Jean de Preissac designed a variety of WWII postcards.
“Approx. 4″ x 6″ ( 10 x 15 cm).”
Jean de Preissac designed a variety of WWII postcards.
“Approx. 4″ x 6″ ( 10 x 15 cm).”
UPDATE: **SOLD** Was on eBay.
” Willys-Overland sales booklet. For panel delivery truck. About 1950. Still sealed with original sticker. Eight panels.”
Paul really seems serious about finishing his jeep! Below he shares photos and updates:
All sidewall and top upholstery panels have been installed so I began cutting foam for the front seats.
Still waiting on the carpet for the rear wheel well tops, the rear floor and the front seat footwell areas.
Here you’re looking at the rear window panel and the left rear wheel well. I think the gray fabric and the stainless steel look pretty good together.
I’m looking forward to getting the seats upholstered. The gray and blue seat colors should add a bit of color to the interior.
Front seats reinstalled, the foam is rough cut and the combination of thick foam for the bottom and thin foam for the back will allow enough room for me to reach all of the controls and still see out the windshield. The side windows are another matter. I should have Sumo-sized my Willys.
I don’t remember ever publishing these two ads.
“Original 1946 Willys Jeep For Business or Farm, the 4 in 1 ‘Jeep’ Does More Jobs…Tougher Jobs versatile 4-wheel drive ad. 2 pages. Please use the enlarge and zoom features to get a good look at the details.”
Only one of the story’s three pages is shown.
“ORIGINAL 3-page, magazine story
(consists of 2 full pages plus two half columns of text on 3rd page
Always original magazine pages…
never duplicates or reproductions of any kind
Approximate size: 8.5″x11.5″ (each page)
Condition: Excellent”
The April 1956 Willys News contains the story below about a Willys Truck that was transformed, using a purpose-built body, into a motor home.
UPDATE: **SOLD** Was on eBay.
Last year one of these was sold in segments. I bought one of those segments and I’ve seen some of the others. It’s a rare, pretty interesting book.
“This Product Merchandising Manual was made by Willys Motors Inc and Willys-Overland Export Corporation. This Has a Dated Price List 1955. The Original Binder is in OK Condition ,I Will Never Say Perfect.
I Noticed a Few Sections Missing ,,IE Wrecker , PTO Equipment , Sprayers ,Maybe Those Sections Went To Different Dealers.”
Here’s a neat vintage pin. No idea how old it is. Anyone know?
Naturally she’s driving a GPW. While Willys produced their jeeps in Toledo, Ford produced there jeeps at multiple locations, including Richmond, California.
“1943 Press Photo Bessie Harris drives jeep at Richmand Ford Plant”
UPDATE: Was $2000. Status Unknown.
Thanks to Doug for sharing this one. The motor is stuck. The brochure is likely rare.
“RERE STRUCK BEEP Garden Tractor with Snow Blade. Rust free and the nicest body you will ever find. Have all parts motor stuck. Have the book for it.”
Good news. The site is back up! Explanation on what happened to come ….
I haven’t had a chance to add posts from the recent few days, but this photo is from the April 1956 issue of Willys News. This CJ-3B certainly has an unusual crew setup!
Most folks don’t remember the movie the Conquerer, starring John Wayne and Susan Hayward. It was a Ghenghis Khan theme-movie, as it was a huge bust. The Conqueror movie was filmed in Utah locations such as Snow Canyon, St. George, Harrisburg, Warner Valley, and Hurricane during a 13-week stretch in 1954-1955 (source).
Unfortunately, what the movie is best known for is the unusually high percentage of deaths of the crew from cancer. The crew used some high powered fans to blow sands to simulate rough conditions. A documentary I watched suggested that disturbing the sand might have exacerbated the potential exposure to radiated materials.
You can read more in this article from People magazine: http://www.people.com/people/archive/article/0,,20077825,00.html
UPDATE: Here’s another rare book for sale.
“Ayers, Peggy Griffin; The Little Jeep
GLENDALE, CA, 1942
Published by GRIFFIN PATTERSON PUBLISHING
illustrations songs
Binding: PAPER BACK WHITE
Size: 6.25X8.75
22 Pages
Topic: Children’s books
Overall Condition is: FAIR
previous owner markings (rear blank cover child drawings), BOOK incorrectly bound all pages present some pages upside down, front and back cover staining and some missing pieces, front cover has crease on corners, over all browning, aged staining, spine tattered and missing some pieces,
REF#:065829”
View all of the sellers items on eBay
Trader Wooly and the Ghost in the Colonel’s Jeep is one of three books written by Tom Townsend. I’ve not read the book. According to his website, the series is “about army dependents growing up and going to middle school in West Germany. Trader and his friends seem to be getting in and out of trouble a lot. The books are historical fiction full of adventure.”
UPDATE: **SOLD** Was on eBay.
