Looks like a good price on a racing shell.
https://www.facebook.com/marketplace/item/518935839726420/
“70s style fiberglass jeep tub skin located in Clintonville”
CJ-5 Fiberglass Shell Minocqua, WI $600
0
Fiberglass Research Archives
1953 CJ-3A? Anacortes, WA $5000
The seller’s reference to the Bobcat of the 1950s is incorrect. This is the “bobcat” jeep from the 1950s. The Bobcat body wasn’t developed until 1969.
https://www.facebook.com/marketplace/item/3493101964147415
“1953 Jeep willys bobcat the body is all fiberglass it was a proto type for throwing out of planes but never were produced. This has a ford 302 v8 that runs strong it needs work here and there but nothing major. Im putting a new clutch and brake master cylinder on tommorow. I have title in hand and it has collector plates hollar if you have any questions.”
Year? CJ-3B? w/ Unusual Parkette Body Blue Ridge, GA $2500
UPDATE: Still Available. The serial number is included, so the year should be estimate-able.
(06/22/2021) Given the front clip, this might be a 3B chassis, though the Parkette body is a low-hood version.
The seller is correct about Paul Parker and the body. But, I believe this is the first version of this particular style that I’ve seen. It lacks the side stripe, has fender extensions, has a little different PARKETTE design on the back, has an extra wide lip around the rear, and looks like it has a side step. Very interesting.
https://nwga.craigslist.org/pts/d/cherry-log-willys-jeep-with-parkette/7474769927.html
“Rare, rare, rare. 48/49 Willys Jeep with Parkette fiberglass body. Believed only a handful made while Paul Parker was back in Georgia. This one is a bit odd as it doesn’t have the “line” above the fender but it does have flared fenders; the Willys nose panel is original equipment. Not sure it’s on the right size frame at the moment but we do have an original Willys bare chassis on the property we can work into the deal.
Engine/trans present. Very cool project. Needs finishing. No title. Bill of sale only. If the ad is up, the Willys is available.”
1948 CJ-2A Richwood, OH $8500
Has a fiberglass body with other updates.
https://www.facebook.com/marketplace/item/507487920727171
“1948 Willy’s. 4×4 has fiber glass body since original rusted out, but original engine, trans, transfer case, axles, etc. Windshield and windshield frame are original as well and do still fold. Runs and drives great. Sitting on 35’s. Everything works as it should. Seats are removable for easy clean out. Fires up everytime and will definitely put a smile on your face! Yes it does have a title”
1953 CJ-3A(?) Casey, IA $1750
UPDATE: Still Available.
(03/08/2022) This fiberglass body has an extra wide rim. I don’t recognize the manufacturer.
https://www.facebook.com/marketplace/item/693858568283032
“Fiberglass body and floor,cj2a frame and steel fenders,hood and windshield frame. NO TITLE OR ENGINE, TRANSFER, TRANSMISSION. Possibly trades. Thanks for looking.”
1952 CJ-3A Asheville, NC $9500
This project is unusual in that the body is chromed fiberglass with rivets.
https://asheville.craigslist.org/cto/d/asheville-52-willys-cj3a/7462385356.html
“I’m selling my project car of 15 years! I’ve misplaced my passion and ready to turn over my collector piece to someone willing and able to complete the last remaining items- if you have a garage, a few tools and a couple weekends- you can be the owner of this one of a kind Willy’s.
Details:
1952 Willy’s CJ3A
Clean title
F head engine ( 0.0 TSO- overhauled at professional shop)
Fiberglass body with chrome and rivets.
New leather upholstery front and back Continue reading
1953 CJ-3B? Mattawan, MI $1750
UPDATE: Price dropped to $1750.
(07/30/2021) This may actually be a CJ-3A? The body is fiberglass.
https://kalamazoo.craigslist.org/pts/d/mattawan-1953-willys-cj3b/7458374776.html
“Collection of parts to build a 1953 Willy’s cj3b. Fiberglass tub, frame, axles. I have the transmission case but am missing internals. Complete transfer case, pto drive. Radiator, No motor.
Only body part missing is a hood. Also have the title.”
1954 CJ-3B Phoenix, AZ $9500
UPDATE: Still Available.
(02/20/2022) This fiberglass body may be the 3B Bobcat version. It’s got the wide brim in the back and the long steps. But, it is difficult to tell for sure.
https://www.facebook.com/marketplace/item/223967499903358
“1954 willys jeep. 351 Ford
C4 automatic transmission
Power steering
Lockers
Dana 44s
Air conditioning
Fiberglass tub
Asking ninety 5 hundred”
Fiberglass Tub and Parts Stoughton, MA $1200
The tub looks in very good shape. I would guess the seller is correct, that this is an older lightweight California tub similar to one I had from the 1970s. ‘$1200 gets you everything. $1000 just gets you the tub.
https://boston.craigslist.org/sob/pts/d/stoughton-fiberglass-willys-jeep-tub/7439939130.html
“We have available a fiberglass replacement tub for a flat fender Willys Jeep.
