Looks solid, but needs brakes addressed.
https://www.facebook.com/marketplace/item/591578513168429/
“1949 jeep Willys CJ-3A. Runs and drives, but does not stop. Needs brake work. ”
Looks solid, but needs brakes addressed.
https://www.facebook.com/marketplace/item/591578513168429/
“1949 jeep Willys CJ-3A. Runs and drives, but does not stop. Needs brake work. ”
Apparently, this was an electric company jeep. The Keonig hardtop looks like it has kept the body in good shape. Note the early Free-Lock hubs.
https://www.facebook.com/marketplace/item/1420314012160524
“Electric Company Service Willys Jeep …This vehicle sold on Bill of Sale…No Title…But is in superb condition. This is a 1950 Jeep CJ3A with a Koenig Iron Works hard top that has rear sliding windows and roll up on the doors all in proper working order, this Jeep is equipped with a 100% bolt on hydrologic snow plow with a 6’ blade that works as it should. Wind shield is not broken and all glass good with the exception of a crack in rear right glass. This vehicle is NOT rusty and very strait and original . Will provide pictures with the spots of rust it does have. This vehicle was meticulously serviced and well cared for!
Jeep comes with: L head factory four cylinder engine. 3 Speed transmission. Spicer 18 twin stick transfer case. Factory gauges ALL working. New Diehard battery 8v. Carter carburetor. Turn signals and seat belts. Original Nomenclator plates. Rear snow chains. Factory horn that works. CB antenna base. Side mount spare tire holder. Brakes work well. 5.38 gears in differentials. Jeep does not leak but hydraulics on plow have slight leak. Smokes on start up . Has heater with fan switch that works intermittently. All fluids and spark plugs are fresh. Lights and wiper not operating at the time of this ad but plan on looking into them.”
Listed as a 1944 Willys/Ford, this has a variety of CJ parts, including the body, windshield, and other parts.
https://www.facebook.com/marketplace/item/854933176173639
“1944 Jeep. Runs good has strong ford six motor. Great for off road or around town. Current Colorado title and registration. Woodland park area. $7000 or best offer.”
Looks solid.
https://www.facebook.com/marketplace/item/681820117147732
“Professionally restored by army jeep specialist T90 transmission, 3 speed manual Transfer case is an 18 L head engine, otherwise known as a flathead, has been professionally reworked at an engine shop and has less than 100 miles on it- original mileage is 13k Dana 25 front axle Real axle Dana 44 PTO Carter w/o carburetor Choke and floor mounted foot starter Runs great, ready to drive home or out for a ride in the desert! (But can be delivered) The top shredded while bringing it up north, price reflects the need to buy a new one, still have all the hardware if your a do-it-yourselfer.”
This looks like it has gone through a full rebuild.
https://www.facebook.com/marketplace/item/3675520609385004
“1953 Willy CJ3A Newly frame up Restoration 95% Accurate. Has been converted to 12v converting original parts to 12v. It has to be seen and driven to truly know how a brand new Willys was to drive in 1953. Every nut and bolt are new. Come see it”
Given the extra body, this may be worth a look.
https://www.facebook.com/marketplace/item/298335703068602
“1949 Jeep with spare parts Does not run, no engine, has spare tub, fenders hood, springs, drive shafts, body rough on extra tub and rolling jeep. Can be used as parts or to put back together, have Transmission and transfer case that can be rebuilt with newer synchros and small bearing kits included, not all new bearings are there. This Jeep is not put together. Pictures show it will roll, but tub will have to be loaded separately. I have a Nevada Title that goes with it, but not in my name, it was signed by the previous owner. I will not answer to is it still available, once it is sold, it will be marked as sold and removed”
Unclear how much value is here.
https://www.facebook.com/marketplace/item/553495556879040/
“A 51 and 52 have 95 percent of parts for both asking 5,000 obo and would include a complete 2001 Wrangler jeep 4 cylinder for $5500 bill of sale on one of Willy’s and have paperwork to other Willy’s, 2001 bill of sale”
UPDATE: Price dropped to $2305.
Looks like someone did a spring-over on this one, but decided to keep the drivetrain dropped.
https://www.facebook.com/marketplace/item/1317085882519546
“1954 Willys Flat Fender With everything except the engine . Bought for a project just don’t have the time .”
