UPDATE: **SOLD** Was $8500.
Has lots of mods.
“Dana 60 front 350 tbi sm720 trans dana300 tcase 39″ irock tires on board air custom cage arb locker in front and spool in the rear”
UPDATE: **SOLD** Was $8500.
Has lots of mods.
“Dana 60 front 350 tbi sm720 trans dana300 tcase 39″ irock tires on board air custom cage arb locker in front and spool in the rear”
Nice looking rig. Not much ’45 left on this.
https://modesto.craigslist.org/cto/d/san-andreas-willys-roadster-1945-willys/7153234748.html
“1945 Willy’s Roadster- 327 cubic inch V-8, 4-barrel carb, Electronic MSD ignition, Headers, Large wheels and tires, Roll Cage, Racing seats- Newly upholstered with 4-point harnesses, GM Tilt steering wheel, Previously taken down to the frame and repainted- frame black, Body- bright Red.”
UPDATE: **SOLD** Was $2500. It was a former racing jeep owned by Bob and Arlene Brooks, longtime members of the Green River Valley Jeep Club and heavily involved for decades in the PNW4WDA.
Has some mods.
https://www.facebook.com/marketplace/item/3166294533426157/
“I have a 1947 willys for sale. It was my fathers jeep I don’t have the time to to work on it and get it running again. It breaks my heart to sell it, but i don’t have the room or time for it right now. My loss your gain.”
Has a variety of updates.
https://portland.craigslist.org/clc/cto/d/canby-1952-cj3a/7147823279.html
“1952 CJ3A long term project
Need to thin the herd
Rust free
Tuned port fuel injection 350 Chevy
W/300 TC ’44 Front end
W/ Warn Floater kit &
Disc Brakes
Full Cage
$6500.00”
Lots of mods to this rig.
https://www.facebook.com/marketplace/item/703634577093461/
“This is a 1948 all steel tub sitting on a custom fabricated boxed Chromoly frame and roll cage. I can’t recall the stretch amounts. Beautifully powder-coated. NOT auto enamel. Has solid body mounts (Stock thickness).Custom front shock hoops. Custom fabricated aluminum fuel cell under the seats. (External fuel pump) There is some rust and Bondo. NOT a “Show Vehicle”.I use this rig. Just not lately…
Dana 44 upfront with a Detroit locker and 35 spline custom axels/custom Hi Steer set-up(Power).GM 12 bolt in the rear with a competition ARB air locker. (No compressor or solenoid required) Also 35 spline. Custom fabricated 4 link quadraliptical rear suspension riding on 41 inch Super Swampers.Stock GM leaf springs on top of the front axle/no lift. (Amazing flex and road manners). GM crate 350/TH-350/NP203 drivetrain. Power disc brakes front and rear. Warn 12,000lb winch. Optima red top battery. Please feel free to reach out for more details IF YOU ARE A SERIOUS BUYER. (Let’s not waste anyone’s time)”
Looks like a fine cage at a reasonable price. This might not fit a low hood depending on how tightly the front loop follows the high hood cowl and windshield.
https://spokane.craigslist.org/pts/d/spokane-willys-jeep-roll-cage/7118002356.html
“Roll cage with mounting hardware removed from a 1954 CJ3B. I would assume it would fit any flat fender cj 3a, 2a ford or whatever.”
UPDATE: **SOLD** Was $400.
Looks like a good cage.
“Full roll cage out of 1946 Jeep CJ2A. No dents, no cracks just not going to use.”
UPDATE: Still Available.
(01/27/2020) I think I’ve listed this before, but can’t find it.
https://www.facebook.com/marketplace/item/848747005595447/
“1942 Jeep Willies. -turbo 350 trans 350 crate motor 330 horse 9 inch high pinion Dana 300 2.0fox shocks coil over New altimeter gauges new paint and powder coated roll bar new tires much more”
This may be built on an M-38A1 frame. Has an unusual roll cage design. Seems a good value.
https://www.facebook.com/marketplace/item/549671825845221/
“1989 350 vortek from camaro re-cammed, th350 w/ manual valve body and 900 rpm stahl, warn all range OD, dana 44 rear w ARB, dana 30 front w/ ARB, supertrapp exhaust, 4 wheel disc, 4 35″ boggers, 2 35″ buckshot, bellevue winch, on board air system… too much to list”
UPDATE: Price dropped to $9000.
(02/13/2020) Lots of mods.
https://oklahomacity.craigslist.org/cto/d/oklahoma-city-1946-willys-jeep/7072316483.html
“Runs & drives great! Recently got a rebuilt small block engine (manual), ODO has 5 miles. Two-seater with new upholstery on seats. Has roll cage top, originally was outfitting it to be a rock crawler… but life happens… Tire are 35″ tall, 12.5″ wide and the rims are 17″. Front window still folds down like manufacturer intended.”
A ‘ran when parked’ classic build with some old school art on the back. Looks like this was a neat rig back in its day.
https://sacramento.craigslist.org/cto/d/rancho-cordova-1951-willys-cj2a/7066131971.html
“Awesome rebuild project for somebody.
Registered as a 1951 but vin comes up as built in 1947
Body is strait. Does have some bondo work.
v8 with custom headers. It did run when it was parked 15 years ago”
Interesting paint scheme and roll cage design.
https://www.facebook.com/marketplace/item/2635922679856281/
“1965 Willys jeep cj6 $2000 OBO Original 4 cylinder engine 3 speed transmission 4×4 .”
