This afternoon I spent some time searching the internet to find some type of vintage mud flaps, without much success. I’m looking for some flexible rubber flaps with some type of 4×4 image or logo on them. Here’s an example of what I had on my last jeep (I should have kept those …).
1950 Jeepster Eastpointe, Mi $750
Here’s a barn find. If the rust situation isn’t bad (and that’s a big if), then this might be a good project. Slim on details.
“call for details after 10 am 586-773-7195 Chuck”
1958 CJ-3B Soda Springs, Id eBay
UPDATE: This has been relisted on eBay
It looks like it is sporting some newer springs with some lift, but otherwise is pretty stock. Appears in very good shape as does the trailer.
“This Jeep is in excellent condition! I was going to use this for mountain fun, but decided it was in to good of shape because it is vintage. It runs great and I have had no problems with it. Does leak a little oil. Very quiet and clean! There is a scratch in the paint on the hood. I tried to show this as best I could in the pictures. I bought it from a retired gentleman that had restored it and kept it in garage and so have I. Comes with bikini top, full soft top, hard side doors with matching paint, tow bar, two jeep manuals, an extra gasoline rack, harness seat belts. Tires are in excellent condition and the spare is new. ”
My Build — Small wins
Small wins continue to push Gus forward. This weekend I finished hooking up the transmission lines to the transmission cooler. It’s a good think I pulled the lines apart and double checked them as one had a crack near the entry to the th350. A quick stop at Andy’s Supply in Boise and the crack was taken out and the line repaired (Boy, do they give great service!).
My radiator hoses were a challenge. I stopped in at my local Schucks and wandered back to their radiator hose area. After seeing that none of their hoses would work, I finally selected two that I could cut, bridge and fit. After cutting the hoses and bridging both radiator hoses (inlet and outlet) with a metal tube, I finally got a fit I can live with — however, it’s not a solution I’m thrilled about.
This is one of those situations I’m gonna let digest for a few days while I tackle some work projects and deal with replacing the waterpump on my 540i (which over the last month has seen the thermostat go bad [$100], the alternating belt break [$25], and the waterpump go [$150] — each requiring an online purchase and a week wait).
Reader’s Builds — Don Giovanini’s CJ-3B
Don’s got a beautiful CJ-3B that he’s clearly spent a great deal of time building. Only a labor of love would produce details as unique as ‘a 4 barrel with a holley from a scout’. If you don’t see this weekly driver around town, then he’s likely in the the hills of Colorado.
Some stats:
- A 1954 CJ-3B that has the nomenclature plate for government service.
- 231 buick bored .030 balanced
- Eldebrock performer 4 barrel with a holley from a scout with a small venturi
- Continue reading
1946 CJ-2A Albuquerque, NM $9500
Here’s a restored CJ-2A out of New Mexico.
“1946 Willys CJ2A, classic Jeep restored to original condition w/careful attention to detail, frame off restoration, every component of drive train rebuilt including the GO DEVIL flat head, L-134 engine, transfer case and transmission, new Spicer fron axle shafts, new brake lines, wheel cylinders and master cylinder, ignition converted to 12 volt solid state, Jeep comes w/open-sided, canvas, trail top and adjustable tow bar, $9500 or best offer.”
1960 DJ-3A Boulder City, NV **SOLD**
I haven’t run across very many DJ-3As in running condition. It looks like it would be very restorable. See the text from the old Aug 1, 2008, craigslist ad below —
“1960 DJ3A Willys Jeep, two wheel drive, three on the tree, brand new best top, new clutch, new brake master cylinder, new ties, new coil, 134 inch flat heatergen, 95135 miles.”
1943 GPW Riddle, Or — $3500
UPDATE: The price has been reduced to $3500
Obviously, there’s been a few updates, and it sounds like good ones, to this jeep. Most interesting to me is the chain driven clutch. I’m not sure what the seller means by that.
“1943 flatfender jeep produced by ford for the war.. Not all original so if thats what your looking for this isnt it. But if you want a good driving fun flatfender this is the rig. Its got a buick 225 v6 that was rebuilt 4,xxx miles ago, saginaw power steering, swapped in dana 30 front end with disk brakes and warn hubs, rancho springs and shocks, t-14 3 speed full synchro tansmission with a warn overdrive, full k line soft top in decent shape, chain driven clutch makes it easier to engage, Good body with minimal rust, larger gastank, electic fuel pump with shut off switch, spare tire carrier, ….. Contact me at cpap22@hotmail.com or call Chase at 541-817-2101”
1954 CJ-3B Sanger, CA **SOLD**
It’s listed at $3500, but James noted the seller will take $3000. I can’t see any major issues from the pics.
“1954 willy’s jeep CJ3B; mostly original condition. F head engine, runs good. Price is $3500 OBO”
1940s MB Sunnyvale, Ca $3500
The top on this MB is unusual. Is that a custom or aftermarket top? I can’t say for sure this is an MB, it’s just my guess.
