To Top

1955 M-38A1 Indianapolis, In $1250

• CATEGORIES: M-38A1 • TAGS: This site contains affiliate links for which I may be compensated.

It doesn’t run, but appears pretty complete.

“55 jeep . Needs restored. Has been in a barn fire some time in its life. has the two front seats and the rear bench. motor is free and i can get it to turn over. selling as is with bill of sale. email at coopscars@comcast.net or call 317-797-1985. $1250 or make me an offer.”

http://indianapolis.craigslist.org/cto/1814995882.html

 
To Top

1957 FC-150 Cedarville, Oh eBay

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

UPDATE: After more than a year this is back on eBay with no reserve.

(06/30/2009) This FC comes with a warn overdrive.

“UP FOR BID 1957 WILLYS FC 150. I BOUGHT THIS TRUCK 13 YEARS AGO FROM THE CITY OF YELLOW SPRINGS, OHIO. IT WAS USED AS A WELDER TRUCK IN THERE CITY VEHICLE FLEET SINCE 1964. IT HAD A LARGE PORTABLE WELDER ON THE BACK WHICH WAS REMOVED WHEN I BOUGHT IT. I MADE A STAKE BED FOR IT THAT HAS REMOVABLE SIDE RACKS. IT HAS 28000 ORIGINAL MILES BUT THE TITLE SAID 46000 WHICH WAS A MISPRINT. I NEVER BOTHERED TO GET IT CHANGED. THIS TRUCK IS 100 PERCENT OPERATIONAL AND EVERYTHING WORKS BUT THE HORN. IT IS THERE, BUT THE BUTTON FELL OFF.”

View all the pics on eBay

 
To Top

1967 Datsun Patrol Reno, NV **SOLD**

• CATEGORIES: Other 4x4s This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1200

I know nothing about these.  However, a quick search seems to confirm the seller’s information.  Moreover, this appears to be a good price for a rather rare rig.

“Selling my 1967 Datsun/Nissan Patrol. If you do a little research on this only around 2,600 of these awesome 4×4’s were imported throughout the mid 1960’s and here is one of the rarest. Most of the Patrols brought into the U.S. were badged as Nissans, but this is badged as a Datsun. It is completely original with the original 6cyl and manual transmission. Has a folding windshield and a rare removable hardtop. It is a project vehicle but is mostly complete except for the front seats and rear window glass, I do know someone with the front seats I can connect you with. It is not running at this point but the motor does turn over. Truck needs some TLC and you would have a very unique 4×4 unlike any you see out on the trails.”

 
To Top

1948 CJ-2A Chewelah, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2000.

(06/18/2010) Dan’s on a streak tonight.  This looks like a fine price that includes a hardtop and softtop.

“I can NOT take any trades for this Willys. 55,858 original miles. She was completely undercover in a carport for last 30 years with very little in town miles, as it was used as a snow plow only which now it is not. 2 Tops – Sears catalog hardtop with doors and soft top (needs some work) with doors.

Last summer this is what was replaced: Completely new brakes, starter solenoid, seats recovered with Marine grade vinyl so that they are waterproof. We hade a tune up performed 6/21/2010 to replace the coil, coil wire, distributor cap, rotor, condenser, points & spark plugs. This is still a 6 Volt system.

This really is a classic car and as much original as is possible for a 63 year old vehicle. She does have some rust holes in the floor boards but not very badly. There is also some rust on the side steps. We are forced to sell is the only reason we are selling so that is why I can NOT take any kind of trade. I can email you other pictures if you would like.”

 
To Top

1967 CJ-5 Bandera County, Tx **SOLD**

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $900

(06/25/2010) That looks like a good Warn winch on the front.  This might be a great price because of that.

“Great project jeep, do not have time to get it back in shape, last running 5 years ago. Comes with soft top and doors, quail rack, warn hubs, tow bar and winch. dauntless V6 motor. First $900 takes it all!”

 
To Top

Zen and the Art of Geometry

• CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.

I blame my mother.

Had she not very kindly given me some cash to do ‘whatever’ I wanted for my birthday, I wouldn’t have gone to the Jungle Jims on my birthday.  I wouldn’t have pulled those springs off the truck.  I wouldn’t have installed the springs, that lead to the vibrations, that drove me crazy all month, that forced me to pull apart Biscuit’s entire rear end and redo everything – spring pads, shock mounts, and the transmission undercarriage.

So, a simple 1.5″ lift thoroughly disrupted my entire month. How’d this happen?

