emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
I can’t tell if this is a CJ-2A body that has had the drain holes filled and the tailgate covered up or a ww2 body with a filler inlet added.
“Very good condition”
http://burlington.craigslist.org/atq/3021394309.html
From the decals, it appears to be a UN Farm Vehicle stationed along Route 66. How it reached Canada is less certain.
“4WD, NEW TRANSMISSION,RUNS WELL. REPLY HERE OR CALL DAVE AT 604.510.1417”
http://vancouver.en.craigslist.ca/rds/cto/3016107886.html
I like the little toy/pedal(?) jeep.
“New tires 12 volt otherwise mostly original.From southern NM no rust,tool box good spare seat frames and heater. Call Tod 970-406-2033”
http://denver.craigslist.org/cto/3019396606.html
UPDATE: Was listed at $7500. **Status Unknown**
This is a nice looking combo.
“For sell as a set only, a restored 1956 Willys CJ-5 Jeep, plus a Bantam trailer (jeep trailer, civilian). They were restored at the same time, painted to match. Same tires and wheels. The Jeep has a metal half cab, (doors easily lift off for summer driving) Ramsey winch, Warn overdrive, heater, new hubs, custom rack on back to hold extra spare tire, gas can, hi-lift jack, and shovel. The rack can be easily removed. The jeep has the original spare tire mount on the right side of the body. For sell as a set only, I will not split the trailer from the jeep. The jeep has just a few miles since the restoration, the trailer has not been pulled at all. Very nice set. Only selling to pay medical bills (new baby in the house) They are sitting on a lot in Vale, Oregon, as I live way out of town on a ranch. $7,500.00
Plenty of surface rust, but it doesn’t appear to be a rust bucket.
“1947 Willys Jeep complete with newer 4 cylinder motor. Original PTO Driven wench on front end is in fairly good shape was garaged for few years. ran when parked. No title.”
http://springfield.craigslist.org/cto/3019597572.html
UPDATE: **SOLD** Was $4900
This appear solid, though there are some rough patches on the side.
“CJ2A
Military generator motor with less than 1000 total hours.
12 volt with GM alternator
All new,rebuilt, or gone through.
Extra parts.”
UPDATE: **SOLD** Was $3500
This needs some work. I don’t see any tool indents, but it does have a column shift.
“1946 willys jeep this is three on the tree colum shift with over drive this jeep is stock very rare runs great needs brake work some wiring”
Here’s a nice CJ-3B.
“1. The Jeep is a 1953 CJ3B Willys.
2. I purchased the Jeep on June 1, 1971 and have had it in restoration and garaged ever since.
3. The engine is a Buick V6. Probably from the 1960’s or early 1970’s
4. The steering is a Hudson.
5. Cutlass hubs.
6. Dual headers and side pipes.
7. Taillights from a 1965 Ford Mustang.
8. Chrome custom dash.
9. Total restoration.
10. Half Moon hubs and chrome wheels.
11. Leather High Back front seats.
12. All Steward-Warner gauges operational including tachometer.
13. Candy apple red metal fleck custom paint job.
14. Carpeted interior.
15. Runs well.
16. Multiple gears sets. (three speed transmission, Hi Lo range, overdrive)
17. Serviced as of June, 2010. No significant mileage since:
New battery
Oil filter
Spark plugs
Rebuild carburetor
Alignment
Oil change
Tune up
Detail
Call 720-289-8179 or respond by craigslist email”
http://denver.craigslist.org/cto/3018565169.html
UPDATE: **SOLD** Was $2500.
Runs and drives and appears solid.
“I HAVE A 1950 WILLYS JEEP IT RUNS AND DRIVES BUT IT DOES NEED SOME BRAKE WORK IT HAVE THE ORIGINAL ENGINE AND LITTLE TO NO RUST. CLEAR AZ TITLE CALL ME”
UPDATE: **SOLD** Was $2000
This might be a good price.
“have 1968 jeep cj6 runs need little work”
This appears solid, but may have been patched along the passenger side.
“1952 m38 runs great call Bill 240 994 7299 will not respond to emails”
http://washingtondc.craigslist.org/mld/cto/3019112816.html
UPDATE: Still Available
(03/24/2012) This looks solid.
“Runs great. Most of original equipment. Show only on Anderson Island”
http://seattle.craigslist.org/tac/atq/3021090602.html
UPDATE: Price droppd to $2500.
(05/06/2012) It runs.
“I am selling my 1952 willys jeep. Runs good.original flat 4 motor. 3 speed 4×4. Plow included. New clutch and all new wiring 12 volt system. New exhaust. New tires. Has title. Call Craig at (920)660-3681 with any questions.”
http://appleton.craigslist.org/cto/3021268873.html
UPDATE: **SOLD** Was $1250.
(04/20/2012) This runs and drives.
“1957 Willys Jeep runs and drives been in storage complete jeep great for restoration.”
UPDATE: Price dropped to $3000.
(09/30/2012) Those rear wheels are pretty small.
“55 willys rat rod make offer (805) 423_1350 may trade ”
http://slo.craigslist.org/cto/3019671269.html
UPDATE: **SOLD** Was $400
(04/11/2012) Well, the steering wheel looks salvageable.
