I was in the small town of Payette on Sunday and spotted this FC-150 just inside the fence of the TVM Salvage/Recyling Yard. It’s at the corner of 17th Ave N and N 3rd Street. Here’s their website http://www.tvmrecycling.com/ which shows the main office in Nampa.
1954 M-38A1 Aurora, NE **SOLD**
UPDATE: **SOLD** Was $5000
“I am looking to trade my original 1954 willys overland M38A1 military jeep straight across for a pull camper or a rv they both have to be in good shape and the rv must run i need one that will sleep atleast 4 to 5 due to i have a big family when i see it and hear the rv run then i will decide if it’s a deal if you have pics please e-mail them to me the jeep runs it has the original hercules 4cylider motor it’s a 24 volt system so it takes 2 batteries and it’s a push button start on the floor it has a 3 speed tranny and instead of an altinator it has a 28 volt generator all it needs is the brakes worked on and the wiring to the brake lights worked on and a tune up it has no rust on the body or frame the only thing wrong with the body is a dent on the front passenger fender it has new seats and a windsheild.”
1953 CJ-3A Albuquerque, Nm $2000
UPDATE: Price dropped to $2000.
(07/13/2010) This looks like a good price!
“Classic 1953 Willys Jeep. C-J3 It has a rebuilt 4cyl motor. I paid 3500.00 for jeep and need to sell for school money, selling for only $2000.00 firm! So far put new brake master cylinder on it, but it still needs new brake shoes. Everything else works great! Please just call me… I don’t really check my email. I’m usually up late so you may call up till 12 midnight. This is truly a great price for a classic good running Willys Jeep! My loss is your Gain!! 505-288-8479 ”
1953 CJ-3B Phoenix, AZ **SOLD**
UPDATE: **SOLD** Was $1500
The paint doesn’t look very good. It’s got a nice old hard top.
“1953 Willys CJ3B with original hard top. Not a mail jeep! It is not running but does have complete drive train.”
1957 Wagon Citrus Heights, CA **SOLD**
UPDATE: **SOLD** Was $2600.
This appears in good shape.
“Started restoration but did not complete project. Jeep and extra engine and transmission plus two extra doors–everything goes. Seats have been reupholstered. Outside body is painted. All original parts.”
1945 MB Roseburg, OR **SOLD**
UPDATE: **SOLD** Was $1000.
(10/08/2009) This is a CJ body on an MB Frame. There is certainly surface rust, but it looks solid.
“its a 1945 willys flat finder jeep. has military frame and running gear. no rust in tub, tub is strait. have licensing, tags, and a clean title.1,000 dollors, or trade for an adault 4-wheeler atv.”
1948 Jeepster Myrtle Point, Or **SOLD**
UPDATE: **SOLD** Was $7700
This is a nice looking Jeepster for the price.
“1948 WILLYS JEEPSTER OVERLAND STREET ROD. 327 CHEV ENGINE AUTO TRANS. RUNS AND DRIVES HAS HAD PREVIOUS RESTORATION. DECENT PAINT , INTERIOR OK. GOOD TIRES ASKING 7700.00 FIRM NO TRADES SERIOUS INQUIRES ONLY PLEASE. BUYER TO PICK UP ONLY. ”
1946 CJ-2A Rancho Tahama, Ca $2200
This is practically a woodie with all the wood on this rig. This might be a good price, too as I’m betting it runs.
“(posting for my aunt, please reply to jimbo@rtr.net). 1946 Jeep Willys, Aluminum Top, pto winch.”
1960 CJ-3B Canon City, CO **SOLD**
UPDATE: **SOLD** Was $5000
This looks like a good price for this good looking CJ-3B.
“1960 Willys Jeep.. Chevy small block..very fast and tons of fun…. The jeep can be seen in Canon City, Co.”
1946 CJ-2A Alamo, Tx $2500
Can’t see much in the pics.
