To Top

1951 CJ-3A Tehachapi, CA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4800.

(01/07/10) I believe the seller means that this jeep is running a Dana 30 in the Front end and utlizes a SM420 for the transmission.

“FOR SALE IS A 1951 WILLYS JEEP, IT HAS A 4.3 LTR V6 CHEVY MOTOR WITH A SMR4 TRANNY. IT HAS A DANA 18 TRANSFER CASE ,A WARN OVER DRIVE, THE “GRANNY GEAR” WITH THE OVERALL RATIO OF 94 TO 1. IT HAS THE DANA 20 IN THE FRONT WITH LOCK RITE LOCKERS, DANA 44 IN THE REAR WITH THE OX LOCK, cable is broke, IT HAS 538 GEARS. IT ALSO HAS A WARN WINCH,SOFT TOP WITH DOORS, AND EVEN HAS A HEATER IN IT. IT HAS 33 INCH MUD BRUTE TIRES ON 15 INCH CROME RIMS WITH A SPARE ON THE BACK. IT HAS A CD PLAYER WITH 6X9 SPEAKERS. IT DOES HAVE A LITTLE DAMAGE ON THE FRONT PASSENGER FENDER as shown in the pic, WHICH HAS BEEN STRAIGHTEND OUT, OTHER THAN THAT THIS JEEP IS IN GOOD CONDITION FOR BEING 59 YEARS OLD. IT RUNS GREAT AND SOUNDS GOOD TO. IT HAS EVERYTHING DONE TO IT AND IS READY TO GO JEEPIN. MY LOSS YOUR GAIN”

1952_cj3a_tehachapi

 
To Top

1947 CJ-2A South Bend, WA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE:   **SOLD** Was $2200.

(12/29/09) Here’s a highly modified CJ-2A.

“1947 Jeep Willys. 4 wheel drive, 302, 3 speed, lock rear front, tilt wheel, bucket seats, 35 inch tires, lifted, ready for the mud, trails, etc. 9,000 pound winch. all lights work, runs & drives. looking to trade or $2200 cash obo.”

1947_cj2a_southbend

 
To Top

1942 GPW Sacramento, Ca $2000

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE:  This looks like a very good price.

(11/17/09) “1942 flat fender Ford Jeep Willys, F Head, T 90, model 44 rear end, 25 in front, 33’s call Max @ 916-203-7931

http://sacramento.en.craigslist.org/cto/1542544957.html

1942_gpw_sacramento2

 
To Top

Update glitch — final update

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

UPDATE:  Final word

After playing with this issue for days, I kept running into similar problems; no matter what code I used to create the submenu, it wouldn’t work.  For reasons as yet unclear, users that are not logged in can’t access the code to make the menu run.

So, I have a big reminder to people that automatically pops up on all subpages when users are not logged, reminding you/them to log into the site to view the subpages.  I’ve also reinstalled some side menu widgets as well.

Please let me know if you encounter any problems .. d@ewillys.com

– D

==============

I updated to the latest version of wordpress, which caused a couple glitches.  I’ve fixed most of them, but one strange issue is that when you aren’t logged it, you can’t see any sub pages.  Perhaps that’s been an ongoing issue about which i was unaware?

I’ll address this asap, but the front page works just fine.

Thanks,

– Dave

 
To Top

Event: Bring your Willys Truck or Wagon to Moab

• CATEGORIES: Event, News This site contains affiliate links for which I may be compensated.

Here’s an event targeted primarily at Willys Truck and Wagon owners, so if you have a Wagon or Truck, read onward.   Ken and Casey are organizing it, hoping to develop a stronger network of Truck and Wagon owners. I double checked this afternoon that the event is still happening and it’s a go.

WillysOverlandMoabRally

“This is going to be a great time! We are really excited about this 1st annual event. Please RSVP so Casey and I know who is going to make it. Please feel free to call or email us anytime for more details.