“Selling what I think is a 50 Willys CJ3A Jeep, good V8 project, its been lifted and sides are 3/16 steel, has good transmission, no engine, grille and radiator are good, hood not included. $400”
During my last visit to my parents’ house, I tried starting Biscuit. The engine would turn over, but wouldn’t fire. It didn’t take long for me to figure out that the electric fuel pump no longer worked. So, I decided on my next visit I’d change from the electric to the stock manual pump.
Today, I took on that project. While a very simple changeover in theory, the practice turned out to be more of a challenge than I expected. For example, the first step in the process required me to break into my tool box, as the keys to my tool box disappeared during my move last summer. After spending an hour searching for the keys, I finally gave up and ‘removed’ the lock’ (with hammer, screw driver, and little finesse).
It was surprisingly easy to remove the lock. However, it was surprisingly difficult to get the lock portion of the drawers to unlock. I won’t bore you with the embarrassing details, but let’s just say that it took us about an hour and half to finally get the tool chest unlocked. Oh, good times!
Next, I had to start pulling off the electrical pump and installing the manual one. It just seemed like I dropped every socked a hundred times, grabbed the wrong wrench with each reach, had to search through the barn to find rarely used tools I had stowed away, and more. Nothing seemed to be easy about the project.
Finally, about 5pm, Ann wandered out to see how I was. I was not good. The socket has just slide off my socket wrench extension again, which meant I had to climb down onto the tarp, scoot under the jeep, and retrieve it, again. I shared some choice words about Biscuit with Ann. She decided to take a picture and post it on Facebook Here is the picture and what she wrote:
Today, under a cloud of tools, grease, and a broken fuel pump came the flood of curse words and the exclamation from Mr eWillys.com himself…. David Eilers “hates Jeeps” 🙁
It took me until about 7pm, but I did finally get the fuel pump installed and the hoses attached. Even better, everything worked. So, now Biscuit and I are all lovely dovey again.
So, I’m done with jeeps for today. Updates tomorrow.
Paul sent this to my inbox today. A couple days ago he removed his stainless steel body from his frame so he can complete the work on his frame. It’s a good thing he listened to his intuition!
“I spent a few hours yesterday in the connex cleaning up my mess and double checking the security of the Willys body resting on the 2X4 support framework. For the most part I felt the body was safely held three feet above the floor but my mind kept coming back to the thought “Would it stay in position during an earthquake?” Since it’s much faster and easier to add additional support structure than it is to repair damaged stainless body panels I fitted eight more bracing legs to the existing body holder. I really didn’t think any additional strength was necessary but I’d sleep easier with this bit of overkill engineering and the cost in time and money was negligible.
While taking a shower this morning I was surprised when the house started rocking back and forth as several sharp jolts announced the arrival of an earthquake. The quake was a small one, only about 4.6 but it was close to Anchorage (about ten miles away) and it was over quickly. After getting dressed I hurried to the connex, opened the door and viewed a beautiful sight. The Willys body was safely resting on the framework undamaged and perfectly aligned on the supports.
I realize rebuilding Jeeps can be an experience in frustration when money and time conflict with dreams but I really could do without adding earthquakes into the mix. I’m slow enough as it is, I don’t need Mother Nature increasing my heart rate with exciting special effects. On the other hand I’m happy the Willys is safe, the body support held and I don’t have to repair any damaged body panels. Now all I have to do is to hurry to get the frame work accomplished and reattach the body to the chassis before anymore earthquakes visit my workspace.”
Gerald forwarded pictures of this sign (thanks!). While the Willys Wagon is featured prominently on this sign, I couldn’t find any evidence of its existence elsewhere within the restaurant. Layton’s is located in Ocean City, Md, and is supposed to be pretty good according to Urbanspoon.
UPDATE: JUST A REMINDER
Sign up now for the Moab Overland Rally, a tribute to Willys Wagon and Trucks. Click on the picture to connect to the website, http://www.willysrally.com/
On our way home from the WAAAM on Saturday we decided to drive through The Dalles, a small town whose name isn’t pronounced like ‘Dallas’ but rather like ‘The Dallzzzz”. While driving through I took an unplanned turn, then crossed over to a side street where I spotted this CJ-3A (which of course required a few pictures).
UPDATE: **SOLD** Was $1200/each.
It’s a little rough, but plenty of parts there. I can’t tell much about the Wagon.
“I have an antique Willis Sedan and a Willis WWII Jeep. Both were my dads but have been sitting for a long time, both have some parts missing. I would love to fix them both up but I dont have the time two. Im not sure what theyre worth but I know they are both rare so im thinking $1200 or the best offer. You would have to find a way to move them and I can help.”
No pics. Unclear just what this is.
“This is an old cj2a the model is actually a ford. All parts the same as jeep”
UPDATE: **SOLD** Was $4000
It looks pretty solid.
“I have a 1947 willys its n great shape for its age it does run and drive all the factory gauges work nothing has been updated its all original. I don’t have the money or time to restore. Hoping to give it a good home”
UPDATE: **SOLD** Was $3000
Not running.
“Complete truck, not running needs carburetor rebuilt. Couple extra parts. No rust, very nice body. Back bench seat is a little rough, but other than that its in great shape! ”