“Here is your chance to get a great 1946 Willys. It’s a great project build. It does run. Text me for more info 956-358-6046 Rigo ”
1969 CJ-5 Crandon, Wi Make Offer
The body appears a bit beaten up. I wonder if it runs.
“Husband has passed away and I haven’t got a clue how to run this Jeep! The plow goes with it. BEST OFFER!”
1941? CJ-2A? Ellettsville, In $4000
Not one, but two popups in the hood?
“I am updating the willy we have for sale with pictures – 41 jeep willy that we have had for the last 3 years, was running when we parked it, we had plans to restore but we are moving and decided to let it go. Needs paint job and seat restoration. Tried to start it and it wouldn’t start. Only serious inquieries. 812/340-7886”
M-38 Rolling Chassis Keene, Nh eBay
These are some good parts awaiting a restoration.
“This is the one a collector has been waiting for! hard to tell if it was removed from the assembly line! as you will see in the pictures, absolutely no rust now or ever. it has been sitting in storage and needs to go. what you see is what you get! basicly complete body and frame. NO ENGINE OR TRANS/ TRANSFERCASE, NO WIRING, LIGHTS, SWITCHES, GAUGES. all the difficult parts are there though, as you will see in the pics. these models are extremly rare and i’ve been in the jeep business for over 30 years and never seen one like this before. this jeep does not have a title and is being sold as parts only. if you had a rusted out m38, add your powertrain and electrics and you will be done! if not capable, call me. i do restorations. heads up, reserve is around the price of a new body kit.”
1942 MB Las Vegas, Nv **SOLD**
UPDATE: **SOLD** was $1500.
(08/07/2010) It’s missing a carb at the very least.
“For sale, 1942 Willy’s Jeep in good condition. 56k miles, Small block Chevrolet V8, Tittle in hand, Serial number 22608.”
Slat Grille Conversion
Here is a slat grille MB converted into a truck. I found it at the U.S. Military Forum. This was as custom conversion using tin and wood.
1963 FC-150 Chicago, Il $4000
UPDATE: Still Available
(07/06/2010) “1963 Jeep FC 150 cab forward pick up (VERY RARE VEHICLE) mechanicly sound, drive anywhere! Restorable!”
1947 CJ-2A Kingston, Nj $9500
UPDATE: Still Available
(08/19/2010) This build deserves some better pics.
“This show quality Jeep classic has been rebuilt from the ground up. All steel body, and a new NOS original Willys frame. Every nut and bolt has been off the rebuilt. Original motor, trans, transfer and axles all rebuilt 2 years ago. New soft top and redone interior. 5000 lb. winch on front with full roll cage (bolted in), chrome wheels and new tires, too many new and rebuilt parts to list individually. You must see this unique Jeep to really appreciate it. Located at Carlotta in Kingston, call 570-287-5454 for more info. Price $9500.00”
1947 CJ-2A Benson, Az **SOLD**
UPDATE: **SOLD** Was $4500.
(03/27/2010) Lots of good updates to this CJ. Those front hangers are a bit on the tall side.
“Purchase a one of kind with a classic touch. 1947 Willys Jeep CJ-2A Body and Frame.1989 Jeep Cherokee Fuel Injected Engine and Transmission. Dana 300 Transfer case. 5-33″ BFG Mud T/A. Beard Racing Seats with 4 point harnesses. Dana 44 Full floating Rear End with Hubs and Limited Slip. Dana 35 Front End with Disc brakes, Power Steering, and Limited Slip. Custom snorkel. 8000 lb winch. Rancho RSX 9000 shocks. Full flat tow setup.”
Sam creates E-Brake Basic Training
No one can say that Sam and his wife Alecia don’t have a sense of humor. This tutorial had me laughing for a while today!
From Flatfender Willys Academy comes Sam’s explanation of the center emergency brake mod. …. Take it away Sam …
E-BRAKE BASIC TRAINING
2. This is a 78 Merc Capri E brake. There are 3 bolts that hold it in place. The wires are for a dash warning light. The hole to cut is just larger then the width of the fulcrum and slightly longer than the fulcrum travel.
