Looks in very good shape. The hood is likely aftermarket as it lacks the Willys stamps.
https://miami.craigslist.org/mdc/ctd/d/hialeah-jeep-willy/7220000823.html
“1952 willy nice”
Looks in very good shape. The hood is likely aftermarket as it lacks the Willys stamps.
https://miami.craigslist.org/mdc/ctd/d/hialeah-jeep-willy/7220000823.html
“1952 willy nice”
Unclear how much value is here, but it looks like the body has been rebuilt.
https://lakecity.craigslist.org/cto/d/dunedin-1950-willys-jeep-project/7220624892.html
“Selling or will trade for motorcycle or jet ski. Built in my garage in Colorado. Moved to Florida and do not have a garage to reassemble and finish. 350 Chevy small block 4 bolt main. Lots of metal restoration, front fenders and grill are perfect. New frame rails, floor pans, leaf springs, shackles, Rancho 5000 shocks. Original 3 speed manual transmission, replaced input shaft to adapt to Chevy bell housing, needs steering and pedals. Have all original parts.”
UPDATE: Price dropped to $800.
(10/19/2020) A couple things with the seller’s notes. I agree this appears to be a CJ-3A, but the Dana 44 was introduced in late 1950 to the CJ-3A (not 1952).
https://victoriatx.craigslist.org/pts/d/victoria-willys-jeep/7220220622.html
“Was converted to chevy V8 and front saginaw manual steering (excellent upgrade if you’ve ever driven a stock one). Has 16” wheels and one of them appears to be original (date stamped 1953 military) it will need a replacement engine as the v8 block in it is apart and no good any longer. Jeep is rusty, modified, old and in need of extensive repair and restoration but is mostly all there. I do have the front fenders, they were only taken off to pull the engine out but I have lost interest and have too many other projects to finish first.
The firewall was butchered when the engine conversion was made but wouldn’t be too difficult to patch and repair with sheet metal and a little effort. Asking $1200, it has no title and I am not sure what year or model it is, my best guess 1953. It has the dana44 rear axle (means it is at least a 1952 and they quit building the low hood in 1953 and the gear ratio is 5.38:1 like most of them were throughout the years. It rolls easy but should be trailered because of age.”
Has a least a few mods.
https://fresno.craigslist.org/cto/d/fresno-jeep-for-sale/7215871414.html
“1951 Willys CJ3A Engine is 1962 Chev. 327 w/double hump heads, 4 sp. truck trans. Excellent body, for details, contact me. No trades, serious buyers bring cash.”
UPDATE: Price dropped to $5500.
Has a new body kit and a nice looking Ford 2.3L on a CJ-5 frame.
https://www.facebook.com/marketplace/item/3054624168151950
“This is a brand new 1951 Willys CJ3A body. It is on a 1975 CJ5 frame with 1977 CJ7 axles with disc on the front. Wrangler leaf springs. 1987 Ford 2.3 with a Rare C4 automatic (rebuilt) behind it. I have the transfer case, it needs rebuilt and you will of course need the adapter. New tilt column,new manual Saginaw box. No title.
Due to overwhelming interest I will add to the ad! Tub has been coated underneath with Master Series Silver and Black undercoating. It will NOT rust. It was even gravity flowed into the seams. New carb
Racer Walsh intake adapter
New tires
Aluminum wheels
Turbo Ford Valve Cover included
New drivers seat.
Used passenger seat.
I may have back seat frame, not sure.
New gas tank
No wiring or gauges
No windshield
No plumbing for coolant or brakes, brakes will need done
no pedal set
No heater etc
needs driveshafts done
Shackle hangars need to be bolted on.
All welding is done. needs a lot of little things to be finished but that’s what I can think of.”
UPDATE: Price dropped to $5500.
(05/24/2020) This has a variety of mods.
https://sfbay.craigslist.org/nby/cto/d/napa-1953-willys-jeep/7216271357.html
“1953 Willy’s Jeep Flat Fender
Clean title and registration
4wd
289 V8 Conversion
3 speed manual transmission with overdrive
Dual exhaust
Power steering
Locking front hubs
Dual fuel tanks
Carb rebuilt within last year
Front tow bar
Spare set of stainless steel front fenders included
Runs strong. Used primarily for hunting. Only parting with it due to lack of time.”
