To Top

Here’s some pics from Europe

• CATEGORIES: International, War Images This site contains affiliate links for which I may be compensated.

I never get tired of looking at old jeep pics.  These came from this Italian site:  http://www.vignaclarablog.it/200909167279/a-caccia-vecchi-cimeli-militari-a-roma-nord-dodge-willis/

ww2_blackwhite_france

ww2_blackwhite_france2

ww2_blackwhite_france3

ww2_blackwhite_italy

 
To Top

Kids on a Jeep

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

This pic of kids on a jeep was too precious to resist …

 
To Top

1948 CJ-2A Oklee, MN **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2725.

It’s got a big dent on the driver’s side tail, but otherwise looks good.

Newest daughter just arrived and Jeep has to go. Great vehicle but not a family cruiser. Collector or workhorse, your choice. Comes with 6′ Meyers plow. Runs and operates fine. Homemade soft top. Open to trades for newer Wrangler or CJ otherwise $2725″

1948_cj2a_oklee

 
To Top

1940s CJ-2A? Nuevo, CA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: Still Available. Was $2500.

This might be a good price.  I’m wondering if it is a VEC CJ-2A.

“Jeep Willy’s 4 x 4 registered as a 1946 but has characteristics of 1941-42 military jeep. Needs water pump and starter as it grinds sometimes. Original L head 4 cylinder engine and tranny. Has tool boxes in back and a spare on the back. New battery. Love this jeep but have too many toys! Very fun to drive out in the desert. Reduced price from $3000.”

1940s_cj2a_nuevo

 
To Top

1948 Truck Bandon, Or $2150

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.

This looks like a good price.

“This is a 1948 Willys Jeep Pick Up. 4 cylinder 3 speed 4×4 1948 jeep willys pu. Come out and take her for a spin. call 541-297-5878.”

http://oregoncoast.craigslist.org/cto/1466334901.html

1948_truck_bandon

 
To Top

1953 CJ-3A Harrisburg, Or $1000

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

I’m not sure whether this runs or not.

“1953 Flat Fender Willys Jeep needs work Could be a great project for someone who has the time to give to fixing it up. I am asking $1,000 or best offer. For more information you can contact me at 541-912-7457.”

http://eugene.craigslist.org/pts/1466346129.html

1953_cj3a_harrisburg2

 
To Top

1948 CJ-2A Sister Bay, Wi $1500 includes OD **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD**    Robert purchased this deal. I didn’t notice before, but those are Desert Dog Tires (and I’m likely the only person who cares)!

I would image the Overdrive is probably is reasonable shape, potentially making this a decent deal, especially if the price drops.

“This is one of those projects that you never get around too. The rear spark plug is missing and it appears that the cylinder has collected water over the years so I am sure that the engine needs major work. the transmission shift does not move, no idea. It has an overdrive kit purchased through J. C. Whitney so there are four shifting levers, regular transmission, high low range, four wheel drive, and overdrive. The body has some surface rust and a few holes in the floor boards but basically sound. ”

1948_cj2a_sisterbay

 
To Top

Year M-38 New Madrid, Mo $1250

• CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.

This doesn’t run and looks pretty rough.  The Wagon is for sale for $1250 as well.

“I BELIEVE THIS TO BE A 1952 M38 WILLYS MILITARY JEEP. THE BODY DATA PLATE SAYS SERIAL NUMBER IS MC-59863. THERE IS NO TITLE WITH THIS JEEP. IT HAS THE FOLLOWING ORIGINAL EQUIPMENT: THREE SEAT FRAMES, TRANSFER CASE, TRANSMISSION, MC 80403 ENGINE, BRASS DATA PLATE ON DASH, TWO AXE BRACKETS, WINDSHIELD FRAME, HOOD, TUB, FENDERS, GRILL, TAILGATE, SEVERAL FOOTMAN LOOPS AND OTHERS. IT HAS A CJ5 DIRTY GAS TANK, CIVILIAN 15 INCH WHEELS, AVM LOCKOUT HUBS, SPRINGS HAVE BEEN REPLACED, ALL GAGES HAVE BEEN REPLACED( I DON’T KNOW IF ANY OF THESE WORK) THIS JEEP HAS BEEN CONVERTED TO 12 VOLTS. THE ENGINE HAS A CRACK AROUND THE CENTER HEAD BOLT STUD ON THE DRIVERS SIDE. IT COMES WITH A VOLKSWAGEN CARB. TURNS OVER, BUT I HAVE NOT STARTED IT, I BELIEVE THE CIVILIAN DISTRIBUTOR IS WORN … willysm38@sbcglobal.net”

http://stlouis.craigslist.org/cto/1463931490.html

year_m38_newmadrid

 
To Top

1946 VEC CJ-2A Miller Falls, Ma $4000

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

You can see this sports a column shift.  And, it sports a seized motor.

