DJ-3A body on a 4WD chassis?
https://www.facebook.com/marketplace/item/402087830705607
“Willy’s Jeep needs work only real rust is by doors on floor pan”
DJ-3A body on a 4WD chassis?
https://www.facebook.com/marketplace/item/402087830705607
“Willy’s Jeep needs work only real rust is by doors on floor pan”
This may be a combination of MB/GPW and a CJ.
https://tulsa.craigslist.org/cto/d/okemah-1948-jeep-willys/6988951881.html
“1948 Jeep Willys. Runs. Great for putting around town or to use as a hunting rig. He’s hauled many a deer out of the woods! I have a clean title.”
Lacks the frame-to-bumper gussets, so it could be a very late 2A or a 3A.
https://greatfalls.craigslist.org/for/d/fort-benton-willys-jeep/6993304652.html
“1949 Willys jeep in good shape runs and drives good. Seat dosent come with it. All tires hold air all original 3 speed with reverse high low tranfercase. Clean title. Would trade for a willys wagon”
Could be a good price. It runs, but no brakes.
https://cars.ksl.com/listing/5946817?ad_cid=4
“Selling my willys Jeep cj3a! Awesome little Jeep that is in pretty good shape!! Not nearly as rusty or beat up as most I looked at when
I was in the market! Almost all original. Running and driving. The original flat head 4cyl starts
Up and runs good, I haven’t even cleaned the original Carter carb! (Although I’m sure it could use a carb clean and a tune up after sitting for many years) the original gas tank is not rusted out like most. The engine does smoke a bit but is very strong, I think it could be old gas in tank or oil making it smoke. The transmission shifts great and stays in all the gears. Clutch works as it should. Jeep drives straight. Brakes do not work!
Really neat Jeep that would be fun to clean up, I just don’t have time with a few other Jeep projects going on.
No scams.
First come first serve”
UPDATE: **SOLD** Was $4000.
(09/02/2019) Springs have been reversed. Could be worth a closer look.
“1952 Jeep Willys CJ3A Flat Fender Project – new primed hood, tub, fenders, tailgate; partially boxed frame, roll cage, powered saginaw steering box, new 33×12.50 Cooper mud terrain tires plus new steel black wheels, Dana 20 transfer case with rebuild kit (torn apart to rebuild), GM SM 465 4-speed transmission with adapter kit to Dana 20 t-case (partially rebuilt), new GM bell-housing and new clutch kit, Dana 44’s front and rear, new CJ5 gas tank, new bimini top, and Painless wiring kit.
Title in hand.
Currently moving and do not have time to work on project anymore.”
No pics provided.
https://losangeles.craigslist.org/sgv/pts/d/san-dimas-willy-jeep-cj-3-parts-car/6992287701.html
“Willy – Jeep Cj-3 Parts Car
1947 or so
Majority of vehicle present”
UPDATE: **SOLD** Was No Price.
This is located at Willys Works.
“Parting out a willys cj3a !!
Grille $150
Tub $250
Dana 44 rear axle $350
Dana 25 front axle $250
Frame $300
Transmission/ transfercase $550
Radiator $100
Starter $100
Generator $30
Wheels chrome spoke 15in $100
Roll bar $40
Jeep is located at willys works”
Listed as a 1951, this jeep has a replacement tub. It does not appear to have an M-38 frame; rather, maybe a CJ-3A frame with the PTO bar removed? This seems to be a mix of parts.
https://tricities.craigslist.org/cto/d/creston-1951-willys-jeep/6988525248.html
“Jeep has no rust. Is a Navy-issued jeep with plaques. Has granny gear. Needs battery and two new front seats. Call for milage and full VIN number (too long more than 17 characters). Jeep has original toolbox with tools, gas can on rear and full canvas top.”
Only one pic included. No pic of the “spare” jeep.
https://rochester.craigslist.org/bar/d/farmington-willys-jeep/6985509747.html
“1949 Willy’s CJ3’s for sale, $7500. Run and drives. Price includes two complete Willy’s, a spare original all redone body and several new parts still in boxes. Price is firm, I hate saying that but I hate the guys who waste your time even more.”
It’s a project, but the engine runs.
https://seattle.craigslist.org/sno/cto/d/snohomish-1951-cj3a/6988605807.html
“I have a complete and all original 51 CJ3A project jeep. Perfect for a full restoration back to original, not to cut it up to make wheeler.
Yes I still have it.
I don’t have anymore pictures, so don’t ask. If you’re a serious buyer you’ll just come look at it.
Clean WA title in my name.
Been sitting inside shop for last few years.
Tub does have some rust.
Continue reading
UPDATE: This appears to be still available.
(06/30/2019) Tom shared this oddity. This seems to be a late model DJ-3A body and windshield (design for a Koenig top) mounted on a (probably) CJ-2A chassis with a Meyer Half-top. That’s a combo I don’t think I’ve seen before.
https://www.facebook.com/marketplace/item/2168899259814527/
“Hubby final realized he does not have time to restore his dream toy so he sadly is selling ….1946 jeep willy. Does run does drive. Has and 1946 plate also. 5,000 or best offer. No tire kickers. Can be driven home….it has original drive train…Guess I forgot to say No trades…cash only!”