Kevin Mereness 208 863-1718 / kmereness@powereng.com
Casey Dimmitt 714-478-1867 / caseydimmitt@yahoo.com

Please provide some basic information when you RSVP:

Full Name:
Phone Number:
Email Address:
Rig Info: Year, Make, Model, and some basic specs

We only ask that each of you donate $10 when you arrive at the event to help us cover some of the cost of the Saturday night BBQ. And if you feel like bringing something to share, please do.  We really want this to be a relaxing time for everyone. This is a family event.

Over the next few months, we will gather up some information on hotels. We will also try to get a group rate if possible.

 
To Top

Classic Men’s Magazines & a Jeep Image

• CATEGORIES: Artists/Drawings, Features, Magazine, Old Images This site contains affiliate links for which I may be compensated.

My jaw dropped as I opened the magazine.  I was in my early teens (mid 70s).  To this day, I’m unsure why my father hid a couple Playboy magazines in with my mother’s stash of old magazines (I’m guessing he never thought she would look there?).  But, sure enough, in my hands was gold, my eyes were big, and it was coooool!  And thus, that was my first introduction to Playboy.

I can’t say I’ve done much research into the history of Playboy, but during a search of vintage magazines in general, I came across a website called Stagmags.com, which appears to be a gathering and recording of many old ‘stag’ magazines that have since gone out of publication.  It’s a reminder that Playboy had plenty of competition from day 1, but to Hef’s credit, managed to successfully carve out a successful niche, while many others failed.

Now, I only bring this up as a segway to one of two images I found on the page and which you can view below.  Hopefully that provides a little more insight into the image.

stagmags_com_image

 
To Top

Builds: Dan’s CJ-5 Down to the Frame

• CATEGORIES: Builds This site contains affiliate links for which I may be compensated.

Dan continues to make steady progress on restoring his grandfather’s CJ-5.  You can see previous reports here.

He reports, “The Jeep is down to the frame and axles. I have a new rear cross member on order. The old one was all bent and rusted. The rear hitch was all bent as well. I found a vintage hitch that is actually straight that I will be using. Once the new rear cross member is on I’ll get all the frame welding completed and then coat it with some Interstate One Step Rust Killer. It is less expensive than POR15 and easier to use but still has impressive results. My goal was to get all the frame work done this winter and I just might get there.”

Here’s a couple pics:

cross-member

back-frame

Here’s the front of the jeep:

Frame-On-Wheels

 
To Top

CJ-3B Project Bennett, CO **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3000.

This seems a bit high for a project. It’s hard to tell what’s all included though.

“Buick V6 Motor. Very Clean Body Ready for completion.”

year_cj3b_bennett

 
To Top

3 Different Hubs Wellington, CO **SOLD**

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Were $10 each.

I’m not familiar with the hubs on the left.

“10 spline early Jeep/Willys hubs. $10 per set”

hubs_wellington

 
To Top

1943 MB Angels Camp, Ca **SOLD**

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

Looks like a good price on a parts jeep.  The body doesn’t look bad (from a distance).

“rolling body and frame”

 

1943_mb_angelscamp3

 
To Top

Wanted: CJ-2A Windshield Frame Knappa, Or

• CATEGORIES: wanted This site contains affiliate links for which I may be compensated.

Here’s a buyer for a CJ-2A windshield frame.  The buyer also has some stuff for sale or trade.

“WANTED: Windshield frame for a 1948 Willys cj 2a flat fender jeep. Just need one that is semi straight for a trail rig. may have some parts in trade. All from 72′ cj 5, 3spd tranny, Dana 20 transfercase, and drive lines. All are sitting in a shop a little greasy but staying dry. Also have 98 blaster parts. both front A-arms with shocks and hubs, fullset of white plastic and seat, fuel tank, stock swing arm with rear axle (bearing froze). Motor that has been rebuilt but ben sitting for a year or so (would suggest to go through it again. Will also sell these items cheap, tired of tripping on stuff. Thanks for reading. Will send pics on request. Serious people only”

http://portland.craigslist.org/nco/pts/1540036976.html

 
To Top

Wanted: CJ-3Bs or CJ-3A/3B parts Elkin, NC

• CATEGORIES: wanted This site contains affiliate links for which I may be compensated.