Seller’s title labels this a 1945, but it looks more like a 3A to me.
https://tulsa.craigslist.org/cto/d/okay-1945-willys-jeep/7213895587.html
“1945 Willys Jeep barn find. All original 4 cylinder engine and running gear. Engine will run but not sure about the running gear. Looking for best offer.”
UPDATE: **SOLD** Was $10,800.
(10/04/2020) Seems like it could be a very late 2A or early 3A.
“Jeep CJ3A. Original Willys from the 1940s. Super Quite 4 Cylinder Engine. Dry Wyoming 4×4. Been in the same family 40 years.Hauled many Deer and Elk out of the Mountains. Runs like a watch. Idles Smooth. Original Trans and Transfer Case. 4 750×16 tires and a good spare. This is Absolutely the Best almost no Rust Jeep CJ I have seen in 30 + years. Look at the Pictures. Warn Hubs, Windshield wipers. Dual tanks with a valve. Good old style Tow Bar. A military style rear jump seat. This is what your Grandfather and Father loved to take Afield.”
UPDATE: **status unknown** $14,500.
(08/23/2020) This has lots of mods.
“1951 Willys CJ-3A
4.3 Vortec V6
4L60E 4 speed auto
NP233 electronic shift Tcase with fixed yoke front and rear
Modified S10 frame
All steel body
Ramsey 9k winch
Tom Woods CV driveshafts
16” Sway-away coilovers with 3 Link front suspension
Old Man Emu Spring over rear with revolver shackles
Continue reading
UPDATE: Still Available.
(12/09/2019) Has an F-head.
https://phoenix.craigslist.org/evl/ctd/d/mesa-1952-jeep-cj3a-suv/7212638797.html
“Pictured is a 1952 4X4 Willys CJ3A in very good condition I keep it inside and it comes with a Kaiser metal hard top. It is registered, insured and I drive it a few times a month. I just gave it a tune up: oil change, greased, plugs, plug wires, carburetor rebuild, rebuilt the cooling system (radiator professionally cleaned, repaired, painted), replaced cooling lines and replaced water pump and fuel pump. This jeep has the higher powered F134 engine in it out of a CJ3B.”
UPDATE: **SOLD** Was $2000.
I’m not sure how much value is here.
“53 wilkys jeep project. Its a good start have toyota axles and a 302 Ford engine and trans. Have adapter to the Toyota t-case. The motor was ruffed into place. The tac welds broke when it was moved. Its a project. Have title in hand.”
UPDATE: Still Available.
(09/18/2020) Thoughts on what the rod in the dash controls? No description provided. Has some rust.
Body has had some work. The pedals are unusual.
https://www.facebook.com/marketplace/item/1486365968226018/
“Runs and drives. Everything works. Gets a lot of attention when we take it places. Willing to trade for side by side. I also have re trailer we use to haul it for an additional $1500.”
UPDATE: Still Available.
(09/20/20200 One runs, one has a title and the third is for parts.
https://www.facebook.com/marketplace/item/3222912661156042/
“Three Willy’s Jeeps and parts. The 52 runs and drives but doesn’t have a title. The 46 has a good title but isn’t running. The blue one is just for parts and doesn’t have a title. Comes with extra motors and axles. $2800 for everything. Located in Marion NC.”
Given the rear PTO, this may have some value.
https://www.facebook.com/marketplace/item/332318401407343/
“Cj3a willys with rear PTO Has not run in 20+years”
UPDATE: **SOLD** Was $4200.
Includes a parts CJ-2A. The 3A body has seen some work. I haven’t seen mini-terras on a jeep for sale for a while.
