emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $2500.
(04/24/2012) I like the vintage look of ‘Wirick’s’. Given it doesn’t runs, the price is a bit high.
“Selling my 1956? Willys jeep. MUST SELL!
Asking $2500/obo. Very little rust.
Easiest to come look at it. It hasn’t ran for a while…don’t think it would take much to get it running.
Great project!”
UPDATE: Price dropped to $3000
(02/13/2012) One runs and one is a parts vehicle.
“I’ve got two Willys Jeep Station Wagons for sale. I’d like to sell them as a package for $3500. The ’57 (red) runs, the ’58 (green) was bought as a parts car but there is enough extra parts to build it also. If you’re looking for a project with real classic looks, this could be it! Both are Hurricane flathead 6cyl, with 3spd tranny, 4WD and I’ve got the transferrable registrations for both in my name. I’ve just got too much on my plate, so I need to deplete the fleet a little. If interested, Call Joe at (516) 996-6820”
http://longisland.craigslist.org/cto/3161951332.html
UPDATE: **SOLD** Was $4500.
(06/19/2012) The passenger side has seen some repairs.
“Runs Good.
Original motor-12volt system
new top
makes a great hunting jeep or a great start on a rebuild.
body in good shape”
UPDATE II: Price dropped to $3995. http://eastidaho.craigslist.org/cto/3173547560.html 406-240-8961
UPDATE: Still Available. Please review this thread before contacting the seller: http://www.jalopyjournal.com/forum/showthread.php?t=682338 as it appears this jeep is being sold by the same person (the ad displays a phone number which links to his name).
(06/18/2012) This look alike a to-good-to-be-true ad. Possible scam.
“1955 M38A1 Willys Military Jeep with only 50 K original miles, very solid, no rust holes, runs and drives good with original 4 cylinder engine and T-90 3 speed transmission.Has front turn signal black out lights still intact and drivers side rear black out light included, data plates on dash still intact. Brakes work, heater works, good clutch, turn signals and lights work. Has original seat frames with back seat and original canvas top and gerry can stamped US. Original style side curtains and doors are available new reproduction to match top. Own a piece of history. easy to restore or use as is, with original title from 1977 when purchased from army surplus. Has been converted to 12 volt.”
http://eastidaho.craigslist.org/cto/3173547560.html
Here are several photos of a Lavatory Jeep. I wonder how many of these were made? You can read more about this and other Aircraft Ground Support at the CJ-3B Page.
View information about this photo here
UPDATE: **SOLD** Was on eBay
Here’s a neat ad for the Scheneker Iron Works Dozerette.
UPDATE: **SOLD** Was on eBay.
The seller also has a few more things, such as 5 combat rims for $500, that he will sell to the winner of this auction.
“Offered to the highest bidder, this WWII-era Ford manufacturered GPW 1/4t Utility Vehicle (JEEP) serial number 125,686 with a build date of 7 June 1943. Perfectly restorable tub and frame with the complete running gear from the transmission back along with plenty of “F” marked parts. The serial numbers of the tub and frame match along with the title so all that’s missing is the original motor. The front floor and lower firewall to include the axe patch , radio junction box and the radiator crossmember need replacement but from the machine gun mount back it’s sold including the hatchannels, tool box wells and back bumper. I have not inspected the transmission, transfercase or drive lines and pumpkins for functionality but I assume they will clean up nicely once all the road debris and accumulation of grease and dirt has been wire-wheeled off.”
No location listed.
“Runs! Starts right up. Tires are good. Custom roll bar. Converted from 6 volt to 12 volt. New starting gear. Bought as a project Jeep and I just do not have the time.
Price: $4,000
Please contact Jon or Jeanie at: email: jeankeppler@cox.net”
http://www.warjeeps.com/bd/sale/adwb247/adwb247.html
UPDATE: **SOLD** Was $5000
Looks like some rust on the driver’s side, but otherwise appears pretty solid.
“This is a 1943 Ford GPW I picked up in 2008 with intentions to restore. I don’t have the time it needs and need to clear up a little space. The pictures show it needs some body work. We have a new fuel pump for the Jeep that goes with it. It comes with the windshield, a rare back seat. The fuel tank leaks and we tried getting it fixed. The engine is free and the seller put fuel in the carburetor to fire it up and it turned over in 2008. Buyer will have to apply for a lost title on this vehicle. I do have the bill of sale around from the auction it was purchased”
UPDATE: **SOLD** Was priced at $1000.