Here’s a buyer.

“I will buy Willys cj3a or cj3b jeeps in original condition. Also will buy cj3a and cj3b jeep parts. Call 336-957-3512”

http://winstonsalem.craigslist.org/cto/1540809062.html

 
To Top

1958 CJ-3B Lenoir City, TN **SOLD**

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** was $6000

(11/14/09) Lots of updates to this CJ-3B.

“1958 Willys CJ3B High Hood Flat Fender Jeep.  Set up for off-road.  NO RUST! Total frame off restoration in 1995. MerCrusier 4.3L engine, with four barrel Holly Truck Avenger Carb. T-18 granny low 4-speed transmission, model 20 transfer case. Dana 44 axles out of an International Scout, with 4.88 gears and Detroit lockers front and rear. Four wheel disc brakes. Spring over conversion. 38×12.50 Super Swamper tires with little wear. Late model power steering with 1” solid tie rods and Hyme joints, tilt steering column out of late model Jeep. Custom roll cage, racing seats. Large removable storage box in place of rear seat. Filled with spare parts including; fr/rr drive shafts, complete set of spare axles, and other various parts. Also have rear seat which can be reinstalled easily. Custom storage box mounted in rear receiver hitch. Front mounted Warn 8274 winch and on board air compressor. Two tops: Full soft top and bikini half top.  Also CB radio, battery cut-off switch, hydraulic clutch, optima battery, custom nerf bars/rock guards.”

1958_cj3b_lenoircity

 
To Top

1951 CJ-3A Spring Glen, Ut $3500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Check out the unusual gas can carrier.

“For Sale: 1951 Willys CJ 3A, $3,500 OBO, has a rebuilt engine (approx. 4500 miles); hardened valve seats; rebuilt transmission (all new gears); new: leaf springs, non-directional tires (1000 miles) and carburetor ; rebuilt starter; boiled out radiator; converted from 6 volt to 12 volt; all new clutch, windshield, speedometer, gas tank and battery. Also included: oil filter, radiator hoses, gaskets etc. Needs master cylinder and possibly wheel cylinders (both provided new in box), exhaust pipe and muffler could be replaced (rusty), emergency brake could be adjusted.
435-472-0947 Between 9 am and 7 pm.”

http://provo.craigslist.org/cto/2146336509.html

 
To Top

Stainless Grille Shasta Lake, CA $750

• CATEGORIES: stainless/jewels This site contains affiliate links for which I may be compensated.

James has his Stainless Grille for sale.  You can contact him at 530.941.4399 if you are interested.

stainless_grille

 
To Top

Builds: 1947 CJ-2A with Detailed L-Head Rebuild

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

Any of you Pirate 4×4 readers might have seen this thread about a 1947 CJ-2A rebuild (and I should probably spend more time on Pirate as I really haven’t spent any time at all on the site), but this is a nice detailed review of an L-head rebuild, frame restoration, disk brake installation on the original running gear, and  more.  Lots of pics and thoughtful, intelligent discussions.

Click here to see the entire build process

Here’s a few pics:  The beginning, a $2800 jeep from Port Angeles, Wa.  It’s in good condition, but will benefit from a rebuild.

pirate_build_1947_cj2a_1

Here it is partially dissassembled:

pirate_build_1947_cj2a_2

Here the engine is going back together.  BTW, did you know you can ‘borrow’ those pistron compressors through Schucks/Autozone as part of their lend a tool program:

pirate_build_1947_cj2a_3

The engine is more put together:

pirate_build_1947_cj2a_4

Here’s an updated master cylinder:

pirate_build_1947_cj2a_5

This is part of the brake discussion:

pirate_build_1947_cj2a_6

And here the jeep is back together:

pirate_build_1947_cj2a_7

 
To Top

Need a more powerful Snow Blower?