“MOUNTY IN A JEEP BY T.MORRIS LONGSTRETH,1949 THE MACMILLAN COMPANY. EX LIBRARY HARDCOVER,158 PAGES,APPEARS TITLE WAS HANDWRITTEN ON EDGE OF COVER,NORMAL COVER WEAR AND LIBRARY STAMPS,WRITING ON BLANK PAGE,”
This information is from a 2012 post:
The Southern Bank of Norfolk in Virginia thought the DJ-3A would make an excellent bank vehicle. Despite being outfitted with special locks and an ‘army-type’ lock box, the dispatcher did not look like a high security bank vehicle. Moreover, the bank might have been smarter not to put the bank’s name on the jeep. I would have liked a picture of the lock box. The article below was published in the June-July 1956 issue of Willys News.
I’ve heard of GIs grabbing distributer parts, but this is the first time I’ve seen a chain used as an anti-theft device.
“1945 Press Photo Col S.S. Archinlose chains his Jeep wheel to body of vehicle”
UPDATE: **SOLD** Was on eBay.
“Up for auction is a Marx “NELLYBELLE” Willys JEEP. Very old vintage steel toy. About 11 x 5.5 inches. The hood was fastened with nuts and bolts, see pictures for condition.”
There’s no model inside this box to verify, but the picture on the cover looks like the experimental CJ-2 (not the CJ-2A). Note the military grill, the tool indents, not gas inlet, and the bow holders on the side. Anyone know if the photo matched the model?
“Great dusty old relic from our WW2 past. Empty Civilian jeep “ACE” model jeep box.The Willy’s Jeep evolved into the CJ Jeep “The Civilian Jeep” because of it’s popularity during WW2. The box is discolored from age, and has a bit of paper peeled from one end, please view all photos as they are part of the description. The interior of box is pretty sound structurally. The box measures 8 1/8″ long, 3 1/8″ wide and 1 9/16″ tall. This little survivor would fit in well with a WW2 Collection.”
This model is a project, in that there’s no instructions. I looked over the parts and it seems like there’s enough here to make most of the jeep. However, I don’t see passenger seat nor a driver’s side fender.
“WWII Jeep scale unknown (parts only) no box or instructions/decals package”
Today the four 1956 Willys Newspapers in the mail I won on eBay arrived. There is lots of great stuff, both photos and interesting stories. I’ll be sharing them all in the coming weeks.
This first article from the page seven of the June-July 1956 issue tells the story of a retired couple by the name of Hawkins who readied a caravan for some cross country exploration. At the head of the caravan is a Fleetwood Caddillac. It pulls a camper-trailer that pulls a CJ-3B carrying a boat. Looks like they were ready for anything!
Bill Shaw is looking for some five lug tires for his 1/2 scale jeep project. If you comment below, I’ll make sure he get’s your info. Here are a couple links I found:
http://www.etrailer.com/Tires-and-Wheels/Kenda/AM30000.html
http://www.amazon.com/Kenda-Trailer-Tire-Wheel-Assembly/dp/B000GU40A0/ref=cm_cr_pr_product_top
Bill writes, “I am working on a ½ scale jeep, mounted on a John Deere garden tractor. The engine fits well and I am now working on the axles which I am lowering 6” (if you look on-line, most of these projects have an odd out of kilter high on running gear look). We (my son-in-law, grandson and I) are looking for 4.80/4.00-8 military looking non directional tread tires, 5 of them. If anyone has a lead please let us know – Kanda used to make them, I think. The photos are of a correct size wheel in place, the engine (just fits) and the front steering axle as I am lowering the spindles. We are going to use 5 lug trailer spindles and hubs on the front and on the rear I am going to modify 6” chain sprockets with wheel lugs for the drive axle.”
Scott has been testing the creation of small jeep parts using a 3D printer. He’s hoping to find options for the type of parts that aren’t sold by vendors. For example, you can see the wagon slider window and rear ashtray knobs he produced below. He tells me the 3D knobs he has produced look and feel like the real ones. You can see examples below that he’s made in different colors.
He’s also testing out the production of other small parts, including ones with a true chrome finish. If anyone has any ideas about hard or impossible parts to find, feel free to comment below.
These photos come from the Digital Archives of the University of Wisconsin. You can see all the jeep photos at the UW archives here and enter “jeep” into the search field.
The UW sits on the shore of Lake Mendota, so this photo might not have been taken too far from the University. I never got into ice-fishing when I lived in Madison, but lots of others enjoyed it.
This photo was taken by Pat Hitchcock during her time in the Red Cross. No village or date was mentioned, so I’m unsure if this was during WWII or later.
Pat Hitchcock sits in her jeep. “Red Cross Gals” is painted on the windshield. There’s no date on the photo, but I’d imagine given the license plate this was taken in the U.S?
No Wisconsin post would be complete without a badger. Here’s an extra-large badger towed by a jeep in 1987.