“i have a 1946 willys jeep (an old army jeep) motor is seized but all origanal no roit surfaced rust only it has a steel top that was custum made for it that was made in west vergina a good old jeep ideal for somone to restore i have more pictures i can send if needed $4000.00 or best offer call robin 1-413-659-2621 leave message speak slowy and clearly thanks”

http://westernmass.craigslist.org/cto/1466329478.html

1946_cj2a_millerfalls

 
To Top

Year CJ-3B LIncoln City, Or $600

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

It will run.  Promise.

“Jeep Willy’s CJ-3B highhood, stock 4 cylinder, will run, no title, 503-440-4145”

http://portland.craigslist.org/nco/cto/1465758451.html

1954_cj3b_oregoncoast

 
To Top

Builds: Cutting a logo into metal

• CATEGORIES: Builds This site contains affiliate links for which I may be compensated.

I am planning to do a section on mini jeeps from the 50s and 60s.  As I was searching for images, I ran across this very logical way of cutting out a logo from a thin plate of steel with some simple tools.  Of course, once I saw the pics, I thought, duh, that makes perfect sense, but for some reason, it didn’t occur to me to do it this way.  Now I know how I can make some “ewillys” plates that I could mount on the sides of the jeep.

I got these pics and idea from the Ranger Station.

You can see the logo in the middle of this image

gf_films_cutout1

The Logo was painted onto the steel

gf_films_cutout2

Then the logo was drilled

gf_films_cutout3

Then there were many hours of grinding according to the builder

gf_films_cutout4

And then, the thing that surprised me the most, was where the builder planned to use the logo.

gf_films_cutout6

 
To Top

1954 CJ-3B Eastern Or $2500 + some other jeeps

• CATEGORIES: Builds This site contains affiliate links for which I may be compensated.

The CJ-3B for sale is a Non Running Jeep that’s a bit rough.  It is for sale on MyJeepSpace.com.  This was put up for sale September 09.  I assume it is still for sale.

Below the images of the jeep for sale is the owner’s collection of old jeeps (+ one of his dad’s jeeps).  The owner lives on a ranch in Eastern Oregon and loves running around it in his old 4x4s. It looks like he had a wonderful barn for storing and working on them!

“For Sale, a nice 1954 CJ-3B High Hood. Not running at this time. Body in good shape, has 4 cylinder motor, original seat frames. Clear Oregon title. I was going to restore it, now going to get married, so, plans change ! Was running for the man I bought it from, he thought he would restore it, started to restore, then found out he was in over his head. Nice jeep to restore. There are pictures of it on my profile ‘view more pictures’. $2,500. colt5124440@yahoo.com , 541-358-2800”

You can view the owner’s profile here and   You can view all his jeeps here.

1954_cj3b_easternoregon5

1954_cj3b_easternoregon2

1954_cj3b_easternoregon1

1954_cj3b_easternoregon3

1954_cj3b_easternoregon4


Now some pics of the collection:

This is his row of project jeeps.

row_of_projects_easternoregon

Here’s his two CJ-5s

cj5s_easternoregon

Here’s a 1947 CJ-2A he restored

1947_cj2a_easternoregon

And a 1946 CJ-2A that he and his dad restored

1946_cj2a_easternoregon

 
To Top

1964 CJ-3B Saratoga Springs, NY **SOLD**

• CATEGORIES: CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was on eBay.

Gerald pointed out that this appears to be a Right Hand Drive CJ-3b.  I agree it looks that way.  On closer inspection, as Felix noted, the Willys was backwards.  Some of these pics are flipped and some aren’t, though who knows why ..

This jeep has been sitting for 20 years, but it looks more like it has been sinking for 20 years.

1964 Willy’s Jeep. Has not been operated since 1990. In fair shape. A Great Restoration Project or for Parts. I can email any interested party additional pictures. Comes with the snow plow attached. We cannot provide the title (it has been lost), but do have a New York State Registration document for this vehicle. Additionally, we cannot provide a key to the ignition. This car is sold as is. It must be picked up or buyer must arrange pickup. Feel free to email me with any questions.”

1964_cj3b_saratogasprings

 
To Top

Builds: More on Paul’s Stainless M-38

• CATEGORIES: Builds, Features • TAGS: This site contains affiliate links for which I may be compensated.

If you haven’t yet read about Pauls M-38 project, go to installment 1 and installment 2.