• CATEGORIES: Unusual This site contains affiliate links for which I may be compensated.

Dave forwarded me this Tim-the-tool-man-Taylor version of a Snow Blower.  I’d ask why, but I already know the answer:  because he could.  Below is an excerpt of the article.  You can read it in its entirety and see more pics here.

“December 1, 2005 If you’re tired of anemic, one-lung snowblowers with their slipping drive belts, you might consider Kai Grundt’s V8 snow blower which raises the bar on the traditional snow blower in every respect. With electric start, electric block heater, antifreeze heater and eight cylinders, it has no drive belts to freeze up and you’ll never get bored with the job as the 454 cubic inch big block Chevrolet V8 produces 412 horsepower, 430 foot pounds of torque and can throw snow 50 feet at just 3500 rpm. Nor will you get cold as the machine has been ingeniously designed to route the engine coolant through the handle bars, with the rear mounted, enclosed radiator keeping the operator nice and cozy.

The first point to make is that this is not a V8 grafted on a traditional snow blower carriage but a purpose-built unit crafted around a motor of this magnitude. It functions very much like a traditional blower by way of operator input and feedback and offers effortless safe operation.

Maneuvering the massive beastie (it has a total wet weight of 912lbs) is a snack thanks to the hydraulic-drive 4WD skid steer on independent walking beams which offers a zero turning radius. It’s also as fast as you like, with an infinitely adjustable speed range on the drive wheels via dash mounted flow control. At the opposite end of the scale, it has more than enough torque to pull your car out of the ditch before the hydraulic motors stall! ….”

V8SnowBlower1

 
To Top

Here’s an unusual tractor

• CATEGORIES: Machinery, Unusual • TAGS: This site contains affiliate links for which I may be compensated.
Dave forwarded this to me, who found it here. It’s pretty cool. He’d like to replace the tractor with a CJ-3B.
(Fordson snow-motor)

<a href=”http://www.liveleak.com/player.swf?autostart=false&token=568_1233111054″ mce_href=”http://www.liveleak.com/player.swf?autostart=false&amp;token=568_1233111054″ target=”_blank”>http://www.liveleak.com/player.swf?autostart=false&token=568_1233111054</a>

 
To Top

DJ-3A Body Parts, Pueblo, Co **SOLD**

• CATEGORIES: Body Parts, DJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

Here’s some body parts from a Convertible DJ-3A.  It appears in restorable, uncut shape.  Certainly not perfect though.

“All thats there is tub, hood, fenders, grill and frame. I’m asking $500 OBO. Please give me a call at (719)9480229”

DJ3A_bodyparts_pueblo

 
To Top

1991 YJ + 1954 Wagon Fenders =?

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

The Israeli bureau (Or  Shahar) found this interesting project.  I think this build works better than I might have expected. The builder blended the truck fenders with the front clip of the YJ rather nicely.  There’s still plenty left to be done;  I look forward to seeing the final product.

“Ed started with a 1991 YJ with 4” lift, 15×10 alloys and 31×11.50 Thornbirds. While using the YJ’s hood, grill, tub and inner fenders he gained access to a 1954 Willys pickup and was able to blend the old Willys front and rear fenders to the YJ body giving the Jeep that retro “flattie” look. He said “you won’t believe how well the 2 meld together. I was going to build flat fenders (myself), but after a friend of mine who has a Willys Pickup, Wagon, and a Jeepster said he had some extra fenders (that cinched it).”

See the rest of the pics at http://www.4-the-love-of-jeeps.com/jeep-project.html

1991YJWillysProjectEdward1

1991YJWillysProjectEdward5fender

1991YJWillysProjectEdward6frt

 
To Top

1961 Wagon Rainier, WA **SOLD**

• CATEGORIES: Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4000.

“1961 Willys Jeep Stationwagon in good condition. There is no back seat. Tires are in good condition, 4WD works, winch works, 4spd manual, inside needs some tlc but is functional. It belonged to my husband who is deceased. I am not able to drive it but it has been started regularly . Cash only no trades.”