“1949 willys cj3a runs and drives have title in hand also comes with a cj2a for parts interested in trades for a nice side by side or 4×4 quad snow plow preferred also open to cash offers 4200 obo”
Seems a reasonable jeep at a reasonable price.
https://www.facebook.com/marketplace/item/347608296347527/
“Nice stock willys. Carb was rebuilt, new seat upholstery, steering wheel. Runs great, stops good, comes with some extra parts, spare tire and holder.”
UPDATE: Still Available.
(06/04/2020) Looks like a solid 3A with some updates. It appears to have Allstate Hubs.
https://www.facebook.com/item/583763688937444/
“1949 Willys Jeep CJ2A, 4 cylinder, 3 speed. rebuild, all original, no rust, Colorado title. Will deliver.”
This fiberglass Flattie is built on a shortened J-10 frame. See pics for description.
Has updates.
https://www.facebook.com/marketplace/item/939649543189763/
“This 1951 Jeep Willy’s has a ton of work done on it then made its way to the barn and hasn’t had any miles since. It had a new top, new motor, a bunch of work done to brake system, ford 289 v8, plus much more. It runs and drives like you would expect a 1951 Jeep to drive and is an absolute blast. It has been thrash and haven’t been stored outside at all. Title in hand.”
UPDATE: Still available.
Has some mods.
https://www.facebook.com/marketplace/item/677537593144593/
“1951 Jeep Willy’s up for sale or open to trades as long as it’s worth my Jeep. Send me your trades all I can say is no . I like older Ford trucks. I won’t mind having a little Ford car but open to other vehicles . So let’s see what happens.”
Needs some work.
https://phoenix.craigslist.org/evl/cto/d/mesa-1951-willys-jeep/7205459217.html
“Classic Willys Jeep has a 2.8l V6, T90 3speed trans with newer transfer case and larger front and rear axcles. Has wide 36″ tires and alumin craragar rims. however tires are rotted and one is blown out. Also has the desirable fiberglass body. I purchased to fix up but due to property I live at being up for sale I have to let someone else do this project. Unsure of engine issues as it did not run when I purchased it. It does turn over. no water in oil or in radiator. Great project for father and son or for off roading or steeet wise.”
Looks in good shape. Has a Meyer half cab.
https://spokane.craigslist.org/cto/d/pinehurst-1952-willys-jeep/7204814574.html
“1952 Willys Jeep in immaculate condition! New 9000 pound winch. Spare tire and Jerry cans. Twin stick transfer case. 4 cylinder.”
UPDATE: **SOLD** Was $15,000.
(09/16/2020) Looks nice. Has some updates.
“Fully restored 1949 Willys CJ3A. Only 5600 miles since restoration
Re-built Willys L-134 engine
WarnerT90/Spicer 18 transmission, transfer case, does leak a bit
Spicer 25 front axle 5:38 ratio
Re-built Dana 40 rear axle, 5:38 ratio(have a vibration at coast)possibly driveline ?
GM Saginaw steering box, New steering linkage, newer Jeep locking column
12 volt electrical, new Painless wire harness, GM 1-wire alternator
Auto Meter gauge set
High quality Beachwood Canvas vinyl upholstery, seat foam
Original Body, aftermarket hood, tailgate & right rear quarter panel
Up-graded with 11” drum brakes
Super lift leaf springs, shocks 2” lift
BFG Mud terrain tires, 33x10x15 black spoke steel wheels
Smittybuilt roll cage, silver vein power coated,
Warn locking hubs
Comes with extra engine core, misc. parts, have all receipts
Has won several awards at local car shows”
UPDATE: Price dropped to $9900.
(12/28/2019) Appears solid. Has a few updates.
https://dallas.craigslist.org/dal/cto/d/cedar-creek-1950-jeep-cj3a/7204609115.html
“1950 Jeep cj3a for sale by owner. 90% original in good running condition. All original drive train and everything works as it should including the 4 wheel drive. Original mileage unknown as it had a newer speedometer installed before I got it. Has many new parts including alternator, carburetor, seats, roll bar, bikini top, brake drums, shoes, wheel brake cylinders, tires, hood, head lights, turn signal lights, tail lights, and battery. Hate to let it go but it’s time to move on to the next project. Clean blue title, cash only.”