The engine on this has been rebuilt. It runs.
“48 willys Jeep, engine has been rebuilt, it does run, but the steering box is bad, and obviously from the pics it does need work. But, its all original, and mostly just surface rust. It was my dads, he put a new windshield, taillights and headlights in it, and did take it gopher hunting a few times. I know its worth something to the right buyer, it will have to be loaded on a flatbed to haul it out..”
UPDATE: this appears to have sold. It was priced at $3500.
(07/24/2012) This looks solid. The dash appears rhino-lined or textured.
“48 Willys CJ-2A Jeep been in family since 48. Power take off winch , 91 chevy 4speed stick, 1964 small block V-6 engine, soft top, 31×10.50 R15 BFGoodrich tires, runs good.”
I just thought this was interesting in that it looks parked in the middle of nowhere. Of course, to be fair, Elko is in the middle of nowhere. That means that Ryndon is even more in the middle of nowhere.
“1951 Jeep Willys Wagon For Sale
No Engine, Transmission, or Transfer Case.
Buyer must pick up as I do not have a trailer to haul it.
$350 Or Make offer”
http://elko.craigslist.org/cto/3159106870.html
No pics provided.
“1949 Willys CJ jeep has undergone an extensive frame-off, nut and bolt restoration and is ready for its next assignment. Call Phil at 715-456-0036 for more information.”
UPDATE: **SOLD**
I can’t tell which is the parts truck and which is the ‘good’ truck.
“We have two 1958 willys Trucks for sale. One runs the other is for parts.”
UPDATE: Was listed at $1500. This is Steve Carters’ rig. It does include a short block, but no heads. This was Gary Rich’s El Coyote, which some older PNW Jeepers might remember.
The springs have been out boarded in the back.
“1950 willys race jeep currently setup for v6 but scatter shield has been drilled for v8, comes with 350 short block, t-10 four speed w/ advance early adapter to dana 18 offset transfer case. 44 tapered offset rear. dana 44 front with 30 ends, two desert dogs on super offset wheels, buckshots in the front. does not come with a body.”
http://seattle.craigslist.org/see/cto/3158439915.html
UPDATE: **SOLD** Was $4000
Mark just listed this over at sellajeep.com.
“1959 CJ-5 with a 327 Corvette engine from 1962. It has new tie rods, all new electrical, new front and rear seals on the engine, 3″ lift and newer tires. The body is in excellent condition and has no rust. The transmission does need some work.”
UPDATE: **SOLD** Was No Price.
(06/28/2012) The serial number on this is #13346. The column shift is gone, but the full floaters appear to be there (and is one of the last few made before they eliminated that feature), along with the tool indents.
” * * * TRADE, SELL * * * Whatever……. I’m open to anything. Guns, planes, motorcycles, cool unique cars, trucks.
I purchased this 46 from my engine builder who had this in his barn for 10 years. This was one of @ 10 jeeps used on his property as a hunting vehicle. When I bought it it had the newer model engine in it with a cut in the hood to allow the air cleaner to protrude out the top. He had an original flathead completely rebuilt on a crate wrapped in plastic that came with the deal. You have to know this guy, his machine shop is insane and his quality of work is tops. As I said, they have a bunch of these willys on this property over the years and this was his last one. His intent was to fix it up and out this rebuilt flathead in it. The newer model engine originally in the car when I purchased it apparently ran but was way down on power according to my guy when he drove the Willys into the barn. So I never messed with this engine. Out it came and in went the rebuilt flathead engine. I purchased over $1500 in parts from Ron Fitzpatricks jeep parts. New Carb, new brake master, new engine mounts, new steering piviots and all the parts from the box to the wheels (less the actual rods). New Hood. Had the fuel tank and radiator cleaned but I’m not happy with either of those jobs. Had the starter and generator completely gone through. Brand new 8 volt battery. New Distributor, all new air box and complete system to the carb. New Fuel Pump, New water pump and clutch plate and throw out bearing. New gas peddle and all new linkage to the carb from the peddle as well. New choke cable and new ground wires. Actual Mileage…… HA who knows. . . . ”
UPDATE: **SOLD** Was $4000.