Paul, take it away …

Paul Bierman again with a few more pictures of the never ending Willys project.  I didn’t want a rear seat (Who can fit back there anyway?) so I fabricated a storage box which spans between the rear wheel wells and is divided into two sections.  The half behind the passengers seat is the new battery location along with the circuit breaker panel, the master relay and circuit breaker and most of the switch relays.  The half behind the driver’s side is the home of a now vintage (but it’s still brand new, I bought it quite a while ago) ten disc cd changer with some room left over for an out of view storage compartment.  I’ve replaced just about all of the wiring with new (there’s some original wiring on the gas heater still but I’ll get to that sometime) with some fancy pants, super flexible cold weather wiring which stays flexible down to 55 below zero F.  Boy, doesn’t that just make you feel dandy.  If it’s that cold I’ll wait till spring, besides I try to draw the line on outside work when the temperature drops past 40 below zero F, nothing’s worse than having to take a leak when you’re wearing multiple layers of clothing eight inches thick and Little Mr. Wizzard shrunk up to an inch and a half.  No matter what you do you know at least one of your boots is going to get wet.

Moving the instrument panel above the windshield caused still more problems but the most annoying one was how I could get all the wires from the gauges down to the main body without my work looking like crap.  I was at work thinking this over (Ok, I was in the bathroom but I do my deepest thinking sitting down) when I happened to glance over at the wall and saw a beautiful stainless steel handle just the right size with curved ends, satin finished and everything!   Problem solved, until I mentioned this great solution to my boss and his exact response was, “Touch it and die.”  Geeze, guess I’ll have to spend my own money and purchase some handicap grab handles.  The local home supply store had quite a selection of stainless handles but I ran into a problem with an over enthusiastic clerk wanting to help me with my bathroom remodel.  He’d never heard of a 52 Willys bathroom renovation.  The handles worked out great, you can see them on the pictures of the windshield/instrument panel photos by the door posts.

Winter was late getting here (I love global warming!) but I have lots of cold dark days ahead of me so the Willys will get a great deal of attention before this latest batch of snow melts.  Next week I’ll have the side and rear window glass cut and then I’ll have to make patterns for the door window glass and they’ll be ordered when my wallet says it’s ok.

PS …  I’ve really enjoyed the comments left by fellow Willys wackos, the concern about welding above the jerry can was nice but the can had never been used and I threw it out after I’d made the gas can mount.  If I was to worry about welding safety I should have thought about the beef and bean burrito (with cheese and onions on top) I’d eaten for lunch, not so much for the flamability aspect (the poor garage just isn’t that tightly sealed) but the thrust developed after lunch could have blown me off those fancy bucket workstands!

Nov 09 008

Nov 09 010

Nov 09 012_3

Nov 09 024


 
To Top

Club Runs: Over the Mts and Thru the Woods for Fish & Chips

• CATEGORIES: Club Runs This site contains affiliate links for which I may be compensated.

I’m introducing a new section I call club runs.  We’ll see if it grows or not ….

The members of the Wandering Willys Jeep Club live in the greater Seattle area, which means if they want Fish and Chips, going to Seattle’s Alki Beach on Puget Sound and feasting on Spuds’ Halibut Fish and Chips (fresh fries) would make a great deal of sense.  Spuds has great fish and chips.  But, no one has accused the WWJC members of having much sense.

Instead they elected to jump in their jeeps and head towards the woods, mountains and snow of the Naches Pass to find Fish and Chips.  It was probably their crazy President’s idea, yes Mitch?  I’m not sure where they ate their fish and chips once they reached the other side, but as the pictures show, it must have been a beautiful, winterland run.

On the website, the club notes, “Nine Jeeps took to the Naches Trail for some Fish & Chips on the east side of the Naches Pass.  The snow was fun, but massaged into ice by the Jeeps.  Some of us went home on asphalt after a late lunch, others took the trails well into the night for some fun night Jeeping.”

I don’t know about you, but I’m getting hungry …..

You can see more pics at the WWJC website.

nov_2009_naches2

nov_2009_naches3

nov_2009_naches5

nov_2009_naches4

nov_2009_naches1

nov_2009_naches6

 
To Top

Willys Chassis Montosano, Wa $300

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

This looks like a straight frame with plenty of parts.

“40 s something willys frame , motor , axles , trans/transfer case. All assembled. Motor block cracked. Running gear looks to be good. Sold as is. $300.00 cash”

http://seattle.craigslist.org/sno/cto/1464969811.html

willys_chassis_montesano

 
To Top

1948 Wagon Alameda, CA **SOLD**

• CATEGORIES: Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

This looks like an interesting project.

“Bought for a family project that unfortunetly has never gotten underway…. This is the real deal, ITS ALL THERE!!! Never been taken apart, never, “restored,” and in great shape. Its been warehoused for the last ten years, and has not been on the road since the 80’s. In great shape for its age, Black plates, clear title, 100% unmolested – Dash is untouched, roof is solid. A great candidate for restoration. I will be out of the area until 11/1/09, but will upload pics then. For those who are interested, please email and I will reply upon my return. Available to show Wednesdays, Thursdays, and Fridays. 2500 obo”

1948_wagon_alameda

 
To Top

1951 M-38 Slidell, La eBay

• CATEGORIES: M-38 • TAGS: This site contains affiliate links for which I may be compensated.