I blame the recent emergence of geometry.  You see, 20+ years ago geometry didn’t exist.  Or maybe it did, but somehow, in someway, my 1st jeep was enveloped in a geometrically-free zen-like zone where geometry didn’t apply, because I never had the problems I encountered this month, despite the fact I set up everything else nearly the same.

What am I rattling on about?  I’m talking driveline geometry 101.  Unfortunately, I was busy the day they held that class. So, I set up my driveline in the same manner I did my old one:  My driveline angled straight out from my pumpkin (with the pumpkin angled at the transfercase like the way it should be done when a CV joint is used), with the only angle at the transfercase.  I probably put 10,000 miles on my last jeep without issue.  So, why would I do anything different with the new jeep?

Well, everything worked on Biscuit, until I put the 1.5″ lift.  But, that little change caused the angles to change enough that the driveline was vibrating my socks off at certain speeds, which is a pretty good trick since I normally wear shoes while driving.   So, as I detailed a couple weeks ago, I thought I had solved the issue by using an angle shim to adjust the angle of the pumpkin.  However, after driving it a few times, i realized this wasn’t a fix at all.

So, last week I decided it was time to do it right, to tear off the old spring pads and start from scratch and change the angling of the transfercase output shaft and the input shaft of the pumpkin to make them the same. Here were the steps.

1) Remove rear end and remove old spring pads and shock mounts and then drink beer.
2) Build new spring pads.  More beer.
3) Connect everything back together to test the driveline angle.  Uh oh, I discovered the driveline angle was 30 degrees (ouch), which allowed for almost no flex — not a good thing.  Breathe.  And Breathe some more.
5) After hmmming and hawwing, I decided I needed to drop the transfercase/transmission just over an inch.  So, I removed the undercarriage.  Get energy drinks ….
6) Redo the tranny/tc undercarriage — I had to cutoff the angle piece and weld a new piece onto it. More Beer
7) Reattach the tranny/tc — this resulted in an improved angle, with the tc sloping down 7 degrees.  Skip beer and drink water.
8)Then, I rotated the pumpkin upwards 7 degrees. More water.
9)Next, I pulled everything apart so I could weld the pads. Margarita to celebrate  potential success.
10) Finally, I slipped the rear end underneath and connected everything back together. The result was the driveline now angled 24 degrees. While not ideal, I can live with this for the time being.  More beer …

Today, I finally got Biscuit back on the road.  I have to say, I wasn’t entirely sure that all this work would to solve the problem, but I am HAPPY to report that not only are all vibrations gone, but also the noise I was getting during deceleration has disappeared as well. So, next week I’ll be heading back into the hills.  The heat is finally here in Boise and all the snow should be gone from the trails.

Now, while I blame mom for a torturous month, it motivated me to fix everything correctly.  Thanks Mom!  And apologies to Robert Pirsig for the blatant theft of his book title .. Zen and the Art of Motorcycle Maintenance.

Here are a few pics (honestly, I was so mad about having to tear all this stuff apart that I didn’t document this too carefully).

Here is a pic of the rear end pulled. I’m about ready to remove the spring pads:

These are the new spring pads made from 3″ x 2.5″ tubing.

Here’s the undercarriage before I cut off the angles.  You can see the replacement angle sitting on top of the carriage.

Here I’ve cut off one side.

Here it is complete. The result is the undercarriage drops everything just over an inch.

And, here it is finally back together :-).  And the body leveled out just where I want it.  Who would have thought a simple lift would cause soooo much trouble!

 
To Top

1947? M-38 Aloha, OR **SOLD**

• CATEGORIES: M-38 • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  Was $5250. **SOLD**

(06/19/2010) This looks like a good price on what appears to be a M-38.

“1947 CJ2A Jeep MB38 in GOOD CONDITION.”

 
To Top

1949 Jeepster Lake Tapps, Wa $9,950

• CATEGORIES: Jeepster • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE;  Price dropped to $9950

(02/05/2010) Here’s a nice looking Jeepster.

“1949 Willy’s Overland Jeepster, Runs great! Has a 289 V-8 engine, automatic transmission, CD Player (w/detachable face), power steering, power brakes, cloth top convertible w/side curtains. Extra grill and headlights come with it. Great start for a collector vehicle or addition to the ones you have! Is in very good condition but not perfect. Was asking $15,000.00, then reduced to $12,000.00 and now $9,950 OBO- we really need the space in our garage so our loss and your gain! Also open to trade for: toy hauler, trailer for hauling, snow blower, orv / atv Only serious inquiries please and if this posting is still up then it is still for sale! Call Tim @ (253) 405-6328”

http://seattle.craigslist.org/tac/cto/1814467007.html

 
To Top

1946 CJ-2A Phoenix, AZ **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2200.

The grille suggests this is a later model CJ-2A.