(02/22/2012) This looks solid.
“Runs drives and stops, needs a little tinkering to be great. 1951 willys jeep, new carb, new master cylinder, new winshield, new steel spare,new fuel pump, new manifold gasket, good tires, good paint, turn signals, guages work, gas tank repaired, 8000# warn winch, good seats, also have fleece seat covers in the package. no toop or doors tranny slips out in 3rd when you let off gas, needs shift fork adjusted. $4000.00 no tire kickers or BS.”
UPDATE: **SOLD** Was $2800.
(0718/2012) This has what I believe are clamps from a Porsche in place of the windshield clamps.
“Im selling my 1948 jeep willys cj current registration, pink slip in hand, it has a great running 283 chevy motor with 202 heads newer edelbrock 600cfm carb starts and runs excellent, muncie m-21 4 speed trans with dana 18 transfer case, stock front dana 25 diff, and i chrystler 8.75 rear diff, gears do not match so the 4 wheel drive does not work yet but the trans and transfer case work great so its as easy as making the gears match, i bought this jeep 2 years ago and was gonna fix it all up but theres just not enough room for the kids. the jeep is drivable i cruise it around all the time and its a blast to drive it has plenty of power!! i put the new offroad seats in a year and a half ago,new fuel tank,new fuel pump,new master cylinder,brakes work good,all gauges work,its definatly a project but its a great start you could go hit the trails in it now no problem.. looking to get $3000 obo or may consider trades full or partial trade let me know what you have.”
UPDATE: Still Available
(07/03/2012) This is very much a project.
“46 flat fender willys project w/a small block v8 chevy engine, i started but cant finish…. dont have the time or the money… it ran when i started tearn it down and good, the thing will climb a tree. it has all original window frame and tail gate both say willys, have roll bar and bench seat for rear. i have everything that was in it… dash, gauges, all of it…its all there. would really like it if someone was to take and finish what i couldnt do my self hate to see it go but thats it….1500.00 i dont wanna ask for to much but i do think its worth more but putting it back together is most the work hence the price, or trade for something cool, call me w/ur ideas of trades or cash,
360 670 8811
jason”
http://seattle.craigslist.org/kit/cto/3159082498.html
UPDATE: **SOLD** Was $950.
(06/05/2012) This might make a good custom project.
“Not sure of year, no title. No grill or seats. Ford 6 cyl 3 speed. Chevy car rear end. Missing passenger window. Some rust and dents. Great rod material.950 obo. Will consider trades. No emails or texts”
UPDATE: **SOLD*** Was $1900
(07/15/2012) I believe this runs? It also has a bed extender. While it looks like it is missing the tailgate, Leo noted that tailgate is still there, just under the extender.
“1953 CJ3A Willys Hight Hood , farm model, Mfd. half cab, box extension, snowplow. Recent overhaul. Body is rusty, Great for parts or restoration, No Title, former owner is still looking but has not produced it at this time, therefore sold as salvage. $1900.00 , I have no more time for any projects,Will trade for items of interest. Sold in as is condition, 605–270-1252”
http://marshall.craigslist.org/cto/3158596687.html
UPDATE: **SOLD** Was $4000.
(09/03/2011) I’m not sure the frame and body goes together very well.
“AFTER MARKET 33 willys coupe chassic set up for sbc and 350 turbo or 4 speed .8.8 in rear end w/ 3.73 posi …gasser straight axle front end front…. fiberglass body, hood , fenders is a 1948 cj2 kit from jc whitney … front motor plate, drive shaft, wheels & mickey thompson tires included”
UPDATE: Was on eBay. **SOLD**
Bill unearthed this from eBay. The Genius Sno Balls FJ-3 Truck is for sale. It lacks a motor. It also doesn’t steer.
“Custom built snow cone truck with Southern Snow shaved ice machine, freezer, roof a/c, custom 20″ wheels & tires. This truck does not have an engine nor does is steer. It is an enclosed snow cone trailer that needs to be trailered to events. Very light weight. Plugs into 30 amp 110v electrical plug. Turns heads at all events!!! $9995 FIRM! ”
This Roberto Flores illustration was commissioned by Mike Hardesty, for http://www.jeepchasm.com/
See the entire process at Roberto’s website.