“I have a 1940’s Willy’s flat fender for sale. I’m asking 3500 or best offer. The jeep still runs but needs work as you can see in the pics. If you have any questions about the car or your interested in looking at it. You can reach me at 408-209-0511 my name is Branden. Or you can send an e-mail to shortys_weedies@yahoo.com Serious inquiries only. Thank you”
1951 CJ-3A Newcastle, CA **SOLD**
“1951 Willys Flat Fender Jeep $2200 obo. Has 302 Ford V8 running with 4 barrel carb. Needs tranny and transfer case replaced. Have original trans and transfer out of vehicle (bad case and cluster). “
Flat Fender Repro Body Nevada $1500 – $2000
This is a brand new reproduction body that includes front clip and windshield frame. Never installed. If you already have a title, then this is a pretty sweet deal for only $1500.
“New, never installed, Jeep Flat Fender body. Includes tub, front fenders, grill/radiator support, radiator, hood, windshield frame. This was a project that never got started, built a CJ7 instead. It cost over $3000.00 new, I will take $2000.00 with title and VIN plate or $1500.00 without title and VIN plate. Prices are firm. Reply to this ad for more details, questions or to make an offer.”
Buick V6 Jeep Headers $100 — SOLD
UPDATE: Don has said he’ll purchase the headers. Apparently his son is building a ’52 flattie with a V6. Ironically, Don is in Colorado and Colorado is where I purchased my newest set off of craigslist.
Wait, this is my ad … I’m selling this set of headers because I found a set of chrome V6 headers in Colorado that John will be sending me tomorrow that ‘should’ fit.
“I’ve got a brand new set of jeep fenderwell headers for sale that I bought several months ago. These fit Buick V6s (225, 231, 3.8L). I bought these brand new for my jeep, but the way my engine is configured, they were angled in such a way that they don’t quite fit.
These should fit fine on a normal jeep application. They’d fit fine on my jeep if I had a shorter tranny, but the longer tranny pushed the engine farther forward and higher. You can see how my old headers fit but the new ones didn’t here at my ewillys website: http://www.ewillys.com/?p=765. ”
1952 M-38 Greeley, CO **SOLD**
Except for the ‘racing’ scoop’, engine and tires, it looks pretty stock.
“A RARE 1952 M38 FLAT FENDER WILLYS JEEP.ENGINE HAS BEEN UPGRADED TO A 1956 F-HEAD 134 CU INCH 75 HP FRESHLY REBUILT. T-90 MANUEL 3 SPEED TRANSMISSION, T-18 TRANSFER CASE. HAS LOCK OUT HUBS. ALL MECHANICAL COMPONENTS IN EXCELLENT WORKING CONDITION. ELECTRICAL SYSTEM HAS BEEN UPGRADED TO 12 VOLTS. INCLUDES ALTERNATOR, ELECTRIC WIPERS, LIGHTS WITH TURN TURN SIGNALS. ALL GAUGES IN WORKING ORDER.”
My Build — Combination Valve and Oil Filters
I’ve been a little side tracked from Gus due to a recent neighbor’s problem with a mail box — her son hit another neighbor’s mail box with her car, damaging the mail box (it’s actually two mailboxes and paper boxes that sit on a single pole). By now, the whole neighbor knows me as the ‘guy with a jeep’; so, it was only a matter of time before it was my welder to the rescue (ok, it was a bit more complicated than that).
Now, back on track, I’ve made some progress on some trivial details.
Oil Filtering System: When I bought my V6, the seller included an external dual oil filter system. I decided to install the system because (1) I would increase the available oil in the system, (2) having the filters external of the engine would reduce engine oil temperatures, and (3) having two oil filters would help with the engine oil temperatures even more. Since I’m of the opinion that my last engine blew up due to oiling problems (though that was a much older 225 engine), I’m hoping this helps stalls potential problems. I’ve also been on the phone with TAPerformance and they suggested the use of a specific pressure spring for use in buick engines with high pressure attachments.
In the image, you can see how the oil filters will sit above the filter base and the hoses will wind down to the oil filter and the forward, passenger side of the engine.
Combination Valve: A Combination Valve is simply a proportioning valve and a pressure differential valve that is combined into one unit. I got one from a junk yard early 90s cherokee. I grabbed the valve, the valve bracket and some of the lines. The lines between the valve and the master cylinder were long enough that I can attach the valve to the frame. So, I welded a small bracket to the frame and now the valve bolts to the frame.
In the image, the valve looks very close to the front of the tranny, but fortunately, there’s plenty of room.
1947 CJ-2A New Jersey eBay
This looks like a very solid, clean CJ-2A. I think the opening bid price on this is pretty reasonable.