Looks like a nice rig.
https://cars.ksl.com/listing/5897760?ad_cid=15
“1952 Willy’s cj3a. Been in the family’s for over 40 years and has been a fun little toy. Body has recently been redone. Sitting on original running gear with a small block ford 260 v8 under the hood. 3 speed manual transmission with reverse and overdrive. 4×4 with manual hubs. Runs great drives great. It’s just time to let it go. Asking $8,500. Let me know if you have questions”
UPDATE: Still Available
(06/12/2018) Lots of updates.
https://www.facebook.com/marketplace/item/467096517168781/
“1950 Flat Fender 350 Chevy motor SM 420 4spd tans Dana 20 transfer case beautiful jeep must see”
UPDATE: **SOLD** Was $5000.
(06/11/2019) Could be worth a look.
“Lots of extras , v6 , headers, extra set 2 1/2″ lift springs, 1/ 2 doors ,new top , spare , back seat ,new gas tank & exhaust , tow bar, 4spd stick , good little jeep”
UPDATE: **SOLD** Was $10,500.
Listed as a military jeep, it appears to be a CJ-3A.
“1951 Willy’s Jeep restored and road ready. Age and arthritis keeps me from enjoying.great condition”
Has a variety of updates.
https://seattle.craigslist.org/see/cto/d/auburn-flat-fender-willys-jeep/6984390785.html
“Really nice Flat Fender. Nice paint
4 wheel disc brakes
Buick v6. HEI. New edelbrock 4 bbl carb and aluminum intake. Aluminum radiator
3 speed manual. Twin stick Dana 20
Interior perfect. Gauges lights work.
Soft top and doors. No rips in great shape
$9000”
UPDATE: **SOLD** Was $6500.
This could use some more overall photos. It likely has a replacement body (passenger side indents and no battery box in the cowl).
“1951 Willy’s Jeep. No rust, runs and drives. Solid. Very clean barn find. Asking $6500.00 OBO. No Solicitions accepted. I don’t need help selling this. Serious Inquiries only”
Maybe some value here.
https://sacramento.craigslist.org/pts/d/shingle-springs-rat-jeep-project/6981636923.html
“I’ve lost interest in my project so it’s time to pass it on…. . I’m not looking to get rich off this stuff I just would like to make someone a good deal on it.
Parts that I have are:
1950 Willy’s Jeep tub w/title & plates
A asphalt modified rolling chassis
A 454 bbc th400
And miscellaneous other parts to make it a cool rat rod. Thanks for
looking!!”
UPDATE: **SOLD** Was $3600.
(06/01/2019) Runs and drives, but is a bit rough.
“This is a great fun jeep. It has the original rebuild flat head 4 cly. It runs great. You can jump in This jeep and drive. It is not perfect but it is 68 years old. Selling to buy a UTV.”
Has a brand new 350 engine.
https://portland.craigslist.org/clk/cto/d/vancouver-1952-jeep-willys/6979599720.html
“This is a 1952 Jeep Willy ready for some additional love and fun. This has a brand new 350 motor with less than 100 miles on it. We replaced the steering gear box as well as the the steering linkage. We put a brand new disc conversion kit on the front. New power disc brake set up and aluminum radiator.
Picked up a new gas tank as well and has mustang seats for the front. We also have a rear seat that is not pictured. We put a turbo 400 tranny in this that only had 30,000 miles on it. Here are the things it still may need……not all the gauges work. There are no brake rear lights, but there is a brake switch on the brake pedal so just needs to be wired. Transfer case has never been worked on or replace so may need attention. You will also need to get the locking hub caps before being able to engage the front axle.
We are more interested in trading for something you may have that is KOOL……but must be KOOL. Here are some things that we would consider. Early air cooled Bug, Thing, or a scamp trailer.”
UPDATE: **SOLD** Was $12,500.
Has lots of mods.
“$12,500
Proflo fuel injected 350 Chevy with tuner and performance mods.
Sm465 transmission.
Dana 300 transfer case.
Kingpin 60 front, 5.13 gears, spool, 35-spline Yukon chromoly axle shafts with Yukon super joints, Yukon locking hubs, Ruffstuff diff cover, axle truss.
Dana 60 rear, 5.13 gears, spool, Yukon chromoly axle shafts, disc brake, Ruffstuff diff cover.
PSC double-ended full Continue reading
UPDATE: **SOLD** Was $9000.
Could use some body work.
“CJV-35 Drive train rebuilt 2004; 134 L motor; seats re-covered; fresh paint; one of one thousand made in 1950 for USMC, Recon Radio Jeep; lots of extras (wheels, tires, top, doors, steering wheels, gauges etc). Rebuild and service records from 2004 to present.’
Has a fiberglass body and mods.
https://www.facebook.com/marketplace/item/1346254268874405/
“1945 Willys Jeep fiberglass body. On a modified Jeep frame. I was told it has a Ford front and rear end. It is a roller no motor or transmission. No title but will be able to apply for a built title”