1961_wagon_rainier

 
To Top

1960 CJ-3B Ogden, Ut **SOLD**

• CATEGORIES: CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2400!!

(12/09/09) This looks in good condition.  I’ll be heading down to Salt Lake (ogden is right on the way) in about 10 days and could look at it if it is still available.

1960 Willys CJ3B – 35K Original miles in Excellent Condition with All Original Running Gear. Frame and body are in exceptional condition, there is very little cancer. Has New Interior & Paint. Needs a top, new tires, and a tune up.From the looks of the vehicle the mileage which shows 40K is original and I think many are miles towed. There is very little rust in the front floors but it has plates bolted in, none in the bed. There is also some in the front fender supports. I don’t thinkit was preped to well butit is a decent paint job. It hasbeen converted to 12 volt. There is no overdrive but the tans and transfercase seem tight and do stay in gear. the seats are he original frames but have been recovered (I believe). It has original warn lockout hubs. The hard top was taken upto eugene and it is an original aluminum hardtop,I maybe able to get pictures.

1960_cj3b_ogden1

1960_cj3b_ogden2

 
To Top

2 ’46 CJ-2As, a ’61 CJ-5 and Parts Keeseville, Ny eBay

• CATEGORIES: CJ-2A, CJ5 This site contains affiliate links for which I may be compensated.

Here’s a bunch of parts and parts jeeps.

“For sale 2 jeeps for the price of one-1st a 1946 Jeep CJ2-A complete ready to restore-great frame body is solid-needs rear floors-all orginal gauges-12 volt system-orginal windshield with perfect glass-hood-fenders-3 front grills-2 extra radiators-2-steering wheels-tailgate-1961 Jeep CJ-5 with all running gears-good frame with a 2-A flat head motor-engine was running 3 years ago when last used-needs tub has a warn spicer rear PTO. 2 complete motors. too many parts to list have an extra front & rear end. Also have for sale rebuilt tranny&transfer case with emergeny brakes and drum ready to go in storage since rebuilt-for a CJ-3A will sell for 600.00. I have been collecting for about 20 years with the intention of putting them on the road,but moving south and do not want to move these. The steering wheels are complete with column.The motor for the 1946 is in excellent running condition,purcased from orginal owner.Have over 5,000.00 in parts alone.  Buyer is responsible for pick up and removal of jeeps and parts. Payment is due in full 7 days after the sale is complete.  I reserve the right to end this sale at any time.  These items are being sold as is with no warranty.     I’am going to revise this item due to the surge of questions regarding the parts what I have for sale is 2-gas tanks $185.00 each-1-extra grill $100.00-2-radiators good condition 200.00 each -rebuilt T-90 transmission new 2nd gear &gaskets 500.00 -T-18 Transfer case rebuilt new brakes,seals,bushings rebuilt in 1995 never used has been in storage $500.00 -2-extra intake manifolds $300.00 each- 2-extra carter carbs $250.00 each. Front & rear ends complete gears-brakes-drums-lift suspension-front tirerods $300.00 each.if you want to make an offer on any part send an e-mail or buy the complete package for 2,000.00.”

View all the pics on eBay

1946_cj2a_keeseville

1946_cj2a_keeseville2

1961_cj5_keeseville

1961_cj5_keeseville_parts

 
To Top

1947 CJ-2A Bend, OR **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500

This has some interesting parts, including a top loader 4 speed, 4.3 liter engine, extended leaf springs, dana 30 front end.

“47 willy’s project no time for 4.3l engine dana 30 front axle with lockright 41 rear axle locked new windshield holbrook long leaf springs dana 20 transfercase and model 18 transfercase and a toploader fourspeed or a t18 transmission”

1947_cj2a_bend

 
To Top

1956 CJ-5 Cripple Creek, Co $2300

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $2300.

(11/07/09) This looks good for the price.

“Great Condition! 719-648-3012 cell”

http://cosprings.craigslist.org/cto/1539194792.html

1956_cj5_cripplecreek