I believe this is for a CJ2A / CJ3A setup…but, maybe it also fits military MB M38 Ford GPW? Even though they had the high hood and slightly taller cowl I think it could potentially fit CJ3B , too?? The last photo shows the height of the cowl.
Doing some searching online I see ACME & Brian Chuchua’s may have made them at one point…but otherwise I don’t know the manufacturer.
This was from a project that started, but never fully mounted. Some holes were started on the firewall, and the fenders look like they started to get cut on the inside, but otherwise it’s still relatively “new”. Has some extra metal brackets / supports for around the firewall. It’s relatively light, but still feels solid.
Also available/included was a Bestop soft top (just the skins & doors no frame work) and 2 black front seats.
$1200 for everything or
$1000 for the body tub with fenders (I shouldn’t have to say this but CASH ONLY no electronic payments or checks!!)”
1946 Drag/Dune Jeep Cle Elum, WA $5500
This could have a Bobcat shell body.
https://www.facebook.com/marketplace/item/223529036307712
“SD 7AL-2 with two step full wiring/gauges/switch panel. Dana 60 rear end/, 6:17 gears/with spool. 2WD. Full float leaf spring suspension with ladder bars. Reverse shackle with straight axle front end. TIRES/WHEELS/WHEELIE BARS NOT INCLUDED ($3k price drop). 12 point cage, five point harnesses, suspension race seats mounted on cage, Seat covers in excellent condition. Halon full suppression (extinguisher) system. No motor. Set up for SBC on alcohol or gas, plus power glide or TH 400. WILLING TO PART… OBO”
3 Jeeps & 1 Fiberglass Tub North Aurora, IL **SOLD**
UPDATE: **SOLD** Was $5000.
It appears all three jeeps and the tub are included in the price.
“3 jeeps 1 glass tub extra motors.2 titles”
1953 CJ-3B Salem, OH $3500
This is a 3B with a low hood fiberglass body.
https://www.facebook.com/marketplace/item/392643898982822
“1953 Jeep CJ3b with a CJ2a fiberglass body. Ran when parked. Engine isn’t stuck. 3500 obo.”
1946 CJ-2A Katy, TX $4000
UPDATE: Price dropped to $4000.
(11/05/2021) Looks like a good price. Has a fiberglass body (possibly a Bobcat body). Sounds like it has a non-functional overdrive.
https://houston.craigslist.org/cto/d/katy-1946-willys-cj2a/7401729879.html
“Selling my project CJ2A. I just don’t have time to work on it.
Vehicle runs and drives, but I overjetted the carb when I brought it down from Colorado, so it’s very rich and hard to start.
Jeep features:
full fiberglass tub and hood
a buick oddfire v6 swap
transfer case overdrive (currently non-functional)
tilt steering
electric fuel pump
besttop soft tub and full soft doors (not pictured but included)”
1946 CJ-2A Darby, MT $2500
I don’t recognize this fiberglass body. The floor style is unlike any I have seen. It looks nicely designed, with a wider-than-stock rear brim for additional style and strength. It looks to have a Buick V-6 with headers and, possibly, an Edelbrock intake.
https://missoula.craigslist.org/cto/d/darby-1946-willy-tk-project/7397892180.html
“1946 Willy Tk project. Has a fiberglass body. $2500 obo. Title in hand”
1947 CJ-2A Sylva, NC $7000
Rare Parkette Bodied east coast jeep with, possibly, a rare bobcat tear drop hood. It’s a bit expensive for a project.
https://www.facebook.com/marketplace/item/1623201871344976
“Needs steering linkage and carb clean has small block 350 munchie 4 speed front and rear lockers built for mud racing been sitting awhile the body is fiberglass very light needs a good bath other than that it would make a great toy or weekend cruiser clean title pm if have any other questions 7000 obo ”
1950 CJ-3A Warwick, NY $8889
UPDATE: Price dropped to $8999.
(05/28/2021) The body is fiberglass.
https://www.facebook.com/marketplace/item/350789533104781/
“Beautiful 1950 Willys cj3a (glass tub) fully functional 4WD lights rear blinkers. Original motor runs like a dream. Brand new brakes,fuel pump,and battery installed $10,500 obo”
1952 Flattie Issaquah, WA $24,997
Lots of custom work on this stretched jeep. This may have a modified DJ-3A convertible windshield.
https://seattle.craigslist.org/est/ctd/d/issaquah-1952-willys-jeep-custom-off/7377672038.html
“This is an extremely custom 1952 Willys Jeep that has been extensively modified and is capable as a street, strip, or sand dune use.
