeep. It has the flathead 4 cylinder and standard transmission. The motor and trans are both good and four wheel drive works just fine. The block has been welded on but does not leak. I have a starter that I just had rebuilt that needs put back on it. It may need a carb kit to run real good but I had it running before we took the starter off. It’s kind of just an old hunting type buggy. The seats in it are good and the inside is in reasonable shape. It does need some work on the floor pans but it’s nothing that makes it not usable. I check email daily so just reply if you have interest. I can only provide a bill of sale but it has the Willy’s ID tag on it if you want to go to the trouble of registering it. I’d also entertain using it as partial trade towards a ’09 or newer Honda Rancher, Foreman, or Rincon 4X4 with reasonable hours.”
Notice the track and the guide below the front of the jeep’s bumper. This photo came from Mission4Today.com
“Several students at Page Field in Fort Myers (ca 1945) with a jeep, the mechanical mule of the army that carried a target around on a circular cement track. The jeep itself was protected by a large embankment in the background. The students are over the right side of the embankment and shoot at a target.”
UPDATE II (09/11/2013): Brian and Bruce each sent a photo. See below pink surrey photos.
UPDATE (09/10/2013): Brian shared these pics of a Surrey with a Kelly hardtop. He bought the hardtop, but not the jeep.See Brian’s pic and info underneath the pink surrey hardtop photos.
Unfortunately, there’s no description. Only the date of July 1965.
View all the information on eBay
(09/11/2013) Brian sent this photo of the door after it was sand blasted.
(09/11/2013) Bruce forwarded this photo of the surrey without the top.
(09/10/2013) Brian’s photos of a 1961 DJ-3A Surrey:
Brian writes, “It’s not the same Jeep. My top has never had an i.d. tag on it which i always thought was odd. When i bought the top, the Jeep was only in Florida for a year or two at the time. Before that it was in Virginia where it had spent most of it’s life, the same State that the top was built in. The story was something like: a lady bought the Surrey new in ’61 and then (i think) it was sold to a serviceman around the time of Vietnam. He put the Jeep in storage and it sat there for well over 30 years, hence why it was in such good shape. I can’t remember who had the top put on it.
I found two more pics that show a bit of the pink paint, in the rear cargo area some is showing on the ribs and the front floor shot shows a line of pink around the body seam. I had underhood pics that showed alot of pink paint that the cheaper paint didn’t adhere too well to but i can’t find them.“
This ad depicts a Bantam BRC-60.
“From a 1941 issue of The Saturday Evening Post, this is an ad for Champion Spark Plugs with art by Vickery. Illustrated are 8 uses for Champion Spark Plugs:
1. Bomber, Trainer, Airliner or Light Plane
2. Tanks
3. Reconnaissance Car or Jeep
4. Motorcycle
5. PT Boats of the Mosquito Fleet
6. American Industry
7. Farm Tractors
8. Trucking Industry
13 5/8″ x 10 1/8″
Excellent condition”
I found Poker Flat, California, but I couldn’t locate a “Poker Flats”. Anyone recognize the town?
Lynn has a in-dash nav system that isn’t working for him, so he’s hoping to trade it for some jeeps parts (cj-5 drivetrain parts). He’s located in Iowa. If anyone is interested contact him at pastorlynn@esthervilleumc.org
UPDATE: **SOLD** Was $4950.
It’s funky, but appears in good shape.
“Running gear is from a vintage CJ2A. Body custom built. Equipped with stock 4 cyl engine, 3 spd trans, hi-lo range and 4 wheel drive. Mechanically strong, good tires. Good title and vintage plates. A lot of fun to drive and to look at. Good business mascot, parade vehicle or use on you acreage, at the cabin or lake.”
UPDATE: **SOLD** Was $20,000
Well-built jeep with a negotiable price.
“I am selling my 1946 Jeep Willy’s at this time. This vehicle is in pristine condition and it is impossible to find another vehicle in such good condition. This vehicle has the following upgrades + more professionally installed:
Steering System
Disc Brakes
Rhino Lined Interior
Battery
Front Axel
Alternator
CB
Radio
Radiator
V8 Engine 327 Small Block
Wiring
Fuse Panel
Seats
Roll Cage
This vehicle has additional upgrades and the price is HIGHLY NEGOTIABLE AT THIS TIME. If you have a vehicle for trade or an interest in this vehicle please respond directly to this add and I will e-mail or call you back. I am in Fresno and happy to meet anyone at any time to show the Jeep.”
UPDATE: **SOLD** Was $2000.
This Parkway Conversion wagon looks like a good price.