“All 4 wheel cylinders have been rebuilt.the cluth slave cylinder has been rebuilt. Replace the cylinoids.has new battery. 4 wheel drive. 5.25 gear ratio in rear. Dana 22s under it.runs good, drives good.entire tub has been rhino lined. Just needs bikiin top.clean title.”

 

 
To Top

1963 CJ-6 Vail, AZ **SOLD**

• CATEGORIES: CJ-6 • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $700.

This looks like a great price.  It’s got a nice, old Meyere half top.  The body appears solid.

“1963 Jeep Willy’s CJ-6. 3 speed 4 cyl. Needs work and all offers will be considered.”

 
To Top

1947 Truck Illinois **SOLD**

• CATEGORIES: Willys Trucks • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  This sold.

Here’s a nice looking truck.

“1947 willys pickup. New tires, fuel tank & sending unit, New fuel pump, New water pump & belt. Nice truck. $6500”

 
To Top

1947 CJ-2A Marshalltown, IA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD*** Was $300

“Jeep is very rusty, has no title. Mostly drivetrain parts, axles, transmission, transfercase, engine is stuck. Asking $300.00 No e-mail or text,”

3UPDATE: **SOLD*** Was $0

 
To Top

1949 CJ-3A Charleston, SC **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000

“1949 Willys Jeep project. Partially disassembled. Grandfather left it to me, but I have far too many projects right now. Has flat head four and twin lever transfer case. Has some patch panels and will need some body work, but how many 60 year old jeeps don’t? My grandfather had it running off a boat gas tank when he first bought it before he got cancer, but said that the carb needed rebuilding. Would make a good project. $1000 obo.”

 
To Top

1959 Truck Mishawaka, In **SOLD**

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

This looks like a good truck for the price.

“1959 WILLYS TRUCK FOR SALE, 258 6CY T400 QUADRA-TRACK T-CASE, DANA44 REARS SITTING ON 79 JEEP J10 FRAME, TILT WHEEL POWER STEERING AND BRAKES, YES IT HAS A KILLER HEATER TOO,BUT NO AIR. ANY THING ELSE GIVE ME A CALL. STEVE 574-217-1180 CALL ANYTIME. REASON FOR SELLING HEALTH IS GETTING POOR.”

 
To Top

Wanted: CJ-2A or 3A Tub in Dallas

• CATEGORIES: wanted This site contains affiliate links for which I may be compensated.

“I am looking for a jeep cj2a or cj3a tub with a title. Send me pictures and a price and I will get back to you.”

http://dallas.craigslist.org/dal/wan/1808035518.html

 
To Top

1953 CJ-3B East Liverpool, Oh eBay

• CATEGORIES: CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  This is back on eBay.

(06/20/2010) This jeep has some character.  Note the image that shows ‘the relief hold’, which used to be the gas tank inlet.

“This is a very cool old willys with a neat history. This 53 Willys Jeep Cj3B was restored 15 years ago and used as a pace car and push start vehicle for cloverleaf speedway till it was shut down. It has cool vintage paint with hand drawn pin-striping, with some weather checking for that old school rat rod look. I have tried to keep it as original as possible, and still make a capable 4×4 wheeling vehicle out of it. Here’s a quick break down of it:

Solid frame, no major rust and most of it still has paint on it! Body has no rust showing, but has had bondo and fiberglass repair in the past. It is solid, but not a show truck! Front and rear tow points already attached …”

View all the pics on eBay

Continue reading

 
To Top

1951 CJ-3A McAlester, OK **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** was $600.

(06/24/2010) This looks stock and needs some work.

“All original . Continetal 4 cyl engine rebuilt but gets hot. Has usual rust. needs some TLC Would make a great project to restore or rock crawler. Has no top. would trade for 1969 camero to restore..”

 
To Top

1952 CJ-3A Yacolt, WA **SOLD**

• CATEGORIES: CJ-3A, Racing • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4800

I’m sure this is a fun rig.

“1952 willies drag/play jeep, 16.5 rear paddles, sand steer tires. 500 +/- horse 350 chevy, turbo 350 tranmission and 205 trasfer case. 9 inch ford rear end with heavy duty ladder traction bars. full role cage with new 5 point harness system. external rear radiator with high volume electric fan. I have a 2800 stall converter but not yet installed. price is half of invested cost. ready to play.”

