Lots of updates to this jeep, including a Parkette fiberglass body and Bobcat fiberglass hood.
https://www.facebook.com/marketplace/item/5648060188565361
“Fresh 4.3 Vortec V6 Plus more”
Lots of updates to this jeep, including a Parkette fiberglass body and Bobcat fiberglass hood.
https://www.facebook.com/marketplace/item/5648060188565361
“Fresh 4.3 Vortec V6 Plus more”
The rear bumper and cargo rack appears to accommodate a horizontally stored tire.
https://fresno.craigslist.org/for/d/fresno-willys-jeep-4×4/7534433063.html
“1951 willys jeep low hood 12k winch,bucket seats, top,ect”
Powered by an f-head. It has an overdrive.
https://cars.ksl.com/listing/8137521
“1951 Willys CJ 3A. no title but will provide bill of sale. this Willys runs good. It has a weak starter but still fires up. It has the overdrive which is nice. I’ve drove it all over place for a few years now. Its getting too small for my family and our adventures so I’m selling it so it doesn’t just rot in the yard.”
Parts or project jeep with some early Free-Lock hubs.
https://eugene.craigslist.org/pts/d/eugene-1953-willys-cj3a/7533509262.html
“1953 Willys CJ3A project vehicle.
All kinds of parts for it, no engine though.”
UPDATE: Still Available.
(05/29/2022) The seller lists some of the problems that need to be addressed. It’s powered by an f-head.
https://spokane.craigslist.org/cto/d/deer-park-1949-willys-cj3a/7526965988.html
“1949 Willy’s CJ3A. Runs and drives great. I have an additional motor that came with it when I bought it from a 1960 Jeep, original hood and tow bar. Also, I have an extra set of wheels and tires to go with it. The body is in great shape. Little to no rust. The guy I bought it from wasn’t sure on the year, but said he dropped in an early 1960’s F4-134 F-Head motor. Everything works: four-wheel drive, transmission, lights, speedometer, oil-pressure, etc. Already has the classic license plates.
It is 73 years old, so there’s always room for improvement. The windshield is cracked, no e-brake (I have the housing), gas gauge doesn’t work (needs a new tank sending unit), muffler pipe is cracked and could use a weld, wouldn’t hurt to get a new battery. It’s been converted to a 12V system.
Overall, it’s a great Willy’s that isn’t rusted out. It’s been stored inside. Nice to drive to town or take into the mountains. Awesome hunting rig, just don’t have the time or storage anymore for it. $6,200 OBO. Looking for cash at the moment, no trades.”
This is a mix of parts and ingenuity.
https://www.facebook.com/marketplace/item/475912107779454
“1940s-1960s MB, GPW, Willys, CJ2A A lot of new parts, bearings, seals, gaskets, U joints, sandblasted frame and body plus paint, wiring and hoses/lines. You’ll have to come check it out to appreciate the work. Has been sitting awhile but will start and run. Good tires all around. Used it around the farm for fun but have no use for it anymore.”
UPDATE: This is back up for sale.
https://www.facebook.com/marketplace/item/628565248796965
(04/24/20217) Looks in good shape.
In excellent shape, no rust;
Motor has been rebuilt from the from oil pan up (have paperwork on rebuild);
Professionally hand-painted camo exterior;
Original Warner overdrive system;
Paid $300.00 for new heater;
Transmission rebuilt;
New clutch and pressure plate;
Garage kept;
Runs great;
New style hubs on it, still have old hubs;
Frame and body are in excellent shape, never been wrecked or worked on;
Emergency brake was removed to add the heater;
12 volt system with General Motors alternator;
Added a spotlight on the top;
Front passenger seat is removable with an under-the-floor storage compartment;
Has a rollbar;
Old 3-speed drive shifter + overdrive = 4 speeds
NOTE: The radiator is the original. It works but probably needs a new one.”
This looks to be a CJ-3A chassis with a CJ-2A body.
https://www.facebook.com/marketplace/item/1186108561980629/
“42 willys army jeep. Been in the shed the last 15 years. No title but ran when parked motor is not locked up”
UPDATE: Still Available.
Listed as a 1946, it looks like it might be a CJ-3A with an M-38 body. It also has a rear bed extender. Only the one pic provided.
https://www.facebook.com/marketplace/item/751554645985540
“Az willeys. cj2a communication military jeep complete needs restored”
This drag jeep is named “Wicked Willy”.
https://www.facebook.com/marketplace/item/2860049174303406
“This is a nostalgic Jeep Willy’s sand dragger with a clear title and matching VIN number. Small block chevy engine with a 350 turbo transmission. MSD 6AL ignition. Lots of good parts. Ford 9 inch rear end. 4link suspension and coil overshocks.”
Dave’s selling this custom build with a fiberglass body, unique fiberglass hood, and reversed springs.
https://www.facebook.com/marketplace/item/3349917061930694
“60’s cj5 frame and dauntless motor. 70’s t15 transmission and Dana 20 tcase. 70’s axles 4:27 gears. Disc brakes and power steering. All new clutch stuff with hydraulic master. Still needs some tweaking, maybe a different size master. Fiberglass body. Good title. Runs moves stops, but still a project.”
This has a government data plate, possibly military or former border patrol jeep.
https://www.facebook.com/marketplace/item/563066118936660
“Jeep willys 1952 Original engine Hydraulic steering (only changes) Antique license plate Street legal Odometer exempt Clean tittle Manual”
This might have a 2A body on it (I think I see the ignition switch hole on the dash for a 2A).
https://www.facebook.com/marketplace/item/1040171000194430
“1950 Vintage jeep willys, runs, original tires. Need gone Message for more info. Flathead 4, runs perfect, 4 wheel drive is good, needs steering box, no rust.”