It was a frame-off resto-mod project which features a boxed chassis, fabricated roll cage (certified), custom four link for rear suspension, and laser checked frame.
The engine is a professionally built (balanced and blueprinted) GM V8 Aluminum 406 ci / 7.0L block with aluminum DART heads, pro-comp high lift cam, Forged crankshaft/rods/pistons, and oversized oil pan. It has an Edelbrock intake manifold with 850 cfm Holley carburetor, Hooker headers with detachable mufflers/tailpipes
1951 CJ-3A Salem, OR $8500
UPDATE: Still Available.
(06/24/2021) Looks solid. Has a fiberglass body.
https://salem.craigslist.org/cto/d/salem-1951-willys/7376232358.html
“1951 willys, Upgraded ! Newer frame , newer suspension, fiberglass body, 11″brakes, V6 , nostalgic daily driver. replaced odometer ,unknown miles .”
1946 CJ-2A Greensburg, PA **SOLD**
UPDATE: **SOLD** Was $6500.
This has a fiberglass body.
“Jeep runs, drives and stops as it should! Jeep has been in the family for a long time and has been used almost daily for the last few years. Good tires, brakes, new fuel pump, fiberglass body tub and Best Top. It does need a windshield glass.
I do have original steel body tub and fenders, but these are not included in the listed price.”
1949? CJ-2A? Covington, WA $5000
UPDATE: Price dropped to $5000.
Lots of updates to this fiberglass bodied jeep. This has a Bobcat fiberglass hood and may well have a Bobcat body, too.
https://seattle.craigslist.org/skc/cto/d/kent-1949-willys-cj2a/7345982967.html
“1949 Willy’s CJ2A. Original frame and grill, fiberglass body. Has 6 point cage tied into frame with 3 beard suspension seats and 4 point harnesses. VERY rare Koenig Arctic top included. Needs to be sand blasted and repainted but no real cancer spots. Motor/trans: carbureted Chevy 327 with new plugs, wires, and alternator, dual electric fans, freshly rebuilt TH 350 mated to a Dana 18 T Case. Running gear: Dana 44 front (Detroit) and rear (spool) with 5.13 gears. Disc brakes all around with dual Wilwood master cylinders. Riding on Rubicon Express YJ leafs SOA with trac bar. 35×15 with tons of life left.
1953? CJ-3A? Rigby, ID $1000
The glass body (looks like a light one) seems in good shape, though the hood has collapsed. The frame may be custom.
https://www.facebook.com/marketplace/item/516101382910293
“$1000 obo it has a title fiber glass body it’s not mounted has boxed frame and a short block v6 buick that is a builder it’s a project”
1946 CJ-2A Gloucester, MA $6800
UPDATE: Still Available.
(05/27/2021) This has a fiberglass body and a variety of other updates.
https://www.facebook.com/marketplace/item/1184167572004067
“Nice old Custom Willys Jeep with a Buick V-6 engine and Auto tranny with Hi and Low range a 4 wheel drive. It has a fiberglass tub in the rear with a new left front fender and new windsheild frame. Also has a custom roll bar as you can see. I have had the frame all restored and is in great shape. Also has custom front and rear bumper assemblies with tow hitches on the front and rear. Needs a little more work to make it an everyday driver. Have a Mass. Title for it.”
Drag Jeep Canby, OR $9500
UPDATE: Still Available.
(03/18/2021) This appears to have a Bobcat fiberglass body on it.
https://www.facebook.com/marketplace/item/476084010500371
1949 CJ-3A Molalla, OR $5500
The seller will be providing a different engine and tranny.
https://www.facebook.com/marketplace/item/4021488131283707
“49 willies jeep, was used as a sand truck but set up for a rat rod as well. Currently has Pontiac 400 and turbo 400 trans, Ford 9inch rear end with spool and 5.14 gears. Will come with Chrysler 440 and tf 727 trans with manual valve body. Pontiac engine and trans will be removed unless you want to pay 2500 more for that. Full fiberglass body.”
1953 CJ-3A Tucson, AZ $6500
UPDATE: Price dropped to $6500
(06/01/2020) This is a custom build with a fiberglass body. I assume it is registered as a 1953 jeep, hence the year.
https://www.facebook.com/marketplace/item/299359191565582
“Custom built Willys Jeep. Very fun to cruise, gets lots of attention! The perfect beer runner or pit cruiser. All tube chassis, fiberglass body. Ford 3.8 V6 with Ford auto trans, power steering. 2 wheel drive. New wheels, tires, seats, shocks, stereo, glass windshield, steering wheel, exhaust”