Runs.
https://www.facebook.com/marketplace/item/2171525539723520/
“1949 willeys CJ2 on none opt with DMV does run and lots of spare parts (cam shaft , head , transmission , ECT. ) 4000.00 FIRM”
The seller has a lot of money into this, but the jeep remains in pieces. The pic below was taken prior to it being disassembled.
https://www.facebook.com/marketplace/item/244281111765795/
“Hello, I have a 1952 Willys CJ3A project for sale. I have had it for about 25 years now and don’t see myself finishing it anytime soon. So it’s time for it to move on. I have about $12k into it and it’s still in pieces. I bought the replacement panels and $4k in parts (see lists in photos). I also had engine completely gone through, machined, and professionally rebuilt ($3k) with hardened vavle seat so it is good for todays gas. It has a Dana 44 rear axle, original heater, professionally rebuilt front and rear driveshafts, and quite a few spare parts including a spare transmission and transfer case. I also have a full steel hard top (no side doors) and a half cab/doors. Have clean title too. I also attached a couple photos of when it was together. I would like to get $6k because there is $4k in parts on the lists alone, $3k in the engine, plus everything else. Open to offers/trades especially a for 55’-59’ Chevy/GMC truck driver/solid project. Goose neck livestock trailer w/lvg qrtrs.”
This has a variety of updates, including a Warn OD. Note the various controls installed on the top of the inner windshield.
https://cosprings.craigslist.org/cto/d/colorado-springs-1951-jeep-willys-m38/7682327790.html
“-Ford 289 v8 (rebuilt less than 500mi ago)
-C3 transmission w/ B&M shifter
-T18 transfer case with warn overdrive
-Tires with less than 1000mi
-Rebuilt carb installed with engine rebuild (could use a tune now that engine is breaking in)
-Electric fan
-Vented hood
-Heater
-Electric wipers
-Soft top was installed about 2 years ago and less than 1000mi. Jeep parked under carport since it was installed
-has rear seat
-Front seats don’t match
Jeep runs and drives but could use a carb tune/ choke adjustment and general check over from sitting. Hasn’t been driven more than 100miles in the last year.
I have many spares including a performance intake manifold, spare engine that needs rebuilt, spare carb that needs cleaned and rebuilt, non matching spare wheel and tire, rear tire rack that’s not mounted.
I thought I would use this in the mountains while camping but have barely driven it in the 3+ years I’ve owned it. It’s time to move on and let someone else enjoy it. Asking $6000 OBO”
This has a Porter & Reed hardtop. Seems there is value here.
https://cosprings.craigslist.org/cto/d/colorado-springs-1950-willys-jeep/7678309800.html
“selling a 1950 Willys jeep. Has 134 cubic inch flat head 4 cyl motor needs a new starter and carburetor but engine turns. Has a hydraulic winch but needs to be rebuilt. Aftermarket hard top no doors. All in all its in pretty good shape for the age very little rust or damages. $4000 o.b.o.”
This drag jeep has a fiberglass Bobcat body.
https://www.facebook.com/marketplace/item/190540524085876
“Nice drag car with slicks and paddles. Well built sounds awesome. There’s been alot of money and time put into this ride. Has a built 350 with th400 narrowed 9″ rear B&M shifter to much to list. If you look at it you’ll buy it. 6000 or offer.”
Here’s an odd one.
https://www.facebook.com/marketplace/item/1297866277600228/
“So, this has been in my family for quite a while. Believe my great grandpa ‘created’ this back in the 80’s and would mainly use it as a hunting vehicle. To my understanding mostly all the exterior is fiberglass, cab space is mainly sheet metal, engine and chassis are from an old jeep (willys jeep or jeep CJ) sometime in the 1940’s-60’s. Price is OBO, if you think you have any info on the chassis and engine based on the pictures let me know, I would like to learn more about it myself. Have the cylinder head and other parts but are in kind of rough shape as you could assume”
Engine is stuck.
https://www.facebook.com/commerce/listing/865529394886068
“1949 Jeep Willys Jeep CJ3A. Been sitting since early 80s, have Dana 25 axles to swap with a willys wagon frame. The willys is 100% complete down to the key and 6v battery from the 80s. The motor is currently stuck but has been bathing in mystery oil the last few months. It was parked due to front axle situation. No title but your local tow yard can get you one for cheap. The frame is solid however tub has some rot, which is reflected in the price. If you are looking for an unmolested project, here is your chance! ”
UPDATE: Still Available.