 

 
To Top

1951 CJ-3A Sisters, OR **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3800.

This may have a Dana 30 front and Dana 44 rear.

“It runs and drives has a soft top the motor is a 350 Chevy it has a 400 turbo auto tranny the running gear has been up graded to a CJ5 the paint is in great shape, this is a nice project for the self restore”

 
To Top

1957 CJ-5 Atlanta, Ga $1400

• CATEGORIES: CJ5 • TAGS: , This site contains affiliate links for which I may be compensated.

This looks in pretty good shape, though I suspect there’s some rust underneath.

“THIS IS A 1957 WHILLEYS JEEP ALL ORIGENAL WITH METAL HARD TOP AND HEAT 27000 ACTUAL MILES 2 SETS OF TIRES. 1400.00 OR BEST OR WILL TRADE FOR A 16TO 20 FOOT PONTOON BOAT EQUAL VALUE. PLEASE CALL AS IM LISTEN THIS FOR MY FRIEND. 989-785-3693 ASK FOR RAY . PLEASE NO E-MAILS AND NO SPAM AND DONT ASK TO SELL THIS FOR ME.”

http://nmi.craigslist.org/cto/1812177809.html

 
To Top

1948 Drivetrain with a VW body Chicago, Il $1350

• CATEGORIES: Unusual, VEEP (VW Jeep), Scamp, Others This site contains affiliate links for which I may be compensated.

To my surprise, the body fits on there pretty well.

“A titled 1948 Willys Jeep with a 1979 VW body. Sand tires, chrome wheels.Rebuilt drivetrain. Wife says it must go. 773-490-9747”

http://chicago.craigslist.org/nch/cto/1812954474.html

 
To Top

2 1946 CJ-2As LIttleton, CO **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500.

Here are a couple jeeps for sale. The purple CJ appears to have a replacement body.

“ALMOST 2 JEEPS $4500.00:  1946 CJ-2A Licensed and titled with almost a second in additional parts.
I?m finally admitting I don?t have the time to continue with my project so I?m selling both of my Jeep projects.

The first Jeep is licensed and titled; it has an assigned title from the State of Colorado, and is running. The engine smokes a lot (rings) but otherwise runs quite well. This has very good high back buckets and new tires on aftermarket rims. Original 3 Speed with Twin Stick Transfer Case and a Original Warn Overdrive and Manual Hubs. No Top, and the body has quite a bit of rust. The brakes work but should be gone through before it?s driven on the road. It has some gauges and the speedometer but aren’t not hooked up.

The second Jeep is also a 46-2A that is almost complete but has no engine. This one has a rebuilt (Mile High Jeep Rebuilders) Transmission and Twin Stick Transfer Case, original Jeep Seat Frames and a much better body. The floor has been replaced and is on its rolling chassis with original 16? Jeep Wheels. This one also has manual hubs but again no Top. There is no title on this one.  Additionally, there are some loose/spare parts, an extra windshield frame and a Good Jeep Rebuilders Manual. Additional photos are available.”

 
To Top

1946 CJ-2A Dawsonville, Ga $3500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE:  Pics provided.  A reader has this for sale.

This has updated brakes and an overdrive.

“Running driving 1946cj2a,has overdrive,roll bar,turn signals,runs great no smoke,New bumper,brake lines,master cylinder,has 11 inch brakes,turn signals.original seats has 29k miles..must sell…”

http://atlanta.craigslist.org/nat/cto/1808287762.html

 
To Top

Several Vehicles for Sale Bowden, Ga

• CATEGORIES: CJ5, Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

Here’s a few vehicles for sale.

“1957 Willys wagon 4×4. Flathead 6 cylinder engine. Runs and drives good! All original except new paint, rims, and radio. $3500.00
1974 CJ5 Jeep 4×4. 6 cylinder. Original factory hardtopand owners manual. Always garaged kept. $6000.00
1976 CJ7 Jeep Quadratrac, automatic. Levi edition with new soft top. Runs and sounds great! $4500.00
For more information call 770-258-5080.”

http://atlanta.craigslist.org/wat/cto/1809236595.html

 
To Top

1960 Wagon Terrebone, Or $2500

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

This doesn’t look too bad.

“1960 Willys Wagon jeep. 289 v8, 4 speed trans.. has some rust, but not horrible. runs and 4 wheel drive works. 2500 obo, would consider trades. call 541-4081903”

http://portland.craigslist.org/grg/cto/1811514242.html