Looks like a great price for a fun little rig. Note the disc brake on the transfercase.
https://www.facebook.com/marketplace/item/1452506678597037
“Willys .buggy. trail rig. Rock crawler. 4×4. Runs.drives.stops. pinion brake and 2 front brakes.twin stick.4 cylinder. No title. Dont message after 9pm or before 9am i wont return message. Dont ask dumb questions. If you dont have cash dont message.”
UPDATE: Still Available.
(08/10/2022) Unclear how much value this project has.
https://www.facebook.com/marketplace/item/1917441455113149
“1942 willys jeep project. Has the doors and everything to go with it, just don’t have the time to work on it, 1500 obo must pick up and loading available”
UPDATE: **Status Unknown** Was No Price
(08/28/2022) This might have a DJ-3A or a replacement body. The looks to be a V-6.
“I don’t have many details about the motor and trans, it is not running, but all parts you need are there, transmission and transfer case are installed in the jeep, I would have both rebuilt. It’s not a rust bucket and can be restored”
Listed as a 1946, this could actually be a 3A (or certainly looks like one).
https://www.facebook.com/marketplace/item/400696368272188
“This is truly a fantastic full body off restoration using most original parts. Very nicely done CJ-2 with good metal all around, in great running condition. Starts easily, strong original 4 cylinder engine,shifts nicely through the gears and the transfer case with lock out hubs is sound. It also has a nice top and sport bar. Not an original color, but attractively finished in a light metallic teal green with good seat upholstery. All glass and rubbers are excellent with 5 brand new tires and 5 clean, bright wheels. This is a turn key vehicle. The only things that need a bit (and I do mean just a bit)of attention are the gas gauge and the carburetor as it leaks a little. Everything else – wipers, lights, speedometer, etc. work fine. No signs of rust, rot or prior collision damage. Bargain priced for quick sale at $12000 or best offer FOB Broken Arrow, Okla.”
This has a replacement body.
https://www.facebook.com/marketplace/item/780877843056368
“Really clean jeep, it’s a project but is all complete. The motor is stuck and will need to be broke loose. Or I have a fresh rebuilt 4 cylinder motor I can throw in for extra money. Has a clean title”
UPDATE: **SOLD** Was $8000.
This seems worth a look.
“NO TITLE 1949 Willy’s cj3a mostly original. Newer tub and gas tank. Runs and drives. Needs brake work and gauges replaced. No rot. Price is firm”
Lots of color on this customized jeep. It is 2WD.
https://www.facebook.com/marketplace/item/431577639038410
“1950 Willy’s jeep custom new engine and rear end is out of a s10 new wheels and tries it’s got a shade Axle front end new gas tank new seats new Steering column New steering wheel and new Wheelie bars everything on it is new nothing is wrong with it no rust on it it’s a good Jeep pm for more questions.”
UPDATE: **SOLD** Was $8000.
Looks in good shape.
“1952 CJ3-A Willys Jeep. Runs well. Very little rust. Was converted to 8 Volt system at some point. Includes the original rims and tires and the original 6 volt items that were replaced plus miscellaneous parts. Bought from the original owner with actual? miles shown: 45,528. Replaced the brakes, carburetor, fuel pump, battery and misc. Title in hand. Call or Text for more info.”
Seller is looking for a trade.
https://seattle.craigslist.org/see/bar/d/ferndale-1951-willys-jeep-cj3a/7520634294.html
“Runs good, not rusty. Has 6 volt system still with an actual alternator and 6 volt optima battery. Original Go-devil Flathead 4 cylinder. New tires, carburetor, brake master cylinder, springs, shocks and shackles. It’s super fun.
I’m looking for a fiat 500, smart car, MINI cooper, Isuzu vehicross, scion XB, Nissan Cube
Kia Soul, casita camper. Off road teardrop maybe.
Maybe other stuff, throw an offer but if I don’t reply I’m probably not into it.”
Tom spotted this amalgamation of parts. Listed as a 1951 CJ-3A, this jeep has a DJ-3A front end, but the front crossmember suggests the frame is not from a DJ. The body could be DJ-3A. The engine isn’t, but it is stuck anyway.
https://www.facebook.com/marketplace/item/5273403332779471/
Flat Fender Jeep project. Titled as a 1951 CJ3A is 2WD. I believe it has a 283 Chevy engine in it but engine is stuck and I do not have time to mess with it. Has some rust, but good project. If listing is up it’s available and will not respond to that question.”
Listed as a 1947 CJ-2A, the body appears to be from a 3A, as it lacks the ignition switch hole on the dash. It also lacks frame horns on the front frame rails.
https://www.facebook.com/marketplace/item/813594109643512
“1947 Willys CJ2A. Starts, runs, drives, doesn’t stop real well. New master cylinder included. Engine; L4-134 “Go-Devil” Transmission; T-90 Transfer case; Dana 18 Front differential; Dana 25 Rear differential; Dana 41 I have upgraded to 12 volts. New alternator, New battery, new battery cables, new fan belt. I have gotten the title lined out in my name. With new reproduction Serial number plate, new reproduction body and frame tags and a new reproduction dash plate. Also has new in box steering linkage. Will need the wiring played with, lights, ignition switch and such. I have a video of it running on request”
UPDATE: Thanks to Craig for spotting it is actually a 3B tub.
It’s project.
https://www.facebook.com/marketplace/item/5064510890338507
“I’ve got a 51 willys Jeep that could be restored it has a good frame and body I got the windshield and seats and the front fenders just pm me with offers I got the title too”