(10/10/2023) It’s a project that sounds like it must be sold.
https://yakima.craigslist.org/pts/d/naches-1953-willys-cj-3a/7667895223.html
“Selling my jeep due to divorce. I started complete down to frame restoration, I did all the no fun work leaving only the fun remaining. I have every nut and bolt. L 134 FLATHEAD MOTOR, I purchased 2 years ago and drove it home for disassembly, have changed the oil and filter, ready to roll. New carb, complete brake overhaul including new wheel cyclinders, shoes, springs, etc.. new master cylinder, radiator refurbished, new wiring harness, new ignition spark plug ignition wire set, fuel sending unit, speedo cable, brake lamp switch, anti squeak kit, body mounting rubber kit, accelerator linkage kot with throttle rod, many new parts im forgetting. frame wire brushed, painted, Cab rhino lined, bumpers, gas can spare tire rack sandblasted and powder coated. Entire body soda blasted and painted. Have original seats and custom seat with roll bar. I also have the overdrive for it. Have oringinal hard top, tires, doors, etc..This can be one nice jeep and actually already is. Just needs someone to complete it. I paid 7500 for it, prolly have another 2500 (at least) in new parts, and too many hours to mention.”
This has a government plate on the dash.
https://www.facebook.com/marketplace/item/873081710594716
“I KNOW IT ISN’T a JEEP PATRIOT but FB doesn’t list Willys and you can’t post an add unless you select SOMETHING so… Frame and tub are in pretty good shape. Needs motor. Rolls and steers easily. If you are looking to restore this model or make it an army jeep this is a pretty good platform to start with. Body panels are in good shape and the tub floor needs some work but is fairly solid. Frame underneath looks okay. This was supposed to be a restoration project but I realized I don’t have the knowledge or time so I would like to pass it on to someone else before the snow flies. Sat indoors for many years until about two years ago. Stays covered since. No title.”
UPDATE: **SOLD** Was $2500.
Unclear how much value is here.
“1952 jeep willys rat rod jeep. We bought it to finish it and just don’t have the time It has 305 with automatic trans got a 350 to go with it it ran when I parked it. I have the front gril and radiator which I just had worked on”
UPDATE: **SOLD** Was $5000.
The CJ-2A’s body is wood from a Sears & Roebuck kit. Seems we have run across one of those kits before.
“Package deal of tona of parts and three Willy’s Jeeps. One ’47 CJ2A (white) complete but half the body is a plywood kit from Sears Roebuck. No title. Engine has lots of rust but repairable with a hot tank and time. Needs work but good frame and lots of good parts, or make it run again if you want.
One ’47 CJ2A just the body have the windshield, fenders, grille, seats, tailgate, and other metal for it.
And one ’50 CJ3A complete with title runs and drives but has bad tires, no brakes, no steering (the front crossmember is busted off, planned to chassis swap with the white 2A.) Grille is unbolted as is left fender to work on car. Has new starter and new ignition parts. Runs like a top stock fuel pump even works.
Planned to use the running gear from green one, body of the tub and parts, and chassis from the white one to make one nice stock jeep easily then use the remaining parts to build the remaining parts into crawlers or something fun.
Parts include:
Engine block in good shape will need cleaned up, cranks, cams, pistons, rods, oil pans, transfer cases, I think transmission, drive shafts, radiator, tons of body metal such as hoods fenders doors windshields (including glass) tailgates, parts to put a canvas top on, basically three entire jeeps worth of parts including lots of new parts worth ~450 from Kaiser Willy’s with receipt.
May split stuff. Yes the VW stuff is for sale too.
Seller will sell both for $2500 or $1250/each.
https://www.facebook.com/marketplace/item/243928811615237
“Both Jeeps are not running, but have complete engines and drive trains. Will sell separately. $1250 each, OBO.”
Update: **SOLD** Was $7500. …. Navy, not Air Force like I mistakenly put down. I saw the plane on the back and didn’t look closer.
This appears to be an Navy-themed CJ-3A.
“Frame-off rebuild by a shop instructor, lovingly. F-head, 134 CID, 4 cylinder “Hurricane.” Runs great with a nice warm-up. Seats, Lock-out hubs. No top. More pictures on request. 7500 OBO”
Not sure what model of top that is.
https://www.facebook.com/marketplace/item/818564979930622
“Been garage kept for last 20 years comes with few extra parts including two Willy’s industrial L134 engines has had top doors and heater. Has clean title”
I assume “loose” means the engine is free?
https://www.facebook.com/marketplace/item/842382743717981
“1951 Willys Jeep with snowplow blade. 4 cylinder. Chevy motor is loose. Body is in good shape. Bill of sale. No title.”
A parts jeep that might be worth a look.
https://www.facebook.com/marketplace/item/245500894721821/
“1949 CJ3A body, frame, axles. Nice patina. Some extra parts included. No title. Price is firm.”
Unclear if there is much value, but appears to have an early head.
https://www.facebook.com/marketplace/item/986019492482178
“195? Willys CJ3a non running project jeep. Missing data plate will come with bill of sale. Located Auburn,AL”