“Clean title in hand
Good engine
Good transmission”
UPDATE: **SOLD** Was $12,500.
It looks in good condition. It has a MB/GPW passenger fender. The drains holes might be filled as well (I can’t quite tell).
“Fully restored, excellent condition, 12v, includes, like new top, tow bar, roll bar, misc. parts. If interested, contact me for more info.”
Here’s a built truck.
“1953 will’y p/u, ONE OF A KIND!! lifted and sitting on 40 inch procomp tires, dana 60 front, w 4:10 gears, locker, warn hubs, hd cover, gm 14 bolt rear, disk drakes, 4:10 gears, locker w hd cover and pinion protector, new lifted springs, hd shackels, 350 motor w 270h cam, steel heads w bigger valves and smaller cc’s, eld brock int, holley 600 carb, headers, alum rad w elec fan, opt battery, 400 turbo trans w convertor, 208 transfer case, roll bar w lights, alum tool box, winch frt and back with warn 8500 winch, that works in frt or rear, fab frt and rear bumpers, brush graud from a hummer made to fit, led tail lights, whole truck coated in rhino line, black, new baja seats, custom door panels, custom made console for upper cab, metal locking console between seats, custom made visor outside of cab, radio, new speakers, hd carpet that can be washed, autometer gauges, 22 ga fuel cell, inclosed in a ss tank, w frame mounted fuel fitler, Truck is in very good shape, runs and drives very well, cross over steering, no shimmy or shake down the road, Please serious only, i dont want trades and no low offers, i have spent alot of time and money on this truck and really dont want to sell, buying a house. Thanks for looking. call or tex 908-577-6551. Ray”
Here’s a good looking Jeepster.
“I HAVE FOR SALE MY 1949 WILLY’S JEEPSTER. I PURCHASED THIS JEEPSTER ABOUT 7 YRS AGO FROM A GENTLEMAN IN OHIO. ACCORDING TO HIM THIS VEHICLE ORIGINATED IN CALIFORNIA, THEN MADE ITS WAY TO FLORIDA , THEN ON TO OHIO, AND THEN TO WISCONSIN. THE GUY I BOUGHT IF FROM HAD DONE MAY REPAIRS TO IT IN THE PAST; BUT THE SELLING POINT TO ME WAS THAT IT WAS A DECENT DRIVER. OVER THE YEARS THAT I HAVE OWNED THIS JEEPSTER I WILL LIST WHAT WE HAVE DONE TO IT.”
It runs and drives.
“59 Willys in overall great shape for the year. I got it in 2006 from a guy that last ran it in 1972. It sat in his garage for 33 years. I replaced the following parts with quality brands such as Omix-ADA , Wagner, timken, federal mogul, four wheel parts hardware, quadratech, ect.
New fuel tank, fuel lines, pump, carb, master brake cylinder, 4 wheel brake cylinders, shoes, spring kits, brake lines, drums, seals in front and rear diffs, tapered bearings on ball joints, rebuilt engine, clutch and pressure plate, high volume oil pump, water pump, points, plugs, coil. Ive Gone through everything mechanically. Just needs some bodywork, I havent done any body work, it was fiberglassed in the front floor pan area back in 70’s spare tire mount area on passenger side rear quarter panel. Body isnt that bad. I have used the jeep since 2007 putting on maybe 500-1000 miles per year. Could use rear springs, as there stock and have flattened out a little. Frame is excellent and painted black from years ago. Ive got thousands into the jeep, your getting a lot of jeep for $2500”
UPDATE: **SOLD** was $5000
“1949 WILLYS CJ3A JEEP
REBUILT MOTOR
NEW FLYWHEEL, CLUTCH, PRESSURE PLATE, THROW-OUT BEARING
FRAME AND BODY ARE CLEAN AND PAINTED
NO RUST
WHEELS, TIRES ARE 15-INCH
NEW STARTER, HIGH-TORQUE 12-VOLT $350.00
RUNS AND DRIVES”
UPDATE: Was $1500. **SOLD**
Given the extra body and engine, this ex-Navy CJ-3A might be worth a look.
“Bought this jeep to build up but I have too many projects for this winter. Its a 1950 Military/Navy issued jeep. It has seen better days and has been layered in some spots with thin aluminum. Motor does not turn over but I have a good running motor and transmission/transfer case that is included. Also included is another complete 1949 Willys CJ3A body that can be put on or used for body parts. The Willys is very complete but needs a lot of love. Great father & son or daughter project! No Trades I need cash to finish other projects I have. No title for the navy jeep they did not title them when they were decommissioned.”