3. The part in the image below goes under the floor and the cables from the rear loop through this cable guide. If the cable is too long, cut to length and use your cable locks. The best location for the brake is close to the seat.
4. This is the housing which is screwed down with screws. Use the housing to determine the location of E-brake.
5. Double check for clearance and reach by working lever up and down. If it feels good, install!
6. This E-brake is from a Hyundai. Most Japanese cars will work, but Ford is the easiest way to go.
7. This is also from a Hyundai, but boot needs to be modified. So you get busy with that E-brake while I give that maggot who shrunk my jeep a major malfunction….FALL OUT!
More Information:
It usually takes about a hour to install with 3 bolts, nuts, washers, and two cable clamps. Once you get the brake installed in the vehicle where you can grab it comfortably, hooking up the cable underneath is a no-brainer, no matter what year it is. I have also used this unit on drum type brakes.
In the image below, I’ve installed a brake in a CJ-3B with a CJ-5 Chassis. The installation is slightly different from that of the CJ2 etc. Total cost of the E-brake and cover at Pick-in-Pull for this project was $5.00. Cost of the clamps (2) and 3 bolts was $3.25 for a total of $8.25.
Comment by Dave …. This is the only other floor mounted emergency brake that I’ve seen. Unfortunately, the pic isn’t that good. But, you pull back on the stick to set it and push the button at the top to release it. You can see the rest of the pics related to this jeep here.
Is this possibly a GP or MA Body? California City, Ca **SOLD**
UPDATE: This appears SOLD, but was listed at $800.
I could be wrong, but the slopes and cut of the passenger and driver’s sides look very similar to a Willys MA, thought maybe a Ford GP as well?. This has been hacked up a bit, but it’s worth a look. Check out what appears to be an emergency brake as well.
“Clear title has orignal old style pink slip non op for 20 years but probably off dmv record now… 4×4 ran when parked 10 years ago”
Year? CJ-5 Gillette, WY **SOLD**
UPDATE: **SOLD** Was$1500.
This looks pretty good. It might make a very good restoration. The seller is calling it a CJ-3A.
“CJ3A Jeep. 4 wheel drive, winch, tow bar, buick v-6. Needs motor wired in.”
1951 CJ-3A San Fernando Valley, CA **SOLD**
Year? Truck Williston, ND **SOLD**
UPDATE: **SOLD** Was $2500.
Intrepid, on-the-go remote reporter Benjamin found a couple of jeeps in Williston, ND. You’ll have to call the phone number to find out more info. Thanks Benjamin!
Flattie Fiberglass Body Longmont, CO **SOLD**
UPDATE: **SOLD** Was $1200.
Just the body is for sale.
“replace that rusty aging body on your cj2a/3a with this brand new fiberglass body including a tilt one piece front clip. body has only been bolted to a chassis and never titled, and is ready to mount on your frame, or buy the matkins extreme frame i also have for sale. email for more information, or come see it.”
1963 CJ-5 Fort Collins, CO **SOLD**
UPDATE: **SOLD** Was $1750.
This comes with a rare bed extender. It is a project.
“1963 Willy’s Jeep CJ5 that we started restoring, Has new 4 Cyl. (F) Head Engine that has “Never Been Started”, New Painless Wiring Harness, Twin Stick Shift Levers for the transfer case, Asking $1750 OBO.
We started to restore the jeep and then my dad had to move back east for work so the jeep was put on hold almost everything you need to get this jeep up and running comes with it,
also has lots extra items to go with the jeep Like an Extra Radiator Clip with Sunk in Head Lights off Early Model CJ5, windshield Frame off Late Model CJ5, Extra Dash Panel, extra Beefier Drive Shafts, and a Bed extension w/Dual Jerry Can Holder, Extra Willy’s Tailgate, also has Military Rear Bumper with Lift Hoops, new Seats and a aluminum Hard Top with Doors.”