It’s too bad this doesn’t run.  I like how rough it looks.

“1951 WILLYS JEEP M38 4X4, 24V  SYSTEM, MFD. BY WILLYS OVERLAND MOTORS INC., MFR. SERIAL NUMBER 38477, VIN # 451-MC1-38477, DATE 10-51, WILLY JEEP HAS BEEN IN MY GARAGE SINCE 1972, LAST REGISTERED LIS PLATE 1972-1973, LOST  TITLE, NEEDS NEW 2-RIMS  AND TIRES, FLOOR BOARD NEEDS REPAIR AND SOME BODY REPAIR, JEEP DOES NOT RUN BUT ENGINE WILL TURN OVER WHEN PULLED.”

View all the pics on eBay

1951_m38_slidell

1951_m38_slidell2

 
To Top

1956 CJ-5 Bonduel, Wi $2000

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

This has a cool old top.  Give this a paint job and it could be a great old jeep.

“For sale 1956 Willys jeep. This jeep has recently had the motor and plow pump rebuilt it runs great. The frame and drive train are in good shape. The body has some rust but for it”s age it”s in pretty good shape. It would make a great cabin or woods truck. $2000 o.b.o call 920-373-0833”

http://greenbay.craigslist.org/cto/1464012653.html

1956_cj5_bonduel

 
To Top

This looks like an early 50s M-38 eBay

• CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.

The seller lists this as a 1945 jeep, but it looks more like a M-38 based on the windshield and the grille (both headlight bezels and holes below the bezels.  This is located in Oxford Station, Ontario, Canada.

“Willys Jeep I think is it a 1945 it runs good 4×4 work great! comes with a plow and a parts jeep.  If you have any questions feel free to email me”

View all the pics on eBay

year_m38_canada

 
To Top

1953 CJ-3A Waukesha, Wi **Status Unknown**

• CATEGORIES: CJ-3A, M-38 • TAGS: This site contains affiliate links for which I may be compensated.

This is a CJ-3A that’s been nicely altered into a M-38 clone.

“1953 M38 CLONE, Rust free, 225 V6, Over drive,”

1953_m38clone_cj3a_waukesha

 
To Top

M-38 Grille Seattle, Wa $75

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

Steve’s got this good looking grille for sale, though I believe it’s a M-38 grille. Note the holes at the bottom.  I believe they are for attaching the M-38 grille hinges.

“All Orignal early Flat fender Grille with Shroud ( I think CJ2A), Uncut or molested, Light surface rust but in great shape, been in storage 30+ yrs, call with questions, 206 890 6233.”

http://seattle.craigslist.org/see/pts/1462257584.html

cj2a_grille_steve

 
To Top

Willys Reason Number 13

• CATEGORIES: Reader Stories This site contains affiliate links for which I may be compensated.

I don’t know the full story here, but I suspect Jim didn’t have a good morning.

Jim writes, “Reason number 13 why you do not let your lazy good for nothing 250 pound coffee drinking buddy lean against your willys on jack stands in the gravel at 8am in the morning!”

007

 
To Top

Jewels Stainless Steel Tailgate Seattle, Wa $300

• CATEGORIES: stainless/jewels This site contains affiliate links for which I may be compensated.

This is for sale by Steve, as close to a brother as I had growing up, who grew up in the back of his jeep (Otis) while I grew up in the back of mine.

“I have a Best Jewels SS tailgate super rare.  It has a small dent on top tube but could be easily repaired.  206 890 6233 call with questions.”

http://seattle.craigslist.org/see/pts/1464094723.html

stainless_steel_tailgale_steve

 
To Top

1951 CJ-3A Kingsburg, Ca $17,500

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

It’s certainly a clean,  nice looking rebuild.

“A unique custom with a 4.3 Chev FI and 4L60E. Drivetrain professionally built by Tri County Gear Pomona with Dana 300, 4.88 gears, full floaters, 44 rear, power front discs and ARB lockers, It has Tom Woods drivelines and a beautiful BMW Titan Silver finish. If you are looking for the nicest Flatfender around that is good on the street, beach or trail check this one out. 600 miles on complete restoration. It only needs the key turned-gas is in it! Call Doug at 559 287-4668 or Email at mailto:dlevers@sbcglobal.net”

http://orangecounty.kijiji.com/c-Cars-vehicles-Trucks-vans-SUVs-CJ3A-Willys-Jeep-W0QQAdIdZ168376884#ixzz0Wi8jssJf

1951_cj3a_kingsburg4

1951_cj3a_kingsburg1

1951_cj3a_kingsburg8

1951_cj3a_kingsburg2

1951_cj3a_kingsburg9

1951_cj3a_kingsburg61951_cj3a_kingsburg3

1951_cj3a_kingsburg7