UPDATE: **SOLD** Was $2200.
Some work left on this project.
“I got a 1948 willys Jeep crawler just took it out this weekend runs good crawls just about anything it’s 3.8 liter GM v6 Buick motor to Douglas d6 refurbished head reach Rivers intake manifold has a turbo 350 transmission with a heart speed shifter has a GT steering wheel it has rack and pinion steering has 35 inch tires on 15-inch wheelsneeds little to finish putt switches in I have them comes with extra motor and bunch of parts bill of sale and I started the DMV paperwork to get it registered for green sticker”
UPDATE: Price dropped to $9500.
(01/02/2018) Check out the unique dash. There are a few interesting mods on this jeep.
https://sandiego.craigslist.org/nsd/cto/d/vista-1947-willys-jeep-cj2a/7032834851.html
“Mostly restored, not original restore. Fresh Ford 289, Rebuilt transfer case, has overdrive can be driven on freeway, manual 3 speed ford transmission, 4 wheel disk brakes, new Warn hubs, full cage roll bar attached to frame. All new electrical, Warn 8000 winch, custom dash and center console. Aluminum Bimini cover, to much to list.”
UPDATE: Price dropped to $4500.
(10/25/2019) The roll cage has not been finished. I will need additional work. This has a rear full floating kit.
https://www.facebook.com/marketplace/item/763538520745375/
“1949 Jeep Willys Chevrolet V8 283 4 speed early Corvette transmission with Hurst shifter Warren overdrive positraction front and rear 538 gears power steering new Holly carburetor, new seats, spare rear axles, roll cage (tack welded in, can be removed or finished) title in hand”
UPDATE: **SOLD** Was $10,000.
Has some chromed features.
“Beautiful cj2a jeep Clean title Runs great Will climb anything Can be used as a daily but is primarily set up for offroad Need the space, need it gone 10k FIRM”
Interesting roll bar supports that are welded onto the front shackles of the rear springs (see pic #2). They don’t seem to connect the roll cage. Maybe they help support the body? Note that the front shackles have been reversed.
Body has some rust and at least one floor patch. I haven’t seen the front loop of a roll cage attach to a dash with just one bolt on each side like this one.
https://frederick.craigslist.org/cto/d/frederick-1962-jeep-cj5-fire-jeep/7007857866.html
“1962 Willys Jeep CJ5 Dept. of Agriculture Forest Service Brush Truck 6. I do not have documented proof that this was an original fire Jeep but if it wasn’t someone went thru a lot of trouble to make it one. Starts, runs, stops and drives well. Prior to my ownership it appears to have been re-wired and a new generator was installed.
That’s a heavy looking bumper.
https://dallas.craigslist.org/ndf/cto/d/north-richland-hills-1947-jeep-willys/6999825200.html
“I think it has the original 4 cyl engine. Sounds like a tractor. Runs and drives has all new brake system, heavy duty bumpers and custom roll bar. Body in better shape than most 47’s. Tons of potential. These are getting hard to find”
UPDATE: Still Available.
(08/24/2019) Lots of custom work here.
https://www.facebook.com/marketplace/item/364012307826282/
“1948 Jeep Willy’s rock crawler. Buick V6. Auto. 35″ mtrs on aluminum beadlock wheels. Lockers. Warn 8000 winch. Tons of custom stuff done to this rig”
Hard to beat this price if you need a later model CJ-5 roll cage.
https://www.facebook.com/marketplace/item/1306008189565137/
“Full roll bar cj5 jeep 1977”
Looks like a solid build. If it is a 1942, there’s probably not much 1942 left on it.
https://www.facebook.com/marketplace/item/2807904169227487/
“Great condition unknown miles changed out speedo”
UPDATE: **SOLD** Was $12,500.
“For sale or trade is my CJ3B Willys flat fender Jeep that is stretched to CJ6 length. Below is a lot of info, so please take the time to read it . I call it a CJ6B (CJ3B body at CJ6 length).”
Specs:
• Body, title, VIN, VIN plate, and original black California plates are from a 1960 Willys CJ3B. Clear title and current registration, both in my name. Tub is stretched behind the door openings; seats 4 adults. It sits on an early CJ6 frame. The wheel base is about 104″. Plenty of leg room & head room all around.
• Engine: Buick V6 225 odd-fire, about 8,000 miles on it since rebuild by previous owner; new battery, aluminum 2 core radiator, electric fan, heavy flywheel, known for allowing low rpms and good crawling,
Has lots of updates. It’s being sold by a dealership.
https://www.facebook.com/marketplace/item/481945069203438/
“The ultimate off road Jeep with style and character. Features a crate 4.3L V6 Chevrolet engine, Turbo 350 automatic transmission with Art Carr shifter. The exterior is Green with full roll bars, Dana 60 axles, 5:38 gears, ARB lockers, Warn hubs, on board CO-2, Warn winch, full hydro steering, King front coil overs, Bilstein rear shocks, Crane differential covers, full tube frame and atlas twin stick CTM U-Joints. The interior includes Black race seats with over the shoulder harness’, aftermarket CD, full Auto Meter gauges and ready to crawl!”
It’s a project with a bobcat hood.
https://seattle.craigslist.org/kit/cto/d/belfair-willys-flatfender-jeep/6969973433.html
“1952 willys jeep project. Getting rid of some projects. Had a buick 215 v8 but it was pulled before I bought it. All the parts are there but it is seized. Very straight with little rust in the floors. Has a pto setup hooked to dana 18 tcase.”