“You are bidding on an original rarely seen 1947 Willys Jeep CJ-2A that has been mechanically restored to use as an excellent daily driver, cruise nights, a shore summer house Jeep conv. or off-road 4×4. It is an original Willys Jeep CJ-2A 4×4 it now has a back seat, with full bucket seat interior, electric wipers, 3 speed manual transmission many great upgrades and so much more.”
1961 FC-170 New Jersey **SOLD**
This appears in great shape.
“Price Reduced 1961 Jeep FC 170, Clear N.J title, 39,000 Original Miles, Originally Owned by a Fire Department, L6 226, 3 Speed Trans, Recent Replacement Parts Include: Interior Upgrade, 5 Tires, New Master Cylinder, Brakes, Wheel Cylinders, Hub Seals, Rebuilt Carb, Heavy Duty Starter, Steering Box Seal, Coolant Hoses and Thermostat. Auxiliary Lights on Rear Fenders. Repainted in 2003 with Minor Body Repair.”
1948 CJ-2A Branford, Ct $2000
“Willys jeep mostly CJ2A, F-head 4 cyl, 3 speed trans, new brakes, new wiring, 12 volt. Runs good, drives good on road and off. $2000”
1946 CJ-2A Rice Lake, Wi eBay
Brian found this unique ’46 on eBay. No doubt there’s a certain personal touch to this CJ-2A.
“For sale I have a 1946 Willys CJ2A Jeep. It runs good, all 4 WD works properly. It needs rear brake drum installed, I have the drum. It has all new brake shoes and wheel cylinders, duel rear wheels needs wiring work for lights to all work. The jeep was my dads he had it since 1962 it was always kept in the garage. The body is in pretty good shape for a 46. It was painted in 1995 and it had floor patches welded in 5 years ago. The snow plow, hydrolic up and down manual left and right. I just put in a new interstate battery. It was converted to a 12v system. Thanks for looking, ask any and all questions. The jeep is for sale locally, I can stop the auction at any time!!!!!”
Rusty FC-170 Garden City, Mo $500 obo
“Last time on this one. Antique jeep fc 170 very nearly complete. Taking the torch to it very soon.$500. o.b.o.”
1961 FC-170 Modesto, Ca **SOLD**
UPDATE: This sold. Thanks Alan!
The ad says this is a must look, however it still looks rusty at the edges to me.
“1961 FC 170 Jeep MUST LOOK 1961 FC 170 JEEP. GREAT JEEP! CURRENT NON OP 6 WHEEL DRIVE. 4 SPEED TRANS. 283 SMALL BLOCK ENGINE. 70-LIMITED SLIP. SPICIER REAR END. FLAT BED. $2,500 AS IS OBO.”
No Year FC-170 Wenatchee, Wa $1000
This is one of the cheaper FC’s I’ve seen — It’s a project.
“No title, needs lots of work. No transmission or transfercase. Engine does not run. These are rare. Will trade for guns, gas station items or other interesting items.”
1944 GPW Granite Falls, Wa $2500
This appears to be a very restorable GPW. If you are serious about getting a GPW, this one is worth a look.
“This is an original Ford GPW WWII jeep from 1944. It is a pretty rough project but does have a lot going for it.
original Ford engine not running but not seized. Engine and frame numbers match!! (as they should on ford jeeps). Original gearbox and transfer case. 3 combat rims. Call for more details if interested. Jason (360)691-7740”
1958 Flatfender Rockclimber Spanaway, Wa $6000
Looks like there’s been some time and money put into this rock climbing flatfender.
“58 willys flatfender it has a chevy 350,sm420 tranny, dana 44 axles with 538 gearing and detroit lockers,38″ bogger tires,4wheel disc brakes,8000lb warn winch,propane injection fuel system, custom roll cage,raceing bucket seats…comes with double axle car trailer…6,000 obo call ted @ 253-832-0728 ”
1946 CJ-2A Bay Area, Ca $3500
An olds V6? It’s so uncommon, that I had to look up the engine to learn more about it. According to Wikipedia, a version of the Buick 231 or 3800L was used between 1975-1980 in the Starfire GT. The only difference I can see is that the alternator is on the driver’s side rather than the passenger side. I’m not sure where the powersteering pump is located.
“Nice running flat fender Willys CJ2A. Olds V6 w/recent valve job. Headers. Stock transfer and trans. P/S, manual brakes. New battery and alternator. 12 volt conversion. Rebuilt carb, master cyl. All new brakes. Tires are fair, with matching new spare (not shown). High lift jack. Roll cage. Soft top with doors. (not shown). Gas tank relocated under rear deck. Stock tank removed but included. Tow bar. Oversized radiator. Warn winch included but not mounted. (Had been mounted so all holes are there). Old AM/FM/Cassette, No Speakers mounted. Old CB. 408-988-0668 M-F. 8:00-4:30”