UPDATE: **SOLD** Was $700.
This runs!
“1960 willys CJ6 with plow no blade runs needs brake lines and 4X4 don’t work”
UPDATE: **SOLD** Was $700.
This runs!
“1960 willys CJ6 with plow no blade runs needs brake lines and 4X4 don’t work”
This is a project.
“i have a 1948 Willy’s m38. It has a full roll cage and is a rolling chasis and tub. The tub is in decent shape, rust in the usual places. I have a f-head engine with a t-90 dana 18 that i am throwing in with it i have several other parts that will go with it to. It already has a saginaw steering box installed just no steering linkage. looking for 1750.00 or best offer.
my name is michael i am generally busy during the day so text me with any questions. 5037138527”
“Want to buy PTO setup for a Willys CJ2A. Email please.”
UPDATE: **SOLD** Was $1200
(01/27/2012) If it really only needs ‘a little’ engine work, then this might be worth a look.
“1946 Jeep Willys
Need minor engine work
Good project vehicle”
There are thousands of Willys and Jeep items over at eBay, but I’ve never had a chance to create the scripts necessary to sort and list them. However, support from readers allowed me to create multiple ebay-related sections that I think you’ll enjoy looking at as much as I have. You can get to them from the “eBay Listings” image at the top of the right column.
Now, even if I don’t do updates, you can still review hundreds of updated listings from ebay without having to go through ebay searches.
This is the only update tonight (Sunday Night).
BTW, check out this odd ball ebay listing:
This is a nice looking drag jeep. There are more sand drag jeeps here, too.
“1950 Jeep Willys Sand Drag Jeep. This is an original (Titled & Registered) 1950 steel body Willys. It has been professionally rebuilt. It is one of a kind, no expense spared, best parts money can buy.
Fresh (new) 600 Plus HP 355 SB Chevy (Nitrous Motor) built by Denunzio Race Engines. New powerglide transmission built by Remac. New Curry Ford 9 inch rear end. New driveline, steering, front end (2WD). New digital 6 plus MSD computer. New seats, yellow top optima battery. NEW EVERYTHING….MINT CONDITION.”
UPDATE: **SOLD** Was $2000
Roy spotted this unusual jeep. What is this?
“1973 Mountain Jeep $2000.00 ”
This looks in good shape.
“Good bodywork. Full vinyl top and doors. Engine needs work”
” i just recently bought an early 1960s jeep pickup truck called a model fc-170 and mine is missing quite a few parts and i know that theres still some of these trucks sitting around the dallas / ft worth area and are normally in pretty bad shape.
many parts interchange from the early 1960s willys jeep trucks too such as tailgate , rear fenders , lights and switches and etc.
call or email me if you can help at all – thanks so much , steve 972-655-8134″
This appears worth look.
“One family owned since bought new in Socorro. Ran 2 years ago, parked since. New radiator, fuel pump, gas tank and rebuilt carb. Includes original steel cab with doors, electric heater and tow bar. Needs tires, paint and upholstery”
UPDATE: This likely sold. Was for sale at $425.
“I have a 1943 Jeep military body with windshield frame, hood, and partial undercarriage for sale. The front fenders, grill, and hood are in nice shape although they have some bondo, but the body tub is pretty rough. It needs a new floor and side steps, and some other work here and there, but it’s saveable if you have the time. The driver’s seat frame is there, but the passenger’s seat is probably junk. The undercarriage has the frame, the springs, and both axles, the pedal arms, and not much more. The front axle is disconnected and just laying there, but it has the tie rods and is complete except for the drive flanges (or locking hubs if you run those instead of a full- time drive flange).”
No pics, but might be worth a look.
“I have a 1952 willys jeep wagon I want to get rid of. Preparing to move, don’t have time to mess with it and really don’t want to have to move it, but will if I have to. Run’s, battery’s dead at the moment but will take and hold a charge. I’ve been gone overseas for a year and haven’t started it all summer. Would make a great restoration project for someone. 1,500 OBO. If interested email me and I’ll get back to you ASAP. Clear title too.”
This looks in good shape.
“Hi, for sale is my 1952 m38. About 18 years ago it was fully restored. I do not put more than 200 miles on it a year, it stays in the garage year round. It has the origianl F head engine and runs great. email me if you have any questions.”
UPDATE: **SOLD** Was $1750.
There may be value here.
“48 Jeep Willys CJ2a. Good condition, has been sitting in garage for 2 years. Running condition when parked, doesn’t start currently but won’t take much to get her purring again. Come pick her up or I can deliver.”
No pics provided.
“1948 Willys Jeep Body CJ2A good shape with title. 1000.00 OBO Call Dale @ 413-539-0440”
UPDATE: Status unknown. Price was $1700.
It’s a project.
“This is a project that I just can’t seem to finish. No more motivation, interest shifting back to old Camaros.
Here’s what it has:
New frame made from 2×3 and 2×4 box steel, stretched 8 inches (original frame comes with it)
Tub, stretched 8 inches in the cab, no tailgate
Stock flat fenders, grille and hood
Windshield frame with good glass (glass is out) and wiper motors (unknown if they are operable)
YJ springs, spring over configuration
New shackles, spring mounts and spring bushings
Dana 44 rear axle with 5.38 gears (stock)
Narrowed Dana 44 front housing from 75 Dodge, with outers from 85 Power Wagon and new rotors (no axle shafts, unknown R&P)
New Cragar black 8 hole 15×10 rims
New Dunlop Mud Rover 35×12.50r15 tires (rolled in and out of the garage a few times)
76 Chevy tilt steering column with new GT steering wheel
Two high back bucket seats
Buick 231 engine (disassembled, unknown condition, was going to have it rebuilt) with a Holley and Edelbrock aluminum manifold
Ford T18 tranny (unknown condition)
Dana 18 T-case (disassembled, unknown condition)
Has VIN plate and clear title, currently non-op status
With the stretch and the springs mounted to the bumpers, wheelbase is 96″”
No pics provided.
“Great condition Willys MB front seat frames. Large hole fuel fill. Left and Right.
Call 509-674-6054”
UPDATE: **SOLD** Was $2000
(02/11/2012) There might be some good value here, though it needs work of some kind.
“1956 CJ3A Flat Fender Fiberglass Jeep on a 69 CJ frame, Spicer 44, Locker Front End, Straight Thru Transfer Case, Narrowed 9″ Ford Rear Diff, Chevy 350 w/ Aluminum High Rise Holly 4 Barrell, Headers, RV Cam, Turbo 400 Tranny, B&M Shifter. Super Swampers. This is a parts jeep or a major project. Must be trailered home, Located at the Caldwell Airport in a Hangar. $2,000”
UPDATE: **SOLD** Was $6999
(02/13/2012) The number on the hood suggests this is GPW 6209.
“I am helping my boss sell one of his 2 Military jeeps,
This is a 1942 Ford jeep that comes with a correct 4cyl engine with rebuilt trans and transfer case. Has almost new tires, comes with the Willys drop down windshield and an extra Ford Windshield. Seats are excellent no tears or holes, It Has had many upgrades.
Put your own Military paint job and this would awesome. The paint job on it now was done by the previous owner, God knows why !!!!
Runs fantatstic and is registered til Nov 2012.
Stored indoors in Gilroy and if you are interested please call me at 4o8 569 one six five six.
If this ad is up then the Jeep is available so no need to ask, Also I will not respond to emails without genuine phone numbers.”
UPDATE: **SOLD** Was $6500
(09/14/2011) This looks like a good jeep.
“Chevy 327_ complete rebuild and ready to go! ”
UPDATE: Now priced at $500.
(01/23/2012) I’m going to guess this has the tool indents on it based on the seller’s description.
“I have a jeep from the late 40’s for someone who needs the parts. This is one that was made on the same assembly line that made the jeeps for WWII. Email me if your interested. Thanks. jeremiah estes http://s258.photobucket.com/albums/hh244/jestes70/”
UPDATE: **SOLD** Was $1800
(12/26/2012) There’s some value here.
“1946 willys cj2a, mostly complete. Has homemade top. engine locked up. all drivetrain is intact. the trans and transfer case are not locked up. I was going to use it as a parts vehicle for the 47. 1947 willys cj2a. runs and drives however I now have the body off to paint do any repairs needed. Floors have been replaced on the 47. many new parts included, ie…..new master cylinder, wiring harness, back seat, ect. Jeep is apart and needs to be reassembled but all bolts are in bags and marked. Extra windshield frame is also included. This jeep has been converted to 12 volt by previous owner. Everything I have for this willys go with it. Email for extra photos. $1800.00 OBO. Both for one money. Will not seperate, having just one does me no good.”
UPDATE: **SOLD** Was $1000
(01/03/2012) I’m wondering if this is a fiberglas body? The driver’s seat and steering has been moved to the middle.
“1949 Willys Jeep no title. Dana 60s axles, this is a project that needs just a little work to be finished, has transfer case and turbo 350 transmission, will include running big block 454. Started as a project don’t have the room and wife says it has to go.”
I spotted this drawing at Fortitude.com. It is a car website, but had a forum thread of drawings.
http://forums.fourtitude.com/showthread.php?5197057-Amazing